From: Pavel Emelyanov <xemul@openvz.org>
To: Roland Dreier <rolandd@cisco.com>,
Sean Hefty <sean.hefty@intel.com>,
Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: John Gregor <john.gregor@qlogic.com>,
general@lists.openfabrics.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [PATCH][INFINIBAND]: Make ipath_portdata work with struct pid * not pid_t.
Date: Mon, 12 May 2008 18:43:58 +0400 [thread overview]
Message-ID: <482857AE.2030904@openvz.org> (raw)
The official reason is "with the presence of pid namespaces in the
kernel using pid_t-s inside one is no longer safe".
But the reason I fix exactly the infiniband right now is the following.
About a month ago (when the 2.6.25 was not yet released) there still
was a one last caller of a to-be-deprecated-soon function find_pid() -
the kill_proc() function, which in turn was only used by nfs callback
code.
During the last merge window, this last caller was finally eliminated
by some NFS patch(es) and I was about to finally kill this kill_proc()
and find_pid(), but found, that I was late and the kill_proc is now
called from the infiniband driver (commit 58411d1c).
So here's the patch, that turns this code to use struct pid * and (!)
the kill_pid routine. If it is possible to have this one in 2.6.26, I
would appreciate this A LOT and be able to close one more hole in pid
namespaces.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
---
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index ce7b7c3..258e66c 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -2616,7 +2616,7 @@ int ipath_reset_device(int unit)
ipath_dbg("unit %u port %d is in use "
"(PID %u cmd %s), can't reset\n",
unit, i,
- dd->ipath_pd[i]->port_pid,
+ pid_nr(dd->ipath_pd[i]->port_pid),
dd->ipath_pd[i]->port_comm);
ret = -EBUSY;
goto bail;
@@ -2654,19 +2654,21 @@ bail:
static int ipath_signal_procs(struct ipath_devdata *dd, int sig)
{
int i, sub, any = 0;
- pid_t pid;
+ struct pid *pid;
if (!dd->ipath_pd)
return 0;
for (i = 1; i < dd->ipath_cfgports; i++) {
- if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt ||
- !dd->ipath_pd[i]->port_pid)
+ if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt)
continue;
pid = dd->ipath_pd[i]->port_pid;
+ if (!pid)
+ continue;
+
dev_info(&dd->pcidev->dev, "context %d in use "
"(PID %u), sending signal %d\n",
- i, pid, sig);
- kill_proc(pid, sig, 1);
+ i, pid_nr(pid), sig);
+ kill_pid(pid, sig, 1);
any++;
for (sub = 0; sub < INFINIPATH_MAX_SUBPORT; sub++) {
pid = dd->ipath_pd[i]->port_subpid[sub];
@@ -2674,8 +2676,8 @@ static int ipath_signal_procs(struct ipath_devdata *dd, int sig)
continue;
dev_info(&dd->pcidev->dev, "sub-context "
"%d:%d in use (PID %u), sending "
- "signal %d\n", i, sub, pid, sig);
- kill_proc(pid, sig, 1);
+ "signal %d\n", i, sub, pid_nr(pid), sig);
+ kill_pid(pid, sig, 1);
any++;
}
}
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 3295177..b472b15 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -555,7 +555,7 @@ static int ipath_tid_free(struct ipath_portdata *pd, unsigned subport,
p = dd->ipath_pageshadow[porttid + tid];
dd->ipath_pageshadow[porttid + tid] = NULL;
ipath_cdbg(VERBOSE, "PID %u freeing TID %u\n",
- pd->port_pid, tid);
+ pid_nr(pd->port_pid), tid);
dd->ipath_f_put_tid(dd, &tidbase[tid],
RCVHQ_RCV_TYPE_EXPECTED,
dd->ipath_tidinvalid);
@@ -1609,7 +1609,7 @@ static int try_alloc_port(struct ipath_devdata *dd, int port,
port);
pd->port_cnt = 1;
port_fp(fp) = pd;
- pd->port_pid = current->pid;
+ pd->port_pid = get_pid(task_pid(current));
strncpy(pd->port_comm, current->comm, sizeof(pd->port_comm));
ipath_stats.sps_ports++;
ret = 0;
@@ -1793,14 +1793,15 @@ static int find_shared_port(struct file *fp,
}
port_fp(fp) = pd;
subport_fp(fp) = pd->port_cnt++;
- pd->port_subpid[subport_fp(fp)] = current->pid;
+ pd->port_subpid[subport_fp(fp)] =
+ get_pid(task_pid(current));
tidcursor_fp(fp) = 0;
pd->active_slaves |= 1 << subport_fp(fp);
ipath_cdbg(PROC,
"%s[%u] %u sharing %s[%u] unit:port %u:%u\n",
current->comm, current->pid,
subport_fp(fp),
- pd->port_comm, pd->port_pid,
+ pd->port_comm, pid_nr(pd->port_pid),
dd->ipath_unit, pd->port_port);
ret = 1;
goto done;
@@ -2066,7 +2067,8 @@ static int ipath_close(struct inode *in, struct file *fp)
* the slave(s) don't wait for receive data forever.
*/
pd->active_slaves &= ~(1 << fd->subport);
- pd->port_subpid[fd->subport] = 0;
+ put_pid(pd->port_subpid[fd->subport]);
+ pd->port_subpid[fd->subport] = NULL;
mutex_unlock(&ipath_mutex);
goto bail;
}
@@ -2074,7 +2076,7 @@ static int ipath_close(struct inode *in, struct file *fp)
if (pd->port_hdrqfull) {
ipath_cdbg(PROC, "%s[%u] had %u rcvhdrqfull errors "
- "during run\n", pd->port_comm, pd->port_pid,
+ "during run\n", pd->port_comm, pid_nr(pd->port_pid),
pd->port_hdrqfull);
pd->port_hdrqfull = 0;
}
@@ -2134,11 +2136,12 @@ static int ipath_close(struct inode *in, struct file *fp)
unlock_expected_tids(pd);
ipath_stats.sps_ports--;
ipath_cdbg(PROC, "%s[%u] closed port %u:%u\n",
- pd->port_comm, pd->port_pid,
+ pd->port_comm, pid_nr(pd->port_pid),
dd->ipath_unit, port);
}
- pd->port_pid = 0;
+ put_pid(pd->port_pid);
+ pd->port_pid = NULL;
dd->ipath_pd[pd->port_port] = NULL; /* before releasing mutex */
mutex_unlock(&ipath_mutex);
ipath_free_pddata(dd, pd); /* after releasing the mutex */
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 02b24a3..2097587 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -159,8 +159,8 @@ struct ipath_portdata {
/* saved total number of polled urgent packets for poll edge trigger */
u32 port_urgent_poll;
/* pid of process using this port */
- pid_t port_pid;
- pid_t port_subpid[INFINIPATH_MAX_SUBPORT];
+ struct pid *port_pid;
+ struct pid *port_subpid[INFINIPATH_MAX_SUBPORT];
/* same size as task_struct .comm[] */
char port_comm[16];
/* pkeys set by this use of this port */
next reply other threads:[~2008-05-12 14:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-12 14:43 Pavel Emelyanov [this message]
2008-05-12 15:41 ` [PATCH][INFINIBAND]: Make ipath_portdata work with struct pid * not pid_t Roland Dreier
2008-05-12 15:48 ` Dave Olson
2008-05-13 18:46 ` Roland Dreier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=482857AE.2030904@openvz.org \
--to=xemul@openvz.org \
--cc=general@lists.openfabrics.org \
--cc=hal.rosenstock@gmail.com \
--cc=john.gregor@qlogic.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rolandd@cisco.com \
--cc=sean.hefty@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.