From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ric Wheeler Subject: btrfs panic - BUG: soft lockup - CPU#0 stuck for 61s! [fs_mark:4573] Date: Mon, 02 Jun 2008 13:52:47 -0400 Message-ID: <4844336F.1010807@redhat.com> Reply-To: rwheeler@redhat.com Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------050200060703030300050807" To: linux-btrfs@vger.kernel.org Return-path: List-ID: This is a multi-part message in MIME format. --------------050200060703030300050807 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit I can reliably get btrfs to panic by running my fs_mark code on a newly created file system with lots of threads on an 8-way box. If this is too aggressive, let me know ;-) Here is a summary of the panic: EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. device fsid 814e6131acbfcbec-7a2a40df880929bb devid 1 transid 495 /dev/sdb1 BUG: soft lockup - CPU#1 stuck for 61s! [fs_mark:4572] CPU 1: Modules linked in: btrfs libcrc32c ipt_MASQUERADE iptable_nat nf_nat bridge bnep rfcomm l2cap bluetooth ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi fuse sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_multipath dm_mod kvm_intel kvm snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss iTCO_wdt snd_mixer_oss iTCO_vendor_support nvidia(P) pata_acpi button ata_piix snd_pcm ppdev firewire_ohci i2c_i801 ata_generic firewire_core pcspkr dcdbas snd_timer sr_mod cdrom snd_page_alloc snd_hwdep snd tg3 serio_raw i2c_core shpchp crc_itu_t sg parport_pc soundcore parport floppy ahci libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table] Pid: 4572, comm: fs_mark Tainted: P 2.6.25.3-18.fc9.x86_64 #1 RIP: 0010:[] [] __write_lock_failed+0x9/0x20 RSP: 0018:ffff81000c529e60 EFLAGS: 00000206 RAX: ffff810015c0e000 RBX: ffff81000c529e68 RCX: 0000000000000016 RDX: ffff81003d019e00 RSI: 0000000000000001 RDI: ffff8100100e24f0 RBP: ffff8100189bef00 R08: 0000000000000000 R09: 0000000000000016 R10: 0000000012750e57 R11: 0000000000000246 R12: 0000000000000202 R13: ffff81000c529de8 R14: 00000000000011dc R15: ffff81000c529f58 FS: 000000000159b850(0063) GS:ffff81003f802680(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f55301940a8 CR3: 000000000c513000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: [] ? _write_lock+0x12/0x14 [] ? :btrfs:btrfs_del_ordered_inode+0xc0/0x13f [] ? :btrfs:btrfs_release_file+0x9/0xd [] ? __fput+0xca/0x189 [] ? fput+0x14/0x16 [] ? filp_close+0x66/0x71 [] ? sys_close+0x99/0xd2 [] ? tracesys+0xd5/0xda ric --------------050200060703030300050807 Content-Type: text/plain; name="btrfs_panic.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="btrfs_panic.txt" Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.25.3-18.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Tue May 13 04:54:47 EDT 2008 Command line: ro root=UUID=1b44ce19-eab7-43ce-ba66-510fd2e3ef5b rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fe0ac00 (usable) BIOS-e820: 000000003fe0ac00 - 000000003fe5cc00 (ACPI NVS) BIOS-e820: 000000003fe5cc00 - 000000003fe5ec00 (ACPI data) BIOS-e820: 000000003fe5ec00 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fe000000 - 00000000ff000000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 158) 0 entries of 3200 used Entering add_active_range(0, 256, 261642) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.5 present. ACPI: RSDP 000FEBF0, 0024 (r2 DELL ) ACPI: XSDT 000FCD54, 0074 (r1 DELL B9K 15 ASL 61) ACPI: FACP 000FCE84, 00F4 (r3 DELL B9K 15 ASL 61) ACPI: DSDT FFF62D72, 3A12 (r1 DELL dt_ex 1000 INTL 20050624) ACPI: FACS 3FE0AC00, 0040 ACPI: SSDT FFF668A5, 00AC (r1 DELL st_ex 1000 INTL 20050624) ACPI: APIC 000FCF78, 00AA (r1 DELL B9K 15 ASL 61) ACPI: BOOT 000FD022, 0028 (r1 DELL B9K 15 ASL 61) ACPI: ASF! 000FD04A, 0096 (r32 DELL B9K 15 ASL 61) ACPI: MCFG 000FD0E0, 003E (r1 DELL B9K 15 ASL 61) ACPI: HPET 000FD11E, 0038 (r1 DELL B9K 15 ASL 61) ACPI: TCPA 000FD37A, 0032 (r1 DELL B9K 15 ASL 61) ACPI: ____ 000FD3AC, 0030 (r1 DELL B9K 15 ASL 61) ACPI: SLIC 000FD156, 00C0 (r1 DELL B9K 15 ASL 61) No NUMA configuration found Faking a node at 0000000000000000-000000003fe0a000 Entering add_active_range(0, 0, 158) 0 entries of 3200 used Entering add_active_range(0, 256, 261642) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000003fe0a000 NODE_DATA [000000000000b000 - 0000000000012fff] bootmap [0000000000013000 - 000000000001afc7] pages 8 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-75db3b] TEXT DATA BSS early res: 3 [37d19000-37fef182] RAMDISK early res: 4 [9ec00-a0bff] EBDA early res: 5 [8000-afff] PGTABLE [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 158 0: 256 -> 261642 On node 0 totalpages: 261544 DMA zone: 56 pages used for memmap DMA zone: 1383 pages reserved DMA zone: 2559 pages, LIFO batch:0 DMA32 zone: 3521 pages used for memmap DMA32 zone: 254025 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) Processor #4 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) Processor #5 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) Processor #3 ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) Processor #7 ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec88000] gsi_base[24]) IOAPIC[1]: apic_id 9, address 0xfec88000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfec89000] gsi_base[48]) IOAPIC[2]: apic_id 10, address 0xfec89000, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009e000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) SMP: Allowing 8 CPUs, 0 hotplug CPUs PERCPU: Allocating 45232 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 256584 Policy zone: DMA32 Kernel command line: ro root=UUID=1b44ce19-eab7-43ce-ba66-510fd2e3ef5b rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PM_TIMER time.c: Detected 1994.998 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 1022808k/1046568k available (2657k kernel code, 23368k reserved, 1395k data, 356k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 3992.49 BogoMIPS (lpj=1996246) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 20781220 Detected 20.781 MHz APIC timer. Booting processor 1/8 APIC 0x4 Initializing CPU#1 Calibrating delay using timer specific routine.. 3990.03 BogoMIPS (lpj=1995018) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 1/4 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2/8 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 3990.03 BogoMIPS (lpj=1995015) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3/8 APIC 0x5 Initializing CPU#3 Calibrating delay using timer specific routine.. 3990.03 BogoMIPS (lpj=1995016) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 3/5 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU3: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Booting processor 4/8 APIC 0x2 Initializing CPU#4 Calibrating delay using timer specific routine.. 4069.81 BogoMIPS (lpj=2034905) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 4/2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU4: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#4]: passed. Booting processor 5/8 APIC 0x6 Initializing CPU#5 Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=1995023) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 5/6 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 2 CPU5: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#5]: passed. Booting processor 6/8 APIC 0x3 Initializing CPU#6 Calibrating delay using timer specific routine.. 3990.02 BogoMIPS (lpj=1995013) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 6/3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU6: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#6]: passed. Booting processor 7/8 APIC 0x7 Initializing CPU#7 Calibrating delay using timer specific routine.. 3990.03 BogoMIPS (lpj=1995018) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU 7/7 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 3 CPU7: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU E5405 @ 2.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#7]: passed. Brought up 8 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=224 bytes sizeof(task_struct)=6272 bytes CPU0 attaching sched-domain: domain 0: span 00000000,00000005 groups: 00000000,00000001 00000000,00000004 domain 1: span 00000000,000000ff groups: 00000000,00000005 00000000,0000000a 00000000,00000050 00000000,000000a0 domain 2: span 00000000,000000ff groups: 00000000,000000ff CPU1 attaching sched-domain: domain 0: span 00000000,0000000a groups: 00000000,00000002 00000000,00000008 domain 1: span 00000000,000000ff groups: 00000000,0000000a 00000000,00000050 00000000,000000a0 00000000,00000005 domain 2: span 00000000,000000ff groups: 00000000,000000ff CPU2 attaching sched-domain: domain 0: span 00000000,00000005 groups: 00000000,00000004 00000000,00000001 domain 1: span 00000000,000000ff groups: 00000000,00000005 00000000,0000000a 00000000,00000050 00000000,000000a0 domain 2: span 00000000,000000ff groups: 00000000,000000ff CPU3 attaching sched-domain: domain 0: span 00000000,0000000a groups: 00000000,00000008 00000000,00000002 domain 1: span 00000000,000000ff groups: 00000000,0000000a 00000000,00000050 00000000,000000a0 00000000,00000005 domain 2: span 00000000,000000ff groups: 00000000,000000ff CPU4 attaching sched-domain: domain 0: span 00000000,00000050 groups: 00000000,00000010 00000000,00000040 domain 1: span 00000000,000000ff groups: 00000000,00000050 00000000,000000a0 00000000,00000005 00000000,0000000a domain 2: span 00000000,000000ff groups: 00000000,000000ff CPU5 attaching sched-domain: domain 0: span 00000000,000000a0 groups: 00000000,00000020 00000000,00000080 domain 1: span 00000000,000000ff groups: 00000000,000000a0 00000000,00000005 00000000,0000000a 00000000,00000050 domain 2: span 00000000,000000ff groups: 00000000,000000ff CPU6 attaching sched-domain: domain 0: span 00000000,00000050 groups: 00000000,00000040 00000000,00000010 domain 1: span 00000000,000000ff groups: 00000000,00000050 00000000,000000a0 00000000,00000005 00000000,0000000a domain 2: span 00000000,000000ff groups: 00000000,000000ff CPU7 attaching sched-domain: domain 0: span 00000000,000000a0 groups: 00000000,00000080 00000000,00000020 domain 1: span 00000000,000000ff groups: 00000000,000000a0 00000000,00000005 00000000,0000000a 00000000,00000050 domain 2: span 00000000,000000ff groups: 00000000,000000ff net_namespace: 1016 bytes Time: 16:35:03 Date: 06/02/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: DMI System Vendor: Dell Inc. ACPI: DMI Product Name: Precision WorkStation T5400 ACPI: DMI Product Version: ACPI: DMI Board Name: 0RW203 ACPI: DMI BIOS Vendor: Dell Inc. ACPI: DMI BIOS Date: 03/22/2008 ACPI: Please send DMI info above to linux-acpi@vger.kernel.org ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.PCI4.PCI5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.PCI4.PCI6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3.PCI7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 87 [20070126] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMAR:parse DMAR table failure. PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 4 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 5 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 6 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 7 system 00:01: ioport range 0x800-0x85f has been reserved system 00:01: ioport range 0xc00-0xc7f has been reserved system 00:01: ioport range 0x860-0x8ff has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: 0xfbe00000-0xfbefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: d000-dfff MEM window: 0xf8000000-0xfbdfffff PREFETCH window: 0x00000000d0000000-0x00000000dfffffff PCI: Bridge: 0000:04:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:04:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:03:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:03:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:09.0 IO window: disabled. MEM window: 0xf7f00000-0xf7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: 0xf7e00000-0xf7efffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: 0xf7d00000-0xf7dfffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 48 (level, low) -> IRQ 48 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 52 (level, low) -> IRQ 52 PCI: Setting latency timer of device 0000:00:05.0 to 64 ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 56 (level, low) -> IRQ 56 PCI: Setting latency timer of device 0000:00:09.0 to 64 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 56 (level, low) -> IRQ 56 PCI: Setting latency timer of device 0000:03:00.0 to 64 ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 56 (level, low) -> IRQ 56 PCI: Setting latency timer of device 0000:04:00.0 to 64 ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 56 (level, low) -> IRQ 56 PCI: Setting latency timer of device 0000:04:01.0 to 64 PCI: Setting latency timer of device 0000:03:00.3 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2904k freed Simple Boot Flag at 0x7a set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1212424504.621:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:02:00.0: Boot video device PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] Allocate Port Service[0000:00:01.0:pcie01] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] PCI: Setting latency timer of device 0000:00:09.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:09.0:pcie00] Allocate Port Service[0000:00:09.0:pcie01] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:03:00.0 to 64 Allocate Port Service[0000:03:00.0:pcie11] PCI: Setting latency timer of device 0000:04:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:04:00.0:pcie21] PCI: Setting latency timer of device 0000:04:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:04:01.0:pcie21] AER service couldn't init device 0000:00:01.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:09.0:pcie01 - no _OSC support pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: ACPI0007:02 is registered as cooling_device2 ACPI: ACPI0007:03 is registered as cooling_device3 ACPI: ACPI0007:04 is registered as cooling_device4 ACPI: ACPI0007:05 is registered as cooling_device5 ACPI: ACPI0007:06 is registered as cooling_device6 ACPI: ACPI0007:07 is registered as cooling_device7 hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 registered taskstats version 1 Magic number: 12:873:589 Freeing unused kernel memory: 356k freed Write protecting the kernel read-only data: 1120k ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xff980800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 1-0:1.0: unable to enumerate USB device on port 1 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 1-0:1.0: unable to enumerate USB device on port 2 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.25.3-18.fc9.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20 usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1 input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1 usb 2-1: New USB device found, idVendor=413c, idProduct=2003 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: Dell USB Keyboard usb 2-1: Manufacturer: Dell usb 2-2: new low speed USB device using uhci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2 input,hidraw1: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1d.0-2 usb 2-2: New USB device found, idVendor=413c, idProduct=3012 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: Dell USB Optical Mouse usb 2-2: Manufacturer: Dell ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x1f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970100 irq 20 ata2: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970180 irq 20 ata3: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970200 irq 20 ata4: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970280 irq 20 ata5: SATA max UDMA/133 abar m1024@0xff970000 port 0xff970300 irq 20 ata6: DUMMY ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: ST380815AS, 4.ADA, max UDMA/133 ata1.00: 156250000 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-8: ST31000340AS, SD15, max UDMA/133 ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATAPI: PBDS CD-RW/DVD-ROM DH-48C2S, ND11, max UDMA/100 ata3.00: configured for UDMA/100 ata4: SATA link down (SStatus 0 SControl 300) ata5: SATA link down (SStatus 4 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST380815AS 4.AD PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156250000 512-byte hardware sectors (80000 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: Direct-Access ATA ST31000340AS SD15 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk scsi 2:0:0:0: CD-ROM PBDS CDRWDVD DH-48C2S ND11 PQ: 0 ANSI: 5 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1212424513.930:2): selinux=0 auid=4294967295 ses=4294967295 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 scsi 2:0:0:0: Attached scsi generic sg2 type 5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 tg3.c:v3.91 (April 18, 2008) ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:08:00.0 to 64 eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1e:4f:c7:ed:c3 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) input: PC Speaker as /devices/platform/pcspkr/input/input3 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 ACPI: PCI Interrupt 0000:09:02.0[A] -> GSI 18 (level, low) -> IRQ 18 intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. ppdev: user-space parallel port driver firewire_ohci: Added fw-ohci device 0000:09:02.0, OHCI version 1.0 ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi6 : ata_piix scsi7 : ata_piix ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata7: port disabled. ignoring. ata8: port disabled. ignoring. input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 firewire_core: created device fw0: GUID 0000d1008026a5d0, S400 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5 nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 52 (level, low) -> IRQ 52 PCI: Setting latency timer of device 0000:02:00.0 to 64 iTCO_vendor_support: vendor-support=0 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.08 Wed Apr 2 07:55:48 PST 2008 ACPI: Power Button (CM) [VBTN] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401 ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x1 ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Internal Mic Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Docking Mic Playback VolumeBeep Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Surround Playback Switch, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Center Playback Switch, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave LFE Playback Switch, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Side Playback Switch, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda6, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 8385888k swap on /dev/sda5. Priority:-1 extents:1 across:8385888k IA-32 Microcode Update Driver: v1.14a NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (8192 buckets, 32768 max) ip_tables: (C) 2000-2006 Netfilter Core Team RPC: Registered udp transport module. RPC: Registered tcp transport module. fuse init (API version 7.9) Loading iSCSI transport class v2.0-869. iscsi: registered transport (tcp) iscsi: registered transport (iser) Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. virbr0: starting userspace STP failed, starting kernel STP ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready virbr0: no IPv6 routers present eth0: no IPv6 routers present mtrr: base(0xd0000000) is not aligned on a size(0xff00000) boundary kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. device fsid 814e6131acbfcbec-7a2a40df880929bb devid 1 transid 495 /dev/sdb1 BUG: soft lockup - CPU#1 stuck for 61s! [fs_mark:4572] CPU 1: Modules linked in: btrfs libcrc32c ipt_MASQUERADE iptable_nat nf_nat bridge bnep rfcomm l2cap bluetooth ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi fuse sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_multipath dm_mod kvm_intel kvm snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss iTCO_wdt snd_mixer_oss iTCO_vendor_support nvidia(P) pata_acpi button ata_piix snd_pcm ppdev firewire_ohci i2c_i801 ata_generic firewire_core pcspkr dcdbas snd_timer sr_mod cdrom snd_page_alloc snd_hwdep snd tg3 serio_raw i2c_core shpchp crc_itu_t sg parport_pc soundcore parport floppy ahci libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table] Pid: 4572, comm: fs_mark Tainted: P 2.6.25.3-18.fc9.x86_64 #1 RIP: 0010:[] [] __write_lock_failed+0x9/0x20 RSP: 0018:ffff81000c529e60 EFLAGS: 00000206 RAX: ffff810015c0e000 RBX: ffff81000c529e68 RCX: 0000000000000016 RDX: ffff81003d019e00 RSI: 0000000000000001 RDI: ffff8100100e24f0 RBP: ffff8100189bef00 R08: 0000000000000000 R09: 0000000000000016 R10: 0000000012750e57 R11: 0000000000000246 R12: 0000000000000202 R13: ffff81000c529de8 R14: 00000000000011dc R15: ffff81000c529f58 FS: 000000000159b850(0063) GS:ffff81003f802680(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f55301940a8 CR3: 000000000c513000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: [] ? _write_lock+0x12/0x14 [] ? :btrfs:btrfs_del_ordered_inode+0xc0/0x13f [] ? :btrfs:btrfs_release_file+0x9/0xd [] ? __fput+0xca/0x189 [] ? fput+0x14/0x16 [] ? filp_close+0x66/0x71 [] ? sys_close+0x99/0xd2 [] ? tracesys+0xd5/0xda BUG: soft lockup - CPU#0 stuck for 61s! [fs_mark:4573] CPU 0: Modules linked in: btrfs libcrc32c ipt_MASQUERADE iptable_nat nf_nat bridge bnep rfcomm l2cap bluetooth ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi fuse sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_multipath dm_mod kvm_intel kvm snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss iTCO_wdt snd_mixer_oss iTCO_vendor_support nvidia(P) pata_acpi button ata_piix snd_pcm ppdev firewire_ohci i2c_i801 ata_generic firewire_core pcspkr dcdbas snd_timer sr_mod cdrom snd_page_alloc snd_hwdep snd tg3 serio_raw i2c_core shpchp crc_itu_t sg parport_pc soundcore parport floppy ahci libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table] Pid: 4573, comm: fs_mark Tainted: P 2.6.25.3-18.fc9.x86_64 #1 RIP: 0010:[] [] _spin_lock+0x14/0x1a RSP: 0018:ffff81000c52de68 EFLAGS: 00000297 RAX: 0000000000001f1e RBX: ffff81000c52de68 RCX: 0000000000000016 RDX: ffff81003cd78680 RSI: 0000000000000001 RDI: ffff810015c0f8bc RBP: ffff8100341d8f00 R08: 0000000000000000 R09: 0000000000000016 R10: 0000000012750e57 R11: 0000000000000246 R12: 0000000000000202 R13: ffff81000c52dde8 R14: 00000000000011dd R15: ffff81000c52df58 FS: 000000000159b850(0063) GS:ffffffff813f6000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f593cae5000 CR3: 000000000c51f000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: [] ? mapping_tagged+0xd/0xf [] ? :btrfs:btrfs_del_ordered_inode+0x8d/0x13f [] ? :btrfs:btrfs_release_file+0x9/0xd [] ? __fput+0xca/0x189 [] ? fput+0x14/0x16 [] ? filp_close+0x66/0x71 [] ? sys_close+0x99/0xd2 [] ? tracesys+0xd5/0xda BUG: soft lockup - CPU#3 stuck for 61s! [fs_mark:4569] CPU 3: Modules linked in: btrfs libcrc32c ipt_MASQUERADE iptable_nat nf_nat bridge bnep rfcomm l2cap bluetooth ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi fuse sunrpc ipt_REJECT nf_conntrack_ipv4 iptable_filter ip_tables ip6t_REJECT xt_tcpudp nf_conntrack_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_multipath dm_mod kvm_intel kvm snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss iTCO_wdt snd_mixer_oss iTCO_vendor_support nvidia(P) pata_acpi button ata_piix snd_pcm ppdev firewire_ohci i2c_i801 ata_generic firewire_core pcspkr dcdbas snd_timer sr_mod cdrom snd_page_alloc snd_hwdep snd tg3 serio_raw i2c_core shpchp crc_itu_t sg parport_pc soundcore parport floppy ahci libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: freq_table] Pid: 4569, comm: fs_mark Tainted: P 2.6.25.3-18.fc9.x86_64 #1 RIP: 0010:[] [] __write_lock_failed+0x9/0x20 RSP: 0018:ffff81000c4fdcb0 EFLAGS: 00000206 RAX: 00000000fffffff4 RBX: ffff81000c4fdcb8 RCX: ffffffff88c282b2 RDX: 0000000000000004 RSI: 0000000000000050 RDI: ffff8100100e24f0 RBP: ffff81000c4fdc58 R08: 0000000000000021 R09: ffffffff88c1c504 R10: ffff81000c4fdcb8 R11: 00000000fffffffa R12: ffffffff88c1c58d R13: ffff81000c4fdc48 R14: 0000000000000086 R15: ffff8100160ce420 FS: 000000000159b850(0063) GS:ffff81003f802c80(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f55301940a8 CR3: 000000000c4e5000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: [] ? _write_lock+0x12/0x14 [] ? :btrfs:btrfs_add_ordered_inode+0xcb/0x18f [] ? :btrfs:dirty_and_release_pages+0x21d/0x312 [] ? find_or_create_page+0x51/0x79 [] ? :btrfs:btrfs_file_write+0x67a/0x8c4 [] ? vfs_write+0xae/0x157 [] ? sys_write+0x47/0x6f [] ? tracesys+0xd5/0xda --------------050200060703030300050807--