From: "Kim B. Heino" <Kim.Heino@bluegiga.com>
To: rtc-linux@googlegroups.com, linux-kernel@vger.kernel.org,
a.zummo@towertech.it
Subject: [PATCH] add support for ST M41T94 SPI RTC (patch rev. 3)
Date: Mon, 19 May 2008 14:09:42 +0300 [thread overview]
Message-ID: <48315FF6.9070909@bluegiga.com> (raw)
This patch adds kernel driver for M41T94 RTC chip connected via SPI.
I've tested it on two different AT91-based hardwares.
This is third revision of the patch: some comments made by
Alessandro Zummo fixed.
Revision two added support for century bit and fixes.
Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
diff -urN orig/drivers/rtc/Kconfig linux-2.6.25/drivers/rtc/Kconfig
--- orig/drivers/rtc/Kconfig 2008-04-17 05:49:44.000000000 +0300
+++ linux-2.6.25/drivers/rtc/Kconfig 2008-05-19 11:29:59.000000000 +0300
@@ -266,6 +266,15 @@
if SPI_MASTER
+config RTC_DRV_M41T94
+ tristate "ST M41T94"
+ help
+ If you say yes here you will get support for the
+ ST M41T94 SPI RTC chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-m41t94.
+
config RTC_DRV_MAX6902
tristate "Maxim MAX6902"
help
diff -urN orig/drivers/rtc/Makefile linux-2.6.25/drivers/rtc/Makefile
--- orig/drivers/rtc/Makefile 2008-04-17 05:49:44.000000000 +0300
+++ linux-2.6.25/drivers/rtc/Makefile 2008-05-19 11:29:59.000000000 +0300
@@ -33,6 +33,7 @@
obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o
obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o
+obj-$(CONFIG_RTC_DRV_M41T94) += rtc-m41t94.o
obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
diff -urN orig/drivers/rtc/rtc-m41t94.c linux-2.6.25/drivers/rtc/rtc-m41t94.c
--- orig/drivers/rtc/rtc-m41t94.c 1970-01-01 02:00:00.000000000 +0200
+++ linux-2.6.25/drivers/rtc/rtc-m41t94.c 2008-05-19 11:33:32.000000000 +0300
@@ -0,0 +1,173 @@
+/*
+ * Driver for ST M41T94 SPI RTC
+ *
+ * Copyright (C) 2008 Kim B. Heino
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/spi/spi.h>
+#include <linux/bcd.h>
+
+#define M41T94_REG_SECONDS 0x01
+#define M41T94_REG_MINUTES 0x02
+#define M41T94_REG_HOURS 0x03
+#define M41T94_REG_WDAY 0x04
+#define M41T94_REG_DAY 0x05
+#define M41T94_REG_MONTH 0x06
+#define M41T94_REG_YEAR 0x07
+#define M41T94_REG_HT 0x0c
+
+#define M41T94_BIT_HALT 0x40
+#define M41T94_BIT_STOP 0x80
+#define M41T94_BIT_CB 0x40
+#define M41T94_BIT_CEB 0x80
+
+static int m41t94_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ u8 buf[8]; /* write cmd + 7 registers */
+
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "write", tm->tm_sec, tm->tm_min,
+ tm->tm_hour, tm->tm_mday,
+ tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ buf[0] = 0x80 | M41T94_REG_SECONDS; /* write time + date */
+ buf[M41T94_REG_SECONDS] = BIN2BCD(tm->tm_sec);
+ buf[M41T94_REG_MINUTES] = BIN2BCD(tm->tm_min);
+ buf[M41T94_REG_HOURS] = BIN2BCD(tm->tm_hour);
+ buf[M41T94_REG_WDAY] = BIN2BCD(tm->tm_wday + 1);
+ buf[M41T94_REG_DAY] = BIN2BCD(tm->tm_mday);
+ buf[M41T94_REG_MONTH] = BIN2BCD(tm->tm_mon + 1);
+
+ buf[M41T94_REG_HOURS] |= M41T94_BIT_CEB;
+ if (tm->tm_year >= 100)
+ buf[M41T94_REG_HOURS] |= M41T94_BIT_CB;
+ buf[M41T94_REG_YEAR] = BIN2BCD(tm->tm_year % 100);
+
+ return spi_write(spi, buf, 8);
+}
+
+static int m41t94_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ u8 buf[2];
+ int ret, hour;
+
+ /* clear halt update bit */
+ ret = spi_w8r8(spi, M41T94_REG_HT);
+ if (ret < 0)
+ return ret;
+ if (ret & M41T94_BIT_HALT) {
+ buf[0] = 0x80 | M41T94_REG_HT;
+ buf[1] = ret & ~M41T94_BIT_HALT;
+ spi_write(spi, buf, 2);
+ }
+
+ /* clear stop bit */
+ ret = spi_w8r8(spi, M41T94_REG_SECONDS);
+ if (ret < 0)
+ return ret;
+ if (ret & M41T94_BIT_STOP) {
+ buf[0] = 0x80 | M41T94_REG_SECONDS;
+ buf[1] = ret & ~M41T94_BIT_STOP;
+ spi_write(spi, buf, 2);
+ }
+
+ tm->tm_sec = BCD2BIN(spi_w8r8(spi, M41T94_REG_SECONDS));
+ tm->tm_min = BCD2BIN(spi_w8r8(spi, M41T94_REG_MINUTES));
+ hour = spi_w8r8(spi, M41T94_REG_HOURS);
+ tm->tm_hour = BCD2BIN(hour & 0x3f);
+ tm->tm_wday = BCD2BIN(spi_w8r8(spi, M41T94_REG_WDAY)) - 1;
+ tm->tm_mday = BCD2BIN(spi_w8r8(spi, M41T94_REG_DAY));
+ tm->tm_mon = BCD2BIN(spi_w8r8(spi, M41T94_REG_MONTH)) - 1;
+ tm->tm_year = BCD2BIN(spi_w8r8(spi, M41T94_REG_YEAR));
+ if ((hour & M41T94_BIT_CB) || !(hour & M41T94_BIT_CEB))
+ tm->tm_year += 100;
+
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "read", tm->tm_sec, tm->tm_min,
+ tm->tm_hour, tm->tm_mday,
+ tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ /* initial clock setting can be undefined */
+ return rtc_valid_tm(tm);
+}
+
+static const struct rtc_class_ops m41t94_rtc_ops = {
+ .read_time = m41t94_read_time,
+ .set_time = m41t94_set_time,
+};
+
+static struct spi_driver m41t94_driver;
+
+static int __devinit m41t94_probe(struct spi_device *spi)
+{
+ struct rtc_device *rtc;
+ int res;
+
+ spi->bits_per_word = 8;
+ spi_setup(spi);
+
+ res = spi_w8r8(spi, M41T94_REG_SECONDS);
+ if (res < 0) {
+ dev_err(&spi->dev, "not found.\n");
+ return res;
+ }
+
+ rtc = rtc_device_register(m41t94_driver.driver.name,
+ &spi->dev, &m41t94_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc))
+ return PTR_ERR(rtc);
+
+ dev_set_drvdata(&spi->dev, rtc);
+
+ return 0;
+}
+
+static int __devexit m41t94_remove(struct spi_device *spi)
+{
+ struct rtc_device *rtc = platform_get_drvdata(spi);
+
+ if (rtc)
+ rtc_device_unregister(rtc);
+
+ return 0;
+}
+
+static struct spi_driver m41t94_driver = {
+ .driver = {
+ .name = "rtc-m41t94",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = m41t94_probe,
+ .remove = __devexit_p(m41t94_remove),
+};
+
+static __init int m41t94_init(void)
+{
+ return spi_register_driver(&m41t94_driver);
+}
+
+module_init(m41t94_init);
+
+static __exit void m41t94_exit(void)
+{
+ spi_unregister_driver(&m41t94_driver);
+}
+
+module_exit(m41t94_exit);
+
+MODULE_AUTHOR("Kim B. Heino <Kim.Heino@bluegiga.com>");
+MODULE_DESCRIPTION("Driver for ST M41T94 SPI RTC");
+MODULE_LICENSE("GPL");
next reply other threads:[~2008-05-19 11:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-19 11:09 Kim B. Heino [this message]
2008-10-01 12:51 ` [PATCH] add support for ST M41T94 SPI RTC (patch rev. 3) Bosko Radivojevic
2008-10-02 17:33 ` Kim B. Heino
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48315FF6.9070909@bluegiga.com \
--to=kim.heino@bluegiga.com \
--cc=a.zummo@towertech.it \
--cc=linux-kernel@vger.kernel.org \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.