From: Ruediger Dohmhardt <ruediger.dohmhardt@freenet.de>
To: Manu Abraham <abraham.manu@gmail.com>
Cc: "linux-dvb: linuxtv.org" <linux-dvb@linuxtv.org>
Subject: Re: [linux-dvb] CAM of Mantis 2033 still not working
Date: Fri, 23 May 2008 23:26:53 +0200 [thread overview]
Message-ID: <4837369D.2020901@freenet.de> (raw)
In-Reply-To: <48371567.8080304@gmail.com>
Hi Manu,
the changeset 7344 3ae5e8d85a55 crashes after doing "modprobe mantis"
and the computer hangs.
I could still log in from remote, doing an "init 6", but the machine did
not reboot anymore. So I had to push the "Reset".
Below is /var/log/messges
May 23 23:10:51 linux-sh8m kernel: ACPI: PCI Interrupt 0000:02:01.0[A]
-> GSI 21 (level, low) -> IRQ 21
May 23 23:10:51 linux-sh8m kernel: irq: 21, latency: 64
May 23 23:10:51 linux-sh8m kernel: memory: 0xdfeff000, mmio:
0xffffc200006f6000
May 23 23:10:51 linux-sh8m kernel: found a VP-2033 PCI DVB-C device on
(02:01.0),
May 23 23:10:51 linux-sh8m kernel: Mantis Rev 1 [1822:0008], irq:
21, latency: 64
May 23 23:10:51 linux-sh8m kernel: memory: 0xdfeff000, mmio:
0xffffc200006f6000
May 23 23:10:51 linux-sh8m kernel: MAC Address=[00:08:ca:19:e9:b6]
May 23 23:10:51 linux-sh8m kernel: mantis_alloc_buffers (0):
DMA=0x69b90000 cpu=0xffff810069b90000 size=65536
May 23 23:10:51 linux-sh8m kernel: mantis_alloc_buffers (0):
RISC=0x5afe0000 cpu=0xffff81005afe0000 size=1000
May 23 23:10:51 linux-sh8m kernel: DVB: registering new adapter (Mantis
dvb adapter)
May 23 23:10:52 linux-sh8m kernel: mantis_frontend_init (0): Probing for
CU1216 (DVB-C)
May 23 23:10:52 linux-sh8m kernel: TDA10021: i2c-addr = 0x0c, id = 0x7c
May 23 23:10:52 linux-sh8m kernel: mantis_frontend_init (0): found
Philips CU1216 DVB-C frontend (TDA10021) @ 0x0c
May 23 23:10:52 linux-sh8m kernel: mantis_frontend_init (0): Mantis
DVB-C Philips CU1216 frontend attach success
May 23 23:10:52 linux-sh8m kernel: DVB: registering frontend 0 (Philips
TDA10021 DVB-C)...
May 23 23:10:52 linux-sh8m kernel: mantis_ca_init (0): Registering
EN50221 device
May 23 23:10:52 linux-sh8m kernel: mantis_ca_init (0): Registered
EN50221 device
May 23 23:10:52 linux-sh8m kernel: Unable to handle kernel NULL pointer
dereference at 0000000000000000 RIP:
May 23 23:10:52 linux-sh8m kernel: [<ffffffff80223de6>]
__wake_up_common+0x26/0x70
May 23 23:10:52 linux-sh8m kernel: PGD 5c0b4067 PUD 5c1e6067 PMD 0
May 23 23:10:52 linux-sh8m kernel: Oops: 0000 [1] PREEMPT
May 23 23:10:52 linux-sh8m kernel: CPU 0
May 23 23:10:52 linux-sh8m kernel: Modules linked in: mantis ip6t_LOG
nf_conntrack_ipv6 xt_pkttype ipt_LOG xt_limit
kqemu(P) af_packet cpufreq_conservative cpufreq_ondemand
cpufreq_performance cpufreq_powersave thermal fan evdev b
utton battery ac isofs nls_iso8859_1 nls_cp437 vfat fat nls_utf8 ntfs
loop md_mod dm_mod ip6t_REJECT xt_tcpudp ipt_
REJECT xt_state iptable_mangle iptable_nat nf_nat iptable_filter
ip6table_mangle nf_conntrack_ipv4 nf_conntrack nfn
etlink ip_tables ip6table_filter ip6_tables x_tables ipv6 vboxdrv rtc
w83627hf hwmon_vid powernow_k8 freq_table pro
cessor lirc_mceusb2(F) usbhid lirc_dev lnbp21 mb86a16 nvidia(P) stb6100
snd_ice1724 tda10021 snd_ice17xx_ak4xxx ide
_cd snd_ac97_codec ac97_bus cdrom snd_ak4114 ohci1394 tda10023 stb0899
snd_pcm snd_timer snd_page_alloc snd_pt2258
snd_i2c snd_ak4xxx_adda snd_mpu401_uart snd_rawmidi snd_seq_device
ieee1394 8139too snd soundcore stv0299 dvb_core
k8temp ehci_hcd ohci_hcd i2c_piix4 usbcore lp bttv ir_common
compat_ioctl32 videodev v4l1_compat i2c_algo_bit v
May 23 23:10:52 linux-sh8m kernel: 4l2_common videobuf_dma_sg
videobuf_core btcx_risc tveeprom i2c_core sg
May 23 23:10:52 linux-sh8m kernel: Pid: 4, comm: events/0 Tainted:
PF 2.6.22.19 #6
May 23 23:10:52 linux-sh8m kernel: RIP: 0010:[<ffffffff80223de6>]
[<ffffffff80223de6>] __wake_up_common+0x26/0x70
May 23 23:10:52 linux-sh8m kernel: RSP: 0000:ffff810037c8be50 EFLAGS:
00010017
May 23 23:10:52 linux-sh8m kernel: RAX: 0000000000000000 RBX:
0000000000000286 RCX: 0000000000000000
May 23 23:10:52 linux-sh8m kernel: RDX: 0000000000000001 RSI:
0000000000000003 RDI: ffff810073af07d8
May 23 23:10:52 linux-sh8m kernel: RBP: ffff810037c8be80 R08:
0000000000000000 R09: 00000000ffffffff
May 23 23:10:52 linux-sh8m kernel: R10: 0000000000000000 R11:
0000000000000000 R12: ffff810037ff7fc0
May 23 23:10:52 linux-sh8m kernel: R13: ffff810073af07d8 R14:
0000000000000001 R15: 0000000000000000
May 23 23:10:52 linux-sh8m kernel: FS: 00002ada904de6f0(0000)
GS:ffffffff80604000(0000) knlGS:0000000000000000
May 23 23:10:52 linux-sh8m kernel: CS: 0010 DS: 0018 ES: 0018 CR0:
000000008005003b
May 23 23:10:52 linux-sh8m kernel: CR2: 0000000000000000 CR3:
0000000059e78000 CR4: 00000000000006e0
May 23 23:10:52 linux-sh8m kernel: Process events/0 (pid: 4, threadinfo
ffff810037c8a000, task ffff810037c80040)
May 23 23:10:52 linux-sh8m kernel: Stack: 0000000300000000
0000000000000286 ffff810037ff7fc0 ffffffff88db46e0
May 23 23:10:52 linux-sh8m kernel: 0000000000000000 0000000000000000
ffff810037c8bea0 ffffffff80225865
May 23 23:10:52 linux-sh8m kernel: ffff810073af07b0 ffff810073af07b8
ffff810073af07b0 ffffffff8023aff7
May 23 23:10:52 linux-sh8m kernel: Call Trace:
May 23 23:10:52 linux-sh8m kernel: [<ffffffff88db46e0>]
:mantis:mantis_hifevm_work+0x0/0x300
May 23 23:10:52 linux-sh8m kernel: [<ffffffff80225865>] __wake_up+0x25/0x60
May 23 23:10:52 linux-sh8m kernel: [<ffffffff8023aff7>]
run_workqueue+0xb7/0x1a0
May 23 23:10:52 linux-sh8m kernel: [<ffffffff8023b6f0>]
worker_thread+0x0/0x130
May 23 23:10:52 linux-sh8m kernel: [<ffffffff8023b6f0>]
worker_thread+0x0/0x130
May 23 23:10:52 linux-sh8m kernel: [<ffffffff8023b7b3>]
worker_thread+0xc3/0x130
May 23 23:10:52 linux-sh8m kernel: [<ffffffff8023f150>]
autoremove_wake_function+0x0/0x30
May 23 23:10:52 linux-sh8m kernel: [<ffffffff8023b6f0>]
worker_thread+0x0/0x130
May 23 23:10:52 linux-sh8m kernel: [<ffffffff8023eceb>] kthread+0x4b/0x80
May 23 23:10:52 linux-sh8m kernel: [<ffffffff8020a3c8>] child_rip+0xa/0x12
May 23 23:10:52 linux-sh8m kernel: [<ffffffff8023eca0>] kthread+0x0/0x80
May 23 23:10:52 linux-sh8m kernel: [<ffffffff8020a3be>] child_rip+0x0/0x12
May 23 23:10:52 linux-sh8m kernel:
May 23 23:10:52 linux-sh8m kernel:
May 23 23:10:52 linux-sh8m kernel: Code: 48 8b 18 75 08 eb 34 0f 1f 00
48 89 d3 48 8d 78 e8 44 8b 60
May 23 23:10:52 linux-sh8m kernel: RIP [<ffffffff80223de6>]
__wake_up_common+0x26/0x70
May 23 23:10:52 linux-sh8m kernel: RSP <ffff810037c8be50>
May 23 23:10:52 linux-sh8m kernel: CR2: 0000000000000000
May 23 23:10:52 linux-sh8m kernel: note: events/0[4] exited with
preempt_count 1
May 23 23:10:52 linux-sh8m kernel: mantis_hif_init (0): Adapter(0)
Initializing Mantis Host Interface
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-05-23 21:27 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-17 10:31 [linux-dvb] Mantis 2033 still not working with CAM inserted Ruediger Dohmhardt
2008-05-17 21:10 ` Manu Abraham
2008-05-20 7:17 ` [linux-dvb] CAM of Mantis 2033 still not working Ruediger Dohmhardt
2008-05-23 19:05 ` Manu Abraham
2008-05-23 19:28 ` Joakim Berglund
2008-05-28 19:06 ` Ruediger Dohmhardt
2008-05-28 19:18 ` Bas v.d. Wiel
2008-05-30 20:10 ` Manu Abraham
2008-05-31 8:59 ` Bas v.d. Wiel
2008-05-23 21:26 ` Ruediger Dohmhardt [this message]
2008-06-16 19:38 ` Ruediger Dohmhardt
-- strict thread matches above, loose matches on Subject: below --
2008-06-22 8:48 Yves Gölz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4837369D.2020901@freenet.de \
--to=ruediger.dohmhardt@freenet.de \
--cc=abraham.manu@gmail.com \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.