From: Tejun Heo <htejun@gmail.com>
To: Jeff Garzik <jeff@garzik.org>,
IDE/ATA development list <linux-ide@vger.kernel.org>
Cc: "Hemmann, Volker Armin" <volker.armin.hemmann@tu-clausthal.de>,
Peer Chen <pchen@nvidia.com>
Subject: [PATCH #upstream-fixes] ahci: workarounds for mcp65
Date: Tue, 10 Jun 2008 00:13:04 +0900 [thread overview]
Message-ID: <484D4880.2050103@gmail.com> (raw)
MCP65 ahci can do NCQ but doesn't set the CAP bit and rev A0 and A1
can't do MSI but have MSI capability. Implement AHCI_HFLAG_YES_NCQ
and apply appropriate workarounds.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Peer Chen <pchen@nvidia.com>
---
drivers/ata/ahci.c | 40 +++++++++++++++++++++++++++++++---------
1 file changed, 31 insertions(+), 9 deletions(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 544b7d6..1c62b8e 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -89,6 +89,7 @@ enum {
board_ahci_sb600 = 3,
board_ahci_mv = 4,
board_ahci_sb700 = 5,
+ board_ahci_mcp65 = 6,
/* global controller registers */
HOST_CAP = 0x00, /* host capabilities */
@@ -190,6 +191,7 @@ enum {
AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
+ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
/* ap->flags bits */
@@ -384,6 +386,14 @@ static const struct ata_port_info ahci_port_info[] = {
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
+ /* board_ahci_mcp65 */
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
};
static const struct pci_device_id ahci_pci_tbl[] = {
@@ -438,14 +448,14 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
/* NVIDIA */
- { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */
@@ -624,6 +634,12 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
cap &= ~HOST_CAP_NCQ;
}
+ if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "controller can do NCQ, turning on CAP_NCQ\n");
+ cap |= HOST_CAP_NCQ;
+ }
+
if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
dev_printk(KERN_INFO, &pdev->dev,
"controller can't do PMP, turning off CAP_PMP\n");
@@ -2118,7 +2134,8 @@ static void ahci_p5wdh_workaround(struct ata_host *host)
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- struct ata_port_info pi = ahci_port_info[ent->driver_data];
+ unsigned int board_id = ent->driver_data;
+ struct ata_port_info pi = ahci_port_info[board_id];
const struct ata_port_info *ppi[] = { &pi, NULL };
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
@@ -2167,6 +2184,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
return -ENOMEM;
hpriv->flags |= (unsigned long)pi.private_data;
+ /* MCP65 revision A1 and A2 can't do MSI */
+ if (board_id == board_ahci_mcp65 &&
+ (pdev->revision == 0xa1 || pdev->revision == 0xa2))
+ hpriv->flags |= AHCI_HFLAG_NO_MSI;
+
if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
pci_intx(pdev, 1);
next reply other threads:[~2008-06-09 15:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-09 15:13 Tejun Heo [this message]
2008-06-11 21:27 ` [PATCH #upstream-fixes] ahci: workarounds for mcp65 Hemmann, Volker Armin
2008-06-13 6:43 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=484D4880.2050103@gmail.com \
--to=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
--cc=pchen@nvidia.com \
--cc=volker.armin.hemmann@tu-clausthal.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.