From: mkrufky@linuxtv.org
To: mchehab@infradead.org
Cc: video4linux-list@redhat.com, linux-dvb@linuxtv.org,
gert.vervoort@hccnet.nl
Subject: Re: Hauppauge WinTV regreession from 2.6.24 to 2.6.25
Date: Fri, 25 Apr 2008 11:06:57 -0400 [thread overview]
Message-ID: <4811F391.1070207@linuxtv.org> (raw)
In-Reply-To: <20080425114526.434311ea@gaivota>
Mauro Carvalho Chehab wrote:
> On Fri, 25 Apr 2008 10:40:14 -0400
> "Michael Krufky" <mkrufky@linuxtv.org> wrote:
>
>
>> On Fri, Apr 25, 2008 at 9:56 AM, Mauro Carvalho Chehab
>> <mchehab@infradead.org> wrote:
>>
>>> On Thu, 24 Apr 2008 05:55:28 +0200
>>> hermann pitton <hermann-pitton@arcor.de> wrote:
>>>
>>> > > > >>>> I am testing a kernel upgrade from 2.6.24.to 2.6.25, and the
drivers
>>> > > > >>>> for the Hauppauge WinTV appear to have suffered some
regression
>>> > > > >>>> between the two kernel versions.
>>>
>>>
>>>
>>>> do you see the auto detection issue?
>>>>
>>> >
>>> > Either tell it is just nothing, what I very seriously doubt, or
please
>>> > comment.
>>> >
>>> > I don't like to end up on LKML again getting told that written rules
>>> > don't exist ;)
>>>
>>> Sorry for now answer earlier. Too busy here, due to the merge window.
>>>
>>> This seems to be an old bug. On several cases, tuner_type information
came from
>>> some sort of autodetection schema, but the proper setup is not sent to
tuner.
>>>
>>> Please test the enclosed patch. It warrants that TUNER_SET_TYPE_ADDR is
called
>>> at saa7134_board_init2() for all those boards:
>>>
>>> SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331
>>> SAA7134_BOARD_ASUS_EUROPA2_HYBRID
>>> SAA7134_BOARD_ASUSTeK_P7131_DUAL
>>> SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA
>>> SAA7134_BOARD_AVERMEDIA_SUPER_007
>>> SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM
>>> SAA7134_BOARD_BMK_MPEX_NOTUNER
>>> SAA7134_BOARD_BMK_MPEX_TUNER
>>> SAA7134_BOARD_CINERGY_HT_PCI
>>> SAA7134_BOARD_CINERGY_HT_PCMCIA
>>> SAA7134_BOARD_CREATIX_CTX953
>>> SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS
>>> SAA7134_BOARD_FLYDVB_TRIO
>>> SAA7134_BOARD_HAUPPAUGE_HVR1110
>>> SAA7134_BOARD_KWORLD_ATSC110
>>> SAA7134_BOARD_KWORLD_DVBT_210
>>> SAA7134_BOARD_MD7134
>>> SAA7134_BOARD_MEDION_MD8800_QUADRO
>>> SAA7134_BOARD_PHILIPS_EUROPA
>>> SAA7134_BOARD_PHILIPS_TIGER
>>> SAA7134_BOARD_PHILIPS_TIGER_S
>>> SAA7134_BOARD_PINNACLE_PCTV_310i
>>> SAA7134_BOARD_TEVION_DVBT_220RF
>>> SAA7134_BOARD_TWINHAN_DTV_DVB_3056
>>> SAA7134_BOARD_VIDEOMATE_DVBT_200
>>> SAA7134_BOARD_VIDEOMATE_DVBT_200A
>>> SAA7134_BOARD_VIDEOMATE_DVBT_300
>>>
>>> It is important to test the above boards, to be sure that no regression
is
>>> caused.
>>>
>>> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
>>>
>>> diff -r 60110897e86a linux/drivers/media/video/saa7134/saa7134-cards.c
>>> --- a/linux/drivers/media/video/saa7134/saa7134-cards.c Fri Apr 25
08:04:54 2008 -0300
>>> +++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Fri Apr 25
10:44:16 2008 -0300
>>>
>> Mauro,
>>
>> I didn't review your patch yet, and it needs to be tested, however,
>> the bug reported in this thread deals with the same regression that
>> you are attempting to repair, but on the cx88 driver -- not the
>> saa7134 driver.
>>
>
> Hmm... it seems that people merged two similar issues together, on
different
> drivers. At least, part of the reports at the thread were with saa7134
driver.
>
> I'll investigate if this solution will also work for cx88.
Mauro,
"...people merged two similar issues together, on different drivers..."
It was you -- did you forget?
cx88: http://linuxtv.org/hg/v4l-dvb/rev/2eb392c86745
saa7134: http://linuxtv.org/hg/v4l-dvb/rev/e7668fc3666c
I'm surprised that you don't remember this -- you pushed this to Linus
late in the 2.6.25-rcX, after I had strongly advised against this -- I
warned you that this may create regressions, needed thorough testing,
and was too risky a change to push into the middle of 2.6.25-rc
I hate to say, "I told you so" .... but.............
;-)
Lets get your fixes tested ASAP so we can fix 2.6.25-stable.
Regards,
Mike
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next prev parent reply other threads:[~2008-04-25 15:07 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-19 20:57 Hauppauge WinTV regreession from 2.6.24 to 2.6.25 Ian Pickworth
2008-04-20 0:47 ` hermann pitton
2008-04-20 9:15 ` Ian Pickworth
2008-04-20 11:20 ` Gert Vervoort
2008-04-20 12:26 ` Ian Pickworth
2008-04-20 13:06 ` hermann pitton
2008-04-20 16:18 ` Gert Vervoort
2008-04-20 21:16 ` hermann pitton
2008-04-24 3:55 ` hermann pitton
2008-04-25 13:56 ` Mauro Carvalho Chehab
2008-04-25 14:40 ` Michael Krufky
2008-04-25 14:45 ` Mauro Carvalho Chehab
2008-04-25 15:06 ` mkrufky [this message]
2008-04-25 21:48 ` hermann pitton
2008-04-25 23:41 ` hermann pitton
2008-04-26 11:59 ` Mauro Carvalho Chehab
2008-04-26 12:58 ` Ian Pickworth
2008-04-26 14:06 ` Mauro Carvalho Chehab
2008-04-26 22:10 ` hermann pitton
2008-04-26 23:19 ` Mauro Carvalho Chehab
2008-04-27 20:15 ` hermann pitton
2008-04-27 21:18 ` [linux-dvb] " Hartmut Hackmann
2008-04-28 1:01 ` hermann pitton
2008-04-28 14:21 ` Mauro Carvalho Chehab
2008-04-28 14:14 ` Mauro Carvalho Chehab
2008-04-25 15:03 ` Mauro Carvalho Chehab
2008-04-25 16:55 ` Gert Vervoort
2008-04-25 17:02 ` Gert Vervoort
[not found] ` <20080426090725.4a0fdcd4@gaivota>
2008-04-26 14:23 ` Gert Vervoort
2008-04-26 15:38 ` Mauro Carvalho Chehab
2008-04-26 16:59 ` Gert Vervoort
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4811F391.1070207@linuxtv.org \
--to=mkrufky@linuxtv.org \
--cc=gert.vervoort@hccnet.nl \
--cc=linux-dvb@linuxtv.org \
--cc=mchehab@infradead.org \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.