From: Jan Kiszka <jan.kiszka@web.de>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] Re: [PATCH 3/3] x86: Rework local IRQ delivery for APICs
Date: Sat, 12 Apr 2008 18:49:55 +0200 [thread overview]
Message-ID: <4800E833.70309@web.de> (raw)
In-Reply-To: <4800DF7E.7070000@web.de>
[-- Attachment #1: Type: text/plain, Size: 796 bytes --]
Jan Kiszka wrote:
> [ Refreshed and resent version of
> http://permalink.gmane.org/gmane.comp.emulators.qemu/23456 ]
>
> This patch reworks the delivery of IRQs directed to a local APIC,
> handling all requests in a central function, apic_local_deliver(),
> analogue to apic_bus_deliver().
>
> Futhermore, the APIC_LVT_LINT0 mask initialization is fixed for SMP.
> Finally, virtual routing of the legacy PIT to the APICs is adopted in so
> far that pic_irq_request() delivers interrupts through the LINT0 lines
> of all APICs in the system. This routing allows for emulating the
> IO-APIC NMI watchdog mechanism, including on SMP, which Linux exploits
> via its nmi_watchdog=1.
>
> Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
>
Non-broken patch attached. Sorry.
Jan
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: rework-apic-local-delivery.patch --]
[-- Type: text/x-patch; name="rework-apic-local-delivery.patch", Size: 5012 bytes --]
---
hw/apic.c | 63 ++++++++++++++++++++++++++++++++++++++++++--------------------
hw/pc.c | 15 ++++++++++----
hw/pc.h | 3 ++
3 files changed, 57 insertions(+), 24 deletions(-)
Index: b/hw/apic.c
===================================================================
--- a/hw/apic.c
+++ b/hw/apic.c
@@ -166,6 +166,37 @@ static inline void reset_bit(uint32_t *t
tab[i] &= ~mask;
}
+void apic_local_deliver(CPUState *env, int vector)
+{
+ APICState *s = env->apic_state;
+ uint32_t lvt = s->lvt[vector];
+ int trigger_mode;
+
+ if (lvt & APIC_LVT_MASKED)
+ return;
+
+ switch ((lvt >> 8) & 7) {
+ case APIC_DM_SMI:
+ cpu_interrupt(env, CPU_INTERRUPT_SMI);
+ break;
+
+ case APIC_DM_NMI:
+ cpu_interrupt(env, CPU_INTERRUPT_NMI);
+ break;
+
+ case APIC_DM_EXTINT:
+ cpu_interrupt(env, CPU_INTERRUPT_HARD);
+ break;
+
+ case APIC_DM_FIXED:
+ trigger_mode = APIC_TRIGGER_EDGE;
+ if ((vector == APIC_LVT_LINT0 || vector == APIC_LVT_LINT1) &&
+ (lvt & APIC_LVT_LEVEL_TRIGGER))
+ trigger_mode = APIC_TRIGGER_LEVEL;
+ apic_set_irq(s, lvt & 0xff, trigger_mode);
+ }
+}
+
#define foreach_apic(apic, deliver_bitmask, code) \
{\
int __i, __j, __mask;\
@@ -502,10 +533,8 @@ int apic_accept_pic_intr(CPUState *env)
lvt0 = s->lvt[APIC_LVT_LINT0];
- if (s->id == 0 &&
- ((s->apicbase & MSR_IA32_APICBASE_ENABLE) == 0 ||
- ((lvt0 & APIC_LVT_MASKED) == 0 &&
- ((lvt0 >> 8) & 0x7) == APIC_DM_EXTINT)))
+ if ((s->apicbase & MSR_IA32_APICBASE_ENABLE) == 0 ||
+ (lvt0 & APIC_LVT_MASKED) == 0)
return 1;
return 0;
@@ -556,9 +585,7 @@ static void apic_timer(void *opaque)
{
APICState *s = opaque;
- if (!(s->lvt[APIC_LVT_TIMER] & APIC_LVT_MASKED)) {
- apic_set_irq(s, s->lvt[APIC_LVT_TIMER] & 0xff, APIC_TRIGGER_EDGE);
- }
+ apic_local_deliver(s->cpu_env, APIC_LVT_TIMER);
apic_timer_update(s, s->next_time);
}
@@ -821,12 +848,14 @@ static void apic_reset(void *opaque)
APICState *s = opaque;
apic_init_ipi(s);
- /*
- * LINT0 delivery mode is set to ExtInt at initialization time
- * typically by BIOS, so PIC interrupt can be delivered to the
- * processor when local APIC is enabled.
- */
- s->lvt[APIC_LVT_LINT0] = 0x700;
+ if (s->id == 0) {
+ /*
+ * LINT0 delivery mode on CPU #0 is set to ExtInt at initialization
+ * time typically by BIOS, so PIC interrupt can be delivered to the
+ * processor when local APIC is enabled.
+ */
+ s->lvt[APIC_LVT_LINT0] = 0x700;
+ }
}
static CPUReadMemoryFunc *apic_mem_read[3] = {
@@ -851,19 +880,13 @@ int apic_init(CPUState *env)
if (!s)
return -1;
env->apic_state = s;
- apic_init_ipi(s);
s->id = last_apic_id++;
env->cpuid_apic_id = s->id;
s->cpu_env = env;
s->apicbase = 0xfee00000 |
(s->id ? 0 : MSR_IA32_APICBASE_BSP) | MSR_IA32_APICBASE_ENABLE;
- /*
- * LINT0 delivery mode is set to ExtInt at initialization time
- * typically by BIOS, so PIC interrupt can be delivered to the
- * processor when local APIC is enabled.
- */
- s->lvt[APIC_LVT_LINT0] = 0x700;
+ apic_reset(s);
/* XXX: mapping more APICs at the same memory location */
if (apic_io_memory == 0) {
Index: b/hw/pc.c
===================================================================
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -113,9 +113,16 @@ int cpu_get_pic_interrupt(CPUState *env)
static void pic_irq_request(void *opaque, int irq, int level)
{
- CPUState *env = opaque;
- if (level && apic_accept_pic_intr(env))
- cpu_interrupt(env, CPU_INTERRUPT_HARD);
+ CPUState *env = first_cpu;
+
+ if (!level)
+ return;
+
+ while (env) {
+ if (apic_accept_pic_intr(env))
+ apic_local_deliver(env, APIC_LINT0);
+ env = env->next_cpu;
+ }
}
/* PC cmos mappings */
@@ -845,7 +852,7 @@ static void pc_init1(int ram_size, int v
if (linux_boot)
load_linux(kernel_filename, initrd_filename, kernel_cmdline);
- cpu_irq = qemu_allocate_irqs(pic_irq_request, first_cpu, 1);
+ cpu_irq = qemu_allocate_irqs(pic_irq_request, NULL, 1);
i8259 = i8259_init(cpu_irq[0]);
ferr_irq = i8259[13];
Index: b/hw/pc.h
===================================================================
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -39,8 +39,11 @@ void irq_info(void);
/* APIC */
typedef struct IOAPICState IOAPICState;
+#define APIC_LINT0 3
+
int apic_init(CPUState *env);
int apic_accept_pic_intr(CPUState *env);
+void apic_local_deliver(CPUState *env, int vector);
int apic_get_interrupt(CPUState *env);
IOAPICState *ioapic_init(void);
void ioapic_set_irq(void *opaque, int vector, int level);
prev parent reply other threads:[~2008-04-12 16:49 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-12 16:12 [Qemu-devel] [PATCH 3/3] x86: Rework local IRQ delivery for APICs Jan Kiszka
2008-04-12 16:49 ` Jan Kiszka [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4800E833.70309@web.de \
--to=jan.kiszka@web.de \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.