From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <484556FE.70700@domain.hid>
Date: Tue, 03 Jun 2008 16:36:46 +0200
From: Paradoxxa <paradoxxa2001@domain.hid>
MIME-Version: 1.0
References: <4845166E.3000203@domain.hid>
	<2ff1a98a0806030507l6d84126et55f85d4bf1f5614b@domain.hid>
In-Reply-To: <2ff1a98a0806030507l6d84126et55f85d4bf1f5614b@domain.hid>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Sender: paradoxxa2001@domain.hid
Subject: Re: [Xenomai-help] xeno-test on AT91SAM9263 irqloop and switchtest
 problem?
List-Id: Help regarding installation and common use of Xenomai
	<xenomai.xenomai.org>
List-Unsubscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
List-Archive: </public/xenomai-help>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-help-request@domain.hid>
List-Subscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
To: xenomai@xenomai.org

Gilles Chanteperdrix schrieb:
> On Tue, Jun 3, 2008 at 12:01 PM, Paradoxxa <paradoxxa2001@domain.hid> wrote:
>   
>> Hi all,
>>
>> I have here a AT91SAM9263 with a 2.6.24 kernel, Xenomai 2.4.3 and Adeos
>> Patch 1.9-01 and run the xeno-test. It seems there are a Problem with the
>> irqloop and the switchtest applications.
>> In the attachment you can find the log files.
>>     
>
> To run the latency test with -t 1 or -t 2, you need to enable the
> "timerbench" driver in the kernel configuration menu.
> In the same bench, the switchtest test needs the "switchtest" driver.
>
> I do not see any error message about irqloop in the logs you sent us.
>
>
>   
Ok, i found it in the kernel configuration menu. I started the irqloop 
manual. But if a parallel port is required 
it doesn't matters.
What do you think about the latency times? In the worst case i got times 
around 185 us.

Thomas