From: Scott Wood <scottwood@freescale.com>
To: matvejchikov@gmail.com
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: The 2.6.25 kernel dosen't run on pq2fads based board
Date: Wed, 04 Jun 2008 13:41:32 -0500 [thread overview]
Message-ID: <4846E1DC.9010104@freescale.com> (raw)
In-Reply-To: <8496f91a0806040525u7e137221sc4bea5466cde3161@mail.gmail.com>
Matvejchikov Ilya wrote:
> Hi all!
>
> There is a problem with 2.6.25.4 kernel on the pq2fads based board.
Works for me using cuImage.
> ## Booting kernel from Legacy Image at 00200000 ...
> Image Name: Linux-2.6.25.4
> Image Type: PowerPC Linux Kernel Image (gzip compressed)
> Data Size: 1534783 Bytes = 1.5 MB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> Uncompressing Kernel Image ... OK
> ## Flattened Device Tree blob at 00800000
> Booting using the fdt blob at 0x800000
> Loading Device Tree to 007fe000, end 007fffff ... OK
I don't see FDT support for this board in current u-boot (I should
really get around to fixing that...), so I assume you're using a
modified u-boot?
> Xid mach(): done
> MMU:enter
> MMU:hw init
> MMU:mapin
> MMU:setio
> MMU:exit
> <<---- the reset was here :(
Perhaps your u-boot isn't properly filling in the memory node.
Oh, and just in case -- if you're using binutils 2.17, it's buggy.
-Scott
next prev parent reply other threads:[~2008-06-04 18:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-04 12:25 The 2.6.25 kernel dosen't run on pq2fads based board Matvejchikov Ilya
2008-06-04 18:41 ` Scott Wood [this message]
2008-06-05 19:04 ` Matvejchikov Ilya
2008-06-07 11:04 ` Detlev Zundel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4846E1DC.9010104@freescale.com \
--to=scottwood@freescale.com \
--cc=linuxppc-embedded@ozlabs.org \
--cc=matvejchikov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.