All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hartmut Hackmann <hartmut.hackmann@t-online.de>
To: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] TDA10086 fails? DiSEqC bad? TT S-1401 Horizontal transponder fails
Date: Fri, 11 Apr 2008 23:12:18 +0200	[thread overview]
Message-ID: <47FFD432.8020609@t-online.de> (raw)
In-Reply-To: <200804102240.13933@orion.escape-edv.de>

Hi,

Oliver Endriss schrieb:
> Hi,
> 
> Manu Abraham wrote:
>> Oliver Endriss wrote:
>> ...
>>> Ok, some calculations according your formula
>>>
>>>>>>> BW = (1 + RO) * SR/2 + 5) * 1.3
>>> 45 MSPS:
>>> BW = ((1 + 0.35) * 45/2 + 5) * 1.3 = 46
>>>
>>> -> cutoff 36 MHz (maximum value supported)
>>>
>>> 27 MSPS:
>>> BW = ((1 + 0.35) * 27/2 + 5) * 1.3 = 30,2
>>>
>>> -> cutoff 31 MHz
>>>
>>> 22 MSPS:
>>> BW = ((1 + 0.35) * 22/2 + 5) * 1.3 = 25,8
>>>
>>> -> cutoff 26 MHz
>>>
>>> Are these calculations correct, or did I miss something here?
>>
>> It looks fine, just round it off to the next integer. ie always round it
>> up, rather than rounding it down. For the cutoff at 36MHz, it is fine as
>> well, since at the last step, you will not need an offset, since it
>> would be the last step in the spectrum.
>> ...
>>> Afaics a simple pre-calculated lookup table with 32 entries should do
>>> the job. At least for the cut-off frequency.
>> That's possible, since you need only 32 precomputed entries, rather than
>> continuous values. That would be much better too, without any runtime
>> overheads. Just the table needs to be done nice.
> 
> Now I found some time to come back to this issue,
> 
> I prepared a small patch to set the cutoff according to Manu's formula.
> The calculation is simple enough for integer arithmetic, so it is not
> worth to prepare a lookup-table.
> 
> @ldvb:
> Please test and report whether it works for you.
> 
> CU
> Oliver
> 
I intended to do the same.
Since I have a patch for tda10086 which needs public testing as well, i
would like to propose this:
I do a static check and integrate the patch in my repository together
with my patch and ask for public testing.
Hope this will not overstress the few testers we have ;-)

Best regards
   Hartmut

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

  parent reply	other threads:[~2008-04-11 21:12 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-03-14 13:29 [linux-dvb] (no subject) ldvb
2008-03-14 13:33 ` Vladimir Prudnikov
2008-03-14 14:39   ` ldvb
2008-03-14 15:17     ` Vladimir Prudnikov
2008-03-14 15:24       ` [linux-dvb] TT budget S-1401 Horizontal transponder fails ldvb
2008-03-17 10:20         ` [linux-dvb] TDA10086 fails? DiSEqC bad? TT " ldvb
2008-03-18 17:38           ` [linux-dvb] TT-budget S-1401 issues. " ldvb
2008-03-20  0:18           ` [linux-dvb] TDA10086 fails? DiSEqC bad? TT S-1401 " Oliver Endriss
2008-03-20 16:33             ` ldvb
2008-03-20 20:55               ` Hartmut Hackmann
2008-03-20 21:14                 ` Manu Abraham
2008-03-20 21:57                   ` Hartmut Hackmann
2008-03-21  9:15                   ` Oliver Endriss
2008-03-21 15:43                     ` Manu Abraham
2008-03-21 16:55                       ` Manu Abraham
2008-03-22  6:11                         ` Oliver Endriss
2008-03-22 17:12                           ` Manu Abraham
2008-04-10 20:40                             ` Oliver Endriss
2008-04-10 23:33                               ` hermann pitton
2008-04-11 21:29                                 ` Oliver Endriss
2008-04-11 23:35                                   ` hermann pitton
2008-04-11 21:12                               ` Hartmut Hackmann [this message]
2008-04-11 21:36                                 ` Oliver Endriss
2008-03-21 18:36                     ` Matthias Schwarzott
2008-03-21 20:00                       ` Manu Abraham
2008-03-21 20:15                         ` Matthias Schwarzott
2008-03-21 20:47                           ` Manu Abraham
2008-03-21 23:25                             ` Matthias Schwarzott
2008-03-22  1:27                               ` Manu Abraham
2008-03-21 10:44                 ` ldvb
2008-03-21  8:56               ` Oliver Endriss
2008-03-21 10:56                 ` ldvb
2008-03-21 14:25                 ` ldvb

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47FFD432.8020609@t-online.de \
    --to=hartmut.hackmann@t-online.de \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.