From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <48494DA6.5040502@gmx.de> Date: Fri, 06 Jun 2008 16:45:58 +0200 From: Lars Uebernickel MIME-Version: 1.0 References: <2F7D63A21DB2C74EB8EB8C09AF667DB0152D3998@eitc220.eitc.epson.com> <48236D19.9090209@gmx.de> In-Reply-To: <48236D19.9090209@gmx.de> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Subject: Re: [Printing-architecture] Coding the Common Printing Dialog an dits interface - PPD and Foomatic extensions List-Id: Printing architecture under linux List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: printing-architecture@lists.linux-foundation.org Lars Uebernickel wrote: > Glen, > > Great idea - this way, we will have a better overview than browsing > through endless threads here on the list. > > I have started a requirements page on the OpenPrinting wiki with the > examples you've given: > > http://www.linux-foundation.org/en/OpenPrinting/Requirements > I have just changed the format of the Requirements page. Each requirement has its own section now (there was too little room in the table). I also suggest to put notes and remarks directly to the corresponding requirement (with the colon syntax known from wikipedia talk pages). I have also added some requirements that I came up with while I started to specify the API. I will add some more later tonight (CEST). It would be nice if lots of people could look at them from time to time (esp. the 'Pending' ones) and tell me what they think. Also, feel free to add more requirements. I want to finish the API as soon as possible to start implementing it in some applications. After that, it will be very hard to change fundamental stuff. Thanks, Lars