From: Marco Stornelli <marco.stornelli@coritel.it>
To: Misbah khan <misbah_khan@engineer.com>
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: Concern regarding Booting up of linux board ...
Date: Thu, 05 Jun 2008 14:32:24 +0200 [thread overview]
Message-ID: <4847DCD8.2040102@coritel.it> (raw)
In-Reply-To: <17668657.post@talk.nabble.com>
Misbah khan ha scritto:
>
>
> Misbah khan wrote:
>> Hi all ..
>>
>> we are using IMX-31 (ARM Core) processor with Linux 2.6 and redboot as
>> boot loader with jffs2 for NAND flash and facing the concerned problem :-
>>
>> The board is booting fine but it sometimes takes 21 sec to boot and
>> sometimes takes 31 sec to boot which is a concern for us actually it takes
>> usually 21 sec and 31 sec sometimes
>>
>> If we remove the power after booting and again insert the power supply It
>> gives the following warning message related to jffs2 ....
>>
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x011dec00: read 0x2464ba56, calculated 0x474915f8.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x0112be00: read 0x149efa32, calculated 0x8f32b0eb.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x0112ba00: read 0xdcfafeb2, calculated 0xb86eb888.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x013e8600: read 0x20bed1fc, calculated 0xe9509808.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x013e9200: read 0x6e4f40bd, calculated 0x28248aa4.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x013e8e00: read 0x6e4f40bd, calculated 0x59eaeede.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x011df000: read 0x6e4f40bd, calculated 0xbf916037.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x011dde00: read 0x6e4f40bd, calculated 0x946d0599.
>> JFFS2 notice: (878) check_node_data: wrong data CRC in data node at
>> 0x011dc800: read 0x6e4f40bd, calculated 0x1e890eaa.
>> JFFS2 notice: (759) check_node_data: wrong data CRC in data node at
>> 0x008c0200: read 0xd3ad877b, calculated 0xf4f0b5f9.
>> JFFS2 notice: (759) check_node_data: wrong data CRC in data node at
>> 0x0097b800: read 0x8d0623a1, calculated 0xefce6ce7.
>> JFFS2 notice: (759) check_node_data: wrong data CRC in data node at
>> 0x00965200: read 0x8d0623a1, calculated 0x92a2a227.
>>
>> Having never experienced this before i do believe that this could be the
>> jffs2 related concern hence just thinking of using YAFFS to increase the
>> booting effeciency ...
>>
>>
>> I would remain thankful if any of you could share your experience or
>> thaught regarding this ...
>>
>> Thank you
>> Misbah <><
>>
>
>
> Thank you for your reply ....
>
> This is not related to ARM processor specific rather its a generic problem
> related to booting of Board Hence need for your help ...
>
> Misbah <><
>
Ok but for this mailing list a generic problem related to booting of a
board is off-topic. You can certainly find a mailing list about JFFS2.
--
Marco Stornelli
Embedded Software Engineer
CoRiTeL - Consorzio di Ricerca sulle Telecomunicazioni
http://www.coritel.it
marco.stornelli@coritel.it
+39 06 72582838
prev parent reply other threads:[~2008-06-05 12:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-05 8:49 Concern regarding Booting up of linux board Misbah khan
2008-06-05 12:04 ` Josh Boyer
2008-06-05 12:26 ` Misbah khan
2008-06-05 12:32 ` Marco Stornelli [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4847DCD8.2040102@coritel.it \
--to=marco.stornelli@coritel.it \
--cc=linuxppc-embedded@ozlabs.org \
--cc=misbah_khan@engineer.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.