From: Marko Ristola <marko.ristola@kolumbus.fi>
To: bas@kompasmedia.nl
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Mantis 2033: tuning still fails
Date: Thu, 17 Apr 2008 23:11:24 +0300 [thread overview]
Message-ID: <4807AEEC.5040104@kolumbus.fi> (raw)
In-Reply-To: <da94aba5e3e1f0c3c823a33d94b32f9b@localhost>
Hi,
You could first try to use nonencrypted channels only by removing the CA,
to verify that it works without the CA.
Twinhan 2033 works for me wit jusst.de sources, although I haven't
tested the latest revision.
There exists remote control code also for 2033 although it hasn't been
applied into jusst.de.
Regards,
Marko Ristola
Bas v.d. Wiel wrote:
> Hello all,
> Slowly my Twinhan card is coming to life. Sadly though, tuning fails on all
> frequencies. I saw a post on this subject from a few weeks ago. Changing
> the tuner from tda10021 to tda10023 helped a lot in that case, but I have
> absolutely no idea how to do this. I looked over a lot of source code to
> see if I could find where the tuner chip gets determined, but to no avail.
> My C skills aren't good enough I fear.. The output of dmesg shows this:
>
> ACPI: PCI interrupt for device 0000:01:09.0 disabled
> ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low)
> -> IRQ 20
> irq: 20, latency: 32
> memory: 0xfdeff000, mmio: 0xde8c4000
> found a VP-2033 PCI DVB-C device on (01:09.0),
> Mantis Rev 1 [1822:0008], irq: 20, latency: 32
> memory: 0xfdeff000, mmio: 0xde8c4000
> MAC Address=[00:08:ca:1b:e8:b8]
> mantis_alloc_buffers (0): DMA=0x1d700000 cpu=0xdd700000 size=65536
> mantis_alloc_buffers (0): RISC=0x1cd56000 cpu=0xdcd56000 size=1000
> DVB: registering new adapter (Mantis dvb adapter)
> mantis_frontend_init (0): Probing for CU1216 (DVB-C)
> TDA10021: i2c-addr = 0x0c, id = 0x7d
> mantis_frontend_init (0): found Philips CU1216 DVB-C frontend (TDA10021) @
> 0x0c
> mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach
> success
> DVB: registering frontend 0 (Philips TDA10021 DVB-C)...
> CA: Registering Mantis Adapter(0) Slot(0)
>
> Any help would be greatly appreciated!
>
> Bas
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
prev parent reply other threads:[~2008-04-17 20:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-14 9:06 [linux-dvb] Mantis 2033: tuning still fails Bas v.d. Wiel
2008-04-17 20:11 ` Marko Ristola [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4807AEEC.5040104@kolumbus.fi \
--to=marko.ristola@kolumbus.fi \
--cc=bas@kompasmedia.nl \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.