From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <481AD5C2.6030607@domain.hid> Date: Fri, 02 May 2008 10:50:10 +0200 From: Jan Kiszka MIME-Version: 1.0 References: <481AA6B5.9070508@domain.hid> <481AC93E.3030107@domain.hid> In-Reply-To: <481AC93E.3030107@domain.hid> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-help] MSI Interrupt Crash List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: rpm@xenomai.org Cc: xenomai@xenomai.org Philippe Gerum wrote: > jeff koftinoff wrote: >> Hi all, >> >> I am currently writing an rtdm driver for an fpga card. >> I am using the latest Xenomai version from the svn repository and kernel >> version 2.6.24.5. >> This runs on a Core2Duo with a debian 64 bit version. >> The driver seems to work fine as long as I use legacy interrupts and not >> MSI's. >> >> >> As soon as I use pci_enable_msi before rtdm_irq_request I get: >> >> [ 4260.359093] fpga_driver :MSI Enabled >> [ 4260.359095] fpga_driver :IORESOURCE_IRQ IRQ: 248 >> [ 4260.359109] Unable to handle kernel NULL pointer dereference at >> 0000000000000000 RIP: >> [ 4260.359113] [<0000000000000000>] >> [ 4260.359117] PGD 3b1f7067 PUD 3b1f6067 PMD 0 >> [ 4260.359121] Oops: 0010 [1] SMP >> [ 4260.359125] CPU 1 >> [ 4260.359127] Modules linked in: fpga_module(P) af_packet binfmt_misc >> rfcomm l2cap bluetooth ppdev ipv6 sbs container dock video output sbshc >> battery iptable_filter ip_tables x_tables ac coretemp max6650 sbp2 >> parport_pc lp parport atl1 mii i2c_core psmouse serio_raw button shpchp >> iTCO_wdt iTCO_vendor_support intel_agp pci_hotplug evdev pcspkr ext3 jbd >> mbcache sg sr_mod cdrom ata_generic sd_mod pata_acpi usbhid hid ohci1394 >> ieee1394 ahci pata_jmicron libata scsi_mod ehci_hcd uhci_hcd usbcore >> dm_mirror dm_snapshot dm_mod fan fuse >> [ 4260.359179] Pid: 7016, comm: insmod Tainted: P 2.6.24.5 #1 >> [ 4260.359181] RIP: 0010:[<0000000000000000>] [<0000000000000000>] >> [ 4260.359185] RSP: 0000:ffff81003b23dc80 EFLAGS: 00010246 >> [ 4260.359187] RAX: ffffffff805dc2c0 RBX: 0000000000000000 RCX: >> ffff810001018780 >> [ 4260.359189] RDX: ffff81008099a000 RSI: 0000000000000000 RDI: >> 00000000000000f8 >> [ 4260.359192] RBP: ffffffff882cc688 R08: 0000000000000000 R09: >> 00000000000000c1 >> [ 4260.359194] R10: 0000000000000000 R11: 0000000000000000 R12: >> ffff81003ee87800 >> [ 4260.359196] R13: ffffffff882cbee0 R14: 0000000000000000 R15: >> 000000000000000f >> [ 4260.359198] FS: 00002b43257436e0(0000) GS:ffff81003ec01700(0000) >> knlGS:0000000000000000 >> [ 4260.359200] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b >> [ 4260.359202] CR2: 0000000000000000 CR3: 0000000032168000 CR4: >> 00000000000006e0 >> [ 4260.359204] DR0: 0000000000000000 DR1: 0000000000000000 DR2: >> 0000000000000000 >> [ 4260.359206] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: >> 0000000000000400 >> [ 4260.359209] Process insmod (pid: 7016, threadinfo ffff81003b23c000, >> task ffff810032166fc0) >> [ 4260.359210] Stack: ffffffff8041e0ff ffff81003ee87800 >> ffffffff802c8a58 ffff81003ee87800 >> [ 4260.359216] ffff81003ee87800 ffff81003ee87800 ffffffff882ca374 >> 0000000000000000 >> [ 4260.359221] ffffffff882ca521 0000000000000001 ffff81003ee87870 >> ffffffff882cc1a0 >> [ 4260.359225] Call Trace: >> [ 4260.359231] [] rthal_irq_enable+0x2f/0x40 >> [ 4260.359236] [] rtdm_irq_request+0x48/0x60 >> [ 4260.359242] [] >> :fpga_module:pci_request_resources+0x104/0x1d0 >> [ 4260.359246] [] :fpga_module:pci_probe+0xe1/0x180 >> [ 4260.359250] [] pci_device_probe+0xf8/0x170 >> [ 4260.359256] [] driver_probe_device+0x9c/0x1b0 >> [ 4260.359259] [] __driver_attach+0xc9/0xd0 >> [ 4260.359262] [] __driver_attach+0x0/0xd0 >> [ 4260.359265] [] bus_for_each_dev+0x4d/0x80 >> [ 4260.359270] [] bus_add_driver+0xac/0x220 >> [ 4260.359274] [] __pci_register_driver+0x69/0xb0 >> [ 4260.359280] [] :fpga_module:card_init+0x37/0x64 >> [ 4260.359284] [] sys_init_module+0x18e/0x1a90 >> [ 4260.359293] [] _atomic_dec_and_lock+0x48/0x70 >> [ 4260.359298] [] param_get_int+0x0/0x20 >> [ 4260.359304] [] system_call+0x92/0x97 >> [ 4260.359308] >> [ 4260.359310] >> [ 4260.359310] Code: Bad RIP value. >> [ 4260.359313] RIP [<0000000000000000>] >> [ 4260.359315] RSP >> [ 4260.359316] CR2: 0000000000000000 >> [ 4260.359325] ---[ end trace 502b14894d3ed93b ]--- >> >> Any advice? >> > > Does this help? > > --- include/asm-x86/wrappers_64.h (revision 3719) > +++ include/asm-x86/wrappers_64.h (revision 3720) > @@ -31,8 +31,8 @@ > #define rthal_irq_descp(irq) (irq_desc + irq) > #define rthal_irq_desc_status(irq) (rthal_irq_descp(irq)->status) > > -#define rthal_irq_chip_enable(irq) ({ rthal_irq_descp(irq)->chip->enable(irq); 0; }) > -#define rthal_irq_chip_disable(irq) ({ rthal_irq_descp(irq)->chip->disable(irq); 0; }) > +#define rthal_irq_chip_enable(irq) ({ rthal_irq_descp(irq)->chip->unmask(irq); 0; }) > +#define rthal_irq_chip_disable(irq) ({ rthal_irq_descp(irq)->chip->mask(irq); 0; }) Will probably create a BUG on disable, as not all irq_chips define unmask IIRC. I'm still puzzled why the always-defined (in theory) default handlers for enable/disable do not work. Jan -- Siemens AG, Corporate Technology, CT SE 2 Corporate Competence Center Embedded Linux