All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tilman Schmidt <tilman@imap.cc>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
	jgarzik@pobox.com
Subject: Re: 2.6.25-rc8-mm1: Intel SATA boot failure
Date: Mon, 14 Apr 2008 02:28:40 +0200	[thread overview]
Message-ID: <4802A538.9040107@imap.cc> (raw)
In-Reply-To: <20080403161733.c05dac53.akpm@linux-foundation.org>

[-- Attachment #1: Type: text/plain, Size: 900 bytes --]

Final report, seeing -mm2 is out:

- Netconsole works. (grumblestupidsusefirewallgrumble)

- The hang during boot only happens with kernels compiled with
  CONFIG_CIFS_EXPERIMENTAL=y
  It also doesn't always happen at the same point in the boot sequence.
  I'm suspecting it might be triggered by some network packet.
  Anyway, it's obviously *not* a SATA problem.
  (That was just me jumping to conclusions, because ...)

- That leaves only the messages

  ata1: port is slow to respond, please be patient (Status 0x80)
  ata1: COMRESET failed (errno=-16)

  and accompanying delays during boot, for each installed SATA disk.
  I'll try to find the time to retest this with 2.6.25-rc8-mm2.

Thanks,
Tilman

-- 
Tilman Schmidt                                  E-Mail: tilman@imap.cc
Wehrhausweg 66                                  Fax: +49 228 4299019
53227 Bonn, Germany


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 253 bytes --]

  parent reply	other threads:[~2008-04-14  0:28 UTC|newest]

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-02  4:32 2.6.25-rc8-mm1 Andrew Morton
2008-04-02  5:40 ` 2.6.25-rc8-mm1 Dmitri Vorobiev
2008-04-02  6:03   ` 2.6.25-rc8-mm1 Andrew Morton
2008-04-02 17:33     ` 2.6.25-rc8-mm1 (mips build failure) Christoph Lameter
2008-04-02 18:29       ` Andrew Morton
2008-04-02 18:33         ` Christoph Lameter
2008-04-02 19:06           ` Sam Ravnborg
2008-04-03 16:02             ` Ralf Baechle
2008-04-03 22:17               ` Christoph Lameter
2008-04-03 23:26                 ` Dmitri Vorobiev
2008-04-04 10:24                 ` Ralf Baechle
2008-04-04 17:36                   ` Christoph Lameter
2008-04-04 17:50                     ` Christoph Lameter
2008-04-02  6:04 ` 2.6.25-rc8-mm1 Valdis.Kletnieks
2008-04-02  6:15   ` 2.6.25-rc8-mm1 Andrew Morton
2008-04-02  6:25 ` [BUG] 2.6.25-rc8-mm1 kernel panic while bootup on powerpc Kamalesh Babulal
2008-04-02  6:25   ` Kamalesh Babulal
2008-04-02  6:39   ` Andrew Morton
2008-04-02  6:39     ` Andrew Morton
2008-04-02  7:08     ` Kamalesh Babulal
2008-04-02  7:08       ` Kamalesh Babulal
2008-04-02  7:17       ` Michael Ellerman
2008-04-02  7:17         ` Michael Ellerman
2008-04-02 17:09         ` Kamalesh Babulal
2008-04-02 17:09           ` Kamalesh Babulal
2008-04-02 18:15           ` Badari Pulavarty
2008-04-02 18:15             ` Badari Pulavarty
2008-04-02 19:22         ` Badari Pulavarty
2008-04-02 19:22           ` Badari Pulavarty
2008-04-02 21:57           ` Yinghai Lu
2008-04-02 21:57             ` Yinghai Lu
2008-04-02 22:24           ` Yinghai Lu
2008-04-02 22:24             ` Yinghai Lu
2008-04-04  9:24     ` Andy Whitcroft
2008-04-04  9:24       ` Andy Whitcroft
2008-04-02  9:02 ` [BUILD_FAILURE] 2.6.25-rc8-mm1 build failure on x86_64 with randconfig Kamalesh Babulal
2008-04-02 10:49 ` 2.6.25-rc8-mm1 Miles Lane
2008-04-02 11:08   ` 2.6.25-rc8-mm1 Valdis.Kletnieks
2008-04-02 16:58   ` 2.6.25-rc8-mm1 Chatre, Reinette
2008-04-02 19:15     ` 2.6.25-rc8-mm1 Valdis.Kletnieks
2008-04-02 16:20 ` 2.6.25-rc8-mm1 sparc64 build problem: size of array 'type name' is negative Mariusz Kozlowski
2008-04-02 16:20   ` Mariusz Kozlowski
2008-04-02 16:30   ` 2.6.25-rc8-mm1 sparc64 build problem: size of array 'type name' Andrew Morton
2008-04-02 16:30     ` 2.6.25-rc8-mm1 sparc64 build problem: size of array 'type name' is negative Andrew Morton
2008-04-02 19:12 ` 2.6.25-rc8-mm1 - BUG in fs/jbd/transaction.c Valdis.Kletnieks
2008-04-02 19:27   ` Josef Bacik
2008-04-02 19:39     ` Andrew Morton
2008-04-02 19:41       ` Josef Bacik
2008-04-03 18:18       ` Stephen Smalley
2008-04-03 23:02         ` James Morris
2008-04-04 12:46           ` Stephen Smalley
2008-04-06 23:54             ` James Morris
2008-04-04 10:15         ` Jan Kara
2008-04-04 12:53           ` 2.6.25-rc8-mm1 - BUG in fs/jbd/transaction.c' Josef Bacik
2008-04-03 18:25     ` 2.6.25-rc8-mm1 - BUG in fs/jbd/transaction.c Stephen Smalley
2008-04-02 19:30   ` Andrew Morton
2008-04-03  8:57     ` Jan Kara
2008-04-03 12:11 ` 2.6.25-rc8-mm1 Dave Airlie
2008-04-03 16:59   ` 2.6.25-rc8-mm1 Andrew Morton
2008-04-03 23:08 ` 2.6.25-rc8-mm1: Intel SATA boot failure Tilman Schmidt
2008-04-03 23:17   ` Andrew Morton
2008-04-09 14:29     ` Tilman Schmidt
2008-04-14  0:28     ` Tilman Schmidt [this message]
2008-04-14  2:05       ` Andrew Morton
2008-04-15 23:33       ` Tilman Schmidt
2008-04-04 20:16 ` usb unbind/bind => WARNING at fs/sysfs/dir.c [Was: 2.6.25-rc8-mm1] Jiri Slaby
2008-04-04 20:51   ` Greg KH
2008-04-04 21:23     ` Alan Stern
2008-04-05  3:46       ` Alan Stern
2008-04-05  4:37         ` Greg KH
2008-04-05 14:16           ` Alan Stern
2008-04-05  8:17         ` Jiri Slaby
2008-04-07  6:21 ` 2.6.25-rc8-mm1 - BUG: scheduling while atomic: swapper/0/0xffffffff Valdis.Kletnieks
2008-04-07  6:48   ` Andrew Morton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4802A538.9040107@imap.cc \
    --to=tilman@imap.cc \
    --cc=akpm@linux-foundation.org \
    --cc=jgarzik@pobox.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.