Re: [patch 2/4] powerpc: add i2c pins to dts and board setup

[Scott Wood <scottwood@freescale.com>]

akpm@linux-foundation.org wrote:
> From: Jochen Friedrich <jochen@scram.de>
> 
> Initialize I2C pins on boards with CPM1/CPM2 controllers.
> 
> Signed-off-by: Jochen Friedrich <jochen@scram.de>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> ---
> 
>  arch/powerpc/boot/dts/mpc8272ads.dts         |   10 ++++++++++
>  arch/powerpc/boot/dts/mpc866ads.dts          |   10 ++++++++++
>  arch/powerpc/boot/dts/mpc885ads.dts          |   10 ++++++++++
>  arch/powerpc/platforms/82xx/mpc8272_ads.c    |    4 ++++
>  arch/powerpc/platforms/8xx/mpc86xads_setup.c |    4 ++++
>  arch/powerpc/platforms/8xx/mpc885ads_setup.c |    3 +++
>  6 files changed, 41 insertions(+)
> 
> diff -puN arch/powerpc/boot/dts/mpc8272ads.dts~powerpc-add-i2c-pins-to-dts-and-board-setup arch/powerpc/boot/dts/mpc8272ads.dts
> --- a/arch/powerpc/boot/dts/mpc8272ads.dts~powerpc-add-i2c-pins-to-dts-and-board-setup
> +++ a/arch/powerpc/boot/dts/mpc8272ads.dts
> @@ -217,6 +217,16 @@
>  				linux,network-index = <1>;
>  				fsl,cpm-command = <0x16200300>;
>  			};
> +
> +			i2c@11860 {
> +				compatible = "fsl,mpc8272-i2c",
> +					     "fsl,cpm2-i2c",
> +					     "fsl,cpm-i2c";
> +				reg = <11860 20 8afc 2>;
> +				interrupts = <1 8>;
> +				interrupt-parent = <&PIC>;
> +				fsl,cpm-command = <29600000>;
> +			};

As I pointed out earlier, this patch is sticking dts-v0 style constants 
into a dts-v1 file.  It will not work.

We also need to document CPM2 i2c as an exception to the normal 
interpretation of the second resource for a CPM device in 
booting-without-of.txt.

-Scott