From: Larry Johnson <lrj@acm.org>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH][RFC] pci: Remove CONFIG_PCI_SKIP_HOST_BRIDGE and Add check PCI class of host bridge
Date: Mon, 05 May 2008 11:34:20 -0400 [thread overview]
Message-ID: <481F28FC.3040103@acm.org> (raw)
In-Reply-To: <20080428170042.386ac2d6.iwamatsu@nigauri.org>
Nobuhiro Iwamatsu wrote:
> Hi, all.
>
> Sorry for the delay.
>
> On Fri, 18 Apr 2008 16:57:15 +0200
> Stefan Roese <sr@denx.de> wrote:
>
>>> The patch changes the behavior of the code _unless_
>>> CONFIG_PCI_SKIP_HOST_BRIDGE is defined. Defining that switch in the
>>> Korat configuration fixes the problem. The MPC8323ERDB configuration
>>> has also been patched to add the switch, so maybe this is is the cause
>>> of your problem as well.
>>>
>>> I was going to submit the patch for Korat, but then decided I'd first
>>> like to ask Nobuhiro and the group whether it might not be better to
>>> change the occurrences of
>>>
>>> #if defined(CONFIG_PCI_SKIP_HOST_BRIDGE)
>>>
>>> in "drivers/pci/pci.c" to
>>>
>>> #if !defined(CONFIG_PCI_NO_SKIP_HOST_BRIDGE)
>>>
>>> That would allow those boards that need to patch to specify it
>>> explicity, while leaving the default functionality unchanged.
>>>
>>> Comments?
>> Yes, I totally agree. Patches should *not* change the default behavior. We
>> should change it as you suggested. Sorry, I must have missed this.
>>
>> Nobuhiro, could you please send a new patch to fix this problem?
>
> Thank you for your check.
> It has troubled you with my patch.
>
> I rewirte new patch . Could you please check this patch and confirming the work?
>
> Best regards,
> Nobuhiro
Hi Nobuhiro, Stefan, and everyone,
Sorry for the delay in getting back to you. My mail reader thinks your
patch is part of your signature, so I missed it the first time around.
I did a quick check using the Sequoia board, and it looks like the patch
isn't working there. U-Boot is reporting the class of the bridge as
"0680", which I assume is why the patch doesn't skip it.
Nobuhiro and Stefan, do you think we can get a working fix for this into
1.3.3 (even if it is not the final fix)? If not, we should patch
Sequoia and Korat to add CONFIG_PCI_SKIP_HOST_BRIDGE so they won't be
broken in that release.
Best regards,
Larry
next prev parent reply other threads:[~2008-05-05 15:34 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-18 11:20 [U-Boot-Users] PCI stopped working on MPC8343 Andre Schwarz
2008-04-18 14:17 ` Larry Johnson
2008-04-18 14:27 ` André Schwarz
2008-04-18 16:51 ` Larry Johnson
2008-04-18 14:57 ` Stefan Roese
2008-04-28 8:00 ` [U-Boot-Users] [PATCH][RFC] pci: Remove CONFIG_PCI_SKIP_HOST_BRIDGE and Add check PCI class of host bridge (Re: PCI stopped working on MPC8343) Nobuhiro Iwamatsu
2008-05-05 15:34 ` Larry Johnson [this message]
2008-05-05 18:41 ` [U-Boot-Users] [PATCH][RFC] pci: Remove CONFIG_PCI_SKIP_HOST_BRIDGE and Add check PCI class of host bridge Stefan Roese
2008-05-07 16:31 ` Anton Vorontsov
2008-05-09 2:01 ` Larry Johnson
2008-05-11 23:13 ` Wolfgang Denk
2008-05-12 13:43 ` Nobuhiro Iwamatsu
2008-05-12 18:32 ` Wolfgang Denk
2008-06-17 4:59 ` Nobuhiro Iwamatsu
2008-06-17 6:39 ` [U-Boot-Users] [PATCH][RFC] pci: Add check PCI bridge class (Re: [PATCH][RFC] pci: Remove CONFIG_PCI_SKIP_HOST_BRIDGE and Add check PCI class of host bridge) Nobuhiro Iwamatsu
2008-07-07 13:58 ` Stefan Roese
2008-07-08 6:51 ` Nobuhiro Iwamatsu
2008-07-08 9:27 ` Stefan Roese
2008-07-05 22:32 ` [U-Boot-Users] [PATCH][RFC] pci: Remove CONFIG_PCI_SKIP_HOST_BRIDGE and Add check PCI class of host bridge Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=481F28FC.3040103@acm.org \
--to=lrj@acm.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.