All of lore.kernel.org
 help / color / mirror / Atom feed
From: Riku Voipio <riku.voipio-WgUW+8SLYMv1KXRcyAk9cg@public.gmane.org>
To: Bryan Wu <cooloney-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org,
	Michael Hennerich
	<michael.hennerich-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org>
Subject: Re: [PATCH 2/2] [I2C] add PCA9543 chip driver
Date: Mon, 12 May 2008 15:30:43 +0300	[thread overview]
Message-ID: <48283873.5090709@movial.fi> (raw)
In-Reply-To: <1210586847-8955-3-git-send-email-cooloney-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

Bryan Wu wrote:
> From: Michael Hennerich 
> --- /dev/null
> +++ b/drivers/i2c/chips/pca9543.c
> @@ -0,0 +1,212 @@
> +/*
> +    pca9543.c - Part of lm_sensors, Linux kernel modules for hardware
> +             monitoring
>   
Not a sensor chip..
> +/* A few notes about the PCA9543:
> +
> +*   The PCA9543 is a bi-directional translating switch, controlled by the
> +    I2C bus. The SCL/SDA upstream pair fans out to two downstream
> +    pairs, or channels. Any individual SCx/SDx channels or combination
> +    of channels can be selected, determined by the contents of the
> +    programmable control register. Two interrupt inputs, INT0 to INT3,
> +    one for each of the downstream pairs, are provided. One interrupt
> +    output INT, which acts as an AND of the two interrupt inputs, is
> +    provided.
> +
> +*/
>   
You might want to add a url to the datasheet, rather than
a copypaste from it. Any description in the driver sould
> +
> +/* This is the driver that will be inserted */
> +static struct i2c_driver pca9543_driver = {
> +	.driver = {
> +		.name	= "pca9543",
> +	},
> +	.id		= I2C_DRIVERID_PCF8574,
> +	.attach_adapter	= pca9543_attach_adapter,
> +	.detach_client	= pca9543_detach_client,
> +};
>   
Since the chip is undetectable, and used on embedded platform, I think you
should consider a "new-style" driver with .probe/remove instead.
See i2c/writing-clients
> +	struct i2c_client *new_client;
>
> +	new_client = &data->client;
> +	i2c_set_clientdata(new_client, data);
> +	new_client->addr = address;
> +	new_client->adapter = adapter;
> +	new_client->driver = &pca9543_driver;
> +	new_client->flags = 0;
>
>   
s/new_client/client/ please.
> +	/* Now, we would do the remaining detection. But the PCF8574 is plainly
> +	   impossible to detect! Stupid chip. */
> +
>   
copypaste from PCF8574 driver? :) Again, consider if the new style drivers
would me more useful for your platform.



_______________________________________________
i2c mailing list
i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org
http://lists.lm-sensors.org/mailman/listinfo/i2c

  parent reply	other threads:[~2008-05-12 12:30 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-12 10:07 [PATCH 0/2] Two I2C Chips drivers from Blackfin team Bryan Wu
     [not found] ` <1210586847-8955-1-git-send-email-cooloney-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2008-05-12 10:07   ` [PATCH 1/2] [I2C]: add AD5252 chip driver Bryan Wu
2008-05-12 10:07   ` [PATCH 2/2] [I2C] add PCA9543 " Bryan Wu
     [not found]     ` <1210586847-8955-3-git-send-email-cooloney-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2008-05-12 12:30       ` Riku Voipio [this message]
     [not found]         ` <48283873.5090709-WgUW+8SLYMv1KXRcyAk9cg@public.gmane.org>
2008-05-13 11:54           ` Hennerich, Michael
     [not found]             ` <8A42379416420646B9BFAC9682273B6D015F5379-pcKY8lWzTjquVPpjEGsWsTcYPEmu4y7e@public.gmane.org>
2008-05-14  4:23               ` Bryan Wu
2008-05-12 11:34   ` [PATCH 0/2] Two I2C Chips drivers from Blackfin team Jean Delvare
     [not found]     ` <20080512133453.23bde88d-ig7AzVSIIG7kN2dkZ6Wm7A@public.gmane.org>
2008-05-12 12:07       ` Bryan Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48283873.5090709@movial.fi \
    --to=riku.voipio-wguw+8slymv1kxrcyak9cg@public.gmane.org \
    --cc=cooloney-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
    --cc=michael.hennerich-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.