From: "John R." <johnr@wowway.com>
To: alsa-devel@alsa-project.org
Subject: [Fwd: Another unknown bt878]
Date: Tue, 15 Apr 2008 19:17:23 -0500 [thread overview]
Message-ID: <48054593.9000109@wowway.com> (raw)
This card is sold as the PV-981. I tried various digital_rate settings.
-------- Original Message --------
Subject: Another unknown bt878
Date: Mon, 14 Apr 2008 23:17:47 -0500
From: John R. <johnr@wowway.com>
To: alsa-devel@alsa-project.org
Sound doesn't work on my bt878 based card. Let me know what other
information is needed...
kernel 2.6.24.2:
Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa00:0x1460
Apr 14 20:28:38 server kernel: please mail id, board name, and, if it
works, the correct digital_rate option to <alsa-devel@alsa-project.org>
Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:00.1[A] ->
GSI 18 (level, low) -> IRQ 18
Apr 14 20:28:38 server kernel: bt87x0: Using board 0, analog, digital
(rate 32000 Hz)
Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa01:0x1461
Apr 14 20:28:38 server kernel: please mail id, board name, and, if it
works, the correct digital_rate option to <alsa-devel@alsa-project.org>
Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:01.1[A] ->
GSI 19 (level, low) -> IRQ 19
Apr 14 20:28:38 server kernel: bt87x1: Using board 0, analog, digital
(rate 32000 Hz)
Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa02:0x1462
Apr 14 20:28:38 server kernel: please mail id, board name, and, if it
works, the correct digital_rate option to <alsa-devel@alsa-project.org>
Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:02.1[A] ->
GSI 16 (level, low) -> IRQ 16
Apr 14 20:28:38 server kernel: bt87x2: Using board 0, analog, digital
(rate 3200
0 Hz)
Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa03:0x1463
Apr 14 20:28:38 server kernel: please mail id, board name, and, if it
works, the correct digital_rate option to <alsa-devel@alsa-project.org>
Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:03.1[A] ->
GSI 17 (level, low) -> IRQ 17
Apr 14 20:28:38 server kernel: bt87x3: Using board 0, analog, digital
(rate 32000 Hz)
lspci:
05:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
05:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
05:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
05:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
05:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
05:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
05:03.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
05:03.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
at boot:
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
bttv0: Bt878 (rev 17) at 0000:05:00.0, irq: 18, latency: 64, mmio:
0xdfcfe000
bttv0: detected: Provideo PV150A-1 [card=98], PCI subsystem ID is aa00:1460
bttv0: using: ProVideo PV150 [card=98,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: tuner absent
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv: Bt8xx card found (1).
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19
bttv1: Bt878 (rev 17) at 0000:05:01.0, irq: 19, latency: 64, mmio:
0xdfcfc000
bttv1: detected: Provideo PV150A-2 [card=98], PCI subsystem ID is aa01:1461
bttv1: using: ProVideo PV150 [card=98,autodetected]
bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv1: tuner absent
bttv1: registered device video1
bttv1: registered device vbi1
bttv1: PLL: 28636363 => 35468950 .. ok
bttv: Bt8xx card found (2).
ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 16 (level, low) -> IRQ 16
bttv2: Bt878 (rev 17) at 0000:05:02.0, irq: 16, latency: 64, mmio:
0xdfcfa000
bttv2: detected: Provideo PV150A-3 [card=98], PCI subsystem ID is aa02:1462
bttv2: using: ProVideo PV150 [card=98,autodetected]
bttv2: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv2: tuner absent
bttv2: registered device video2
bttv2: registered device vbi2
bttv2: PLL: 28636363 => 35468950 .. ok
bttv: Bt8xx card found (3).
ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 17 (level, low) -> IRQ 17
bttv3: Bt878 (rev 17) at 0000:05:03.0, irq: 17, latency: 64, mmio:
0xdfcf8000
bttv3: detected: Provideo PV150A-4 [card=98], PCI subsystem ID is aa03:1463
bttv3: using: ProVideo PV150 [card=98,autodetected]
bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv3: tuner absent
bttv3: registered device video3
bttv3: registered device vbi3
bttv3: PLL: 28636363 => 35468950 .. ok
reply other threads:[~2008-04-16 0:15 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48054593.9000109@wowway.com \
--to=johnr@wowway.com \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.