From: Eric Miao <eric.y.miao@gmail.com>
To: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: ymiao3@marvell.com, linux-fbdev-devel@lists.sourceforge.net,
linux-arm-kernel@lists.arm.linux.org.uk
Subject: Re: [RFC 2.6.26-rc3 04/10] pxafb: add exit and remove handlers
Date: Fri, 13 Jun 2008 09:24:50 +0800 [thread overview]
Message-ID: <4851CC62.8000008@gmail.com> (raw)
In-Reply-To: <1213289961-1562-5-git-send-email-jayakumar.lkml@gmail.com>
Jaya Kumar wrote:
> This patch adds exit and remove handlers to pxafb so that it can be loaded
> and unloaded as a module.
>
> Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Acked-by: Eric Miao <eric.miao@marvell.com>
> ---
> drivers/video/pxafb.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 44 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
> index b891aac..89f1b48 100644
> --- a/drivers/video/pxafb.c
> +++ b/drivers/video/pxafb.c
> @@ -1790,11 +1790,49 @@ failed:
> return ret;
> }
>
> +static int __devexit pxafb_remove(struct platform_device *dev)
> +{
> + struct pxafb_info *fbi = platform_get_drvdata(dev);
> + struct resource *r;
> + int irq;
> + struct fb_info *info;
> +
> + if (!fbi)
> + return 0;
> +
> + info = &fbi->fb;
> +
> + unregister_framebuffer(info);
> +
> + pxafb_disable_controller(fbi);
> +
> + if (fbi->fb.cmap.len)
> + fb_dealloc_cmap(&fbi->fb.cmap);
> +
> + irq = platform_get_irq(dev, 0);
> + free_irq(irq, fbi);
> +
> + dma_free_writecombine(&dev->dev, fbi->map_size,
> + fbi->map_cpu, fbi->map_dma);
> +
> + iounmap(fbi->mmio_base);
> +
> + r = platform_get_resource(dev, IORESOURCE_MEM, 0);
> + release_mem_region(r->start, r->end - r->start + 1);
> +
> + clk_put(fbi->clk);
> + kfree(fbi);
> +
> + return 0;
> +}
> +
> static struct platform_driver pxafb_driver = {
> .probe = pxafb_probe,
> + .remove = pxafb_remove,
> .suspend = pxafb_suspend,
> .resume = pxafb_resume,
> .driver = {
> + .owner = THIS_MODULE,
> .name = "pxa2xx-fb",
> },
> };
> @@ -1807,7 +1845,13 @@ static int __init pxafb_init(void)
> return platform_driver_register(&pxafb_driver);
> }
>
> +static void __exit pxafb_exit(void)
> +{
> + platform_driver_unregister(&pxafb_driver);
> +}
> +
> module_init(pxafb_init);
> +module_exit(pxafb_exit);
>
> MODULE_DESCRIPTION("loadable framebuffer driver for PXA");
> MODULE_LICENSE("GPL");
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
next prev parent reply other threads:[~2008-06-13 1:24 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-12 16:59 [RFC 2.6.26-rc3 0/10] am200epd, pxafb, metronomefb changes v4 Jaya Kumar
2008-06-12 16:59 ` [RFC 2.6.26-rc3 01/10] pxafb: fix ifdef for command line option handling Jaya Kumar
[not found] ` <20080612203541.0baa5586.krzysztof.h1@poczta.fm>
2008-06-13 1:22 ` Eric Miao
2008-06-13 7:37 ` Russell King - ARM Linux
2008-06-12 16:59 ` [RFC 2.6.26-rc3 02/10] pxafb: cleanup and fix order of failure handling Jaya Kumar
2008-06-12 18:36 ` Krzysztof Helt
2008-06-13 1:23 ` Eric Miao
2008-06-13 7:37 ` Russell King - ARM Linux
2008-06-12 16:59 ` [RFC 2.6.26-rc3 03/10] pxafb: fix __devinit/exit annotations Jaya Kumar
2008-06-12 18:36 ` [Linux-fbdev-devel] " Krzysztof Helt
2008-06-13 1:24 ` Eric Miao
2008-06-13 7:38 ` Russell King - ARM Linux
2008-06-12 16:59 ` [RFC 2.6.26-rc3 04/10] pxafb: add exit and remove handlers Jaya Kumar
2008-06-12 18:37 ` [Linux-fbdev-devel] " Krzysztof Helt
2008-06-13 1:24 ` Eric Miao [this message]
2008-06-13 7:39 ` Russell King - ARM Linux
2008-06-12 16:59 ` [RFC 2.6.26-rc3 05/10] pxafb: add shared framebuffer interface Jaya Kumar
2008-06-15 6:26 ` [Linux-fbdev-devel] " Krzysztof Helt
2008-06-15 6:49 ` Jaya Kumar
2008-06-12 16:59 ` [RFC 2.6.26-rc3 06/10] gumstix: conversion to MFP support and add bluetooth support Jaya Kumar
2008-06-13 2:01 ` Eric Miao
2008-06-15 5:51 ` Jaya Kumar
2008-06-16 2:21 ` Eric Miao
2008-07-04 5:01 ` Jaya Kumar
2008-07-08 0:52 ` Jaya Kumar
2008-06-13 7:42 ` Russell King - ARM Linux
2008-06-15 5:54 ` Jaya Kumar
2008-07-31 9:04 ` Andrew Morton
2008-06-12 16:59 ` [RFC 2.6.26-rc3 07/10] am200epd: move am200epd to mach-pxa Jaya Kumar
2008-06-13 2:12 ` Eric Miao
2008-06-15 6:23 ` Jaya Kumar
2008-06-16 2:29 ` Eric Miao
2008-06-12 16:59 ` [RFC 2.6.26-rc3 08/10] am200epd: convert to shared fb and use gpio api Jaya Kumar
2008-06-13 2:20 ` Eric Miao
2008-06-15 6:42 ` Jaya Kumar
2008-06-16 2:35 ` Eric Miao
2008-07-08 12:43 ` Jaya Kumar
2008-06-12 16:59 ` [RFC 2.6.26-rc3 09/10] metronomefb: convert printk to dev_dbg/err messages Jaya Kumar
2008-06-13 2:22 ` Eric Miao
2008-06-12 16:59 ` [RFC 2.6.26-rc3 10/10] metronomefb: changes to use separate framebuffer Jaya Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4851CC62.8000008@gmail.com \
--to=eric.y.miao@gmail.com \
--cc=jayakumar.lkml@gmail.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=ymiao3@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.