All of lore.kernel.org
 help / color / mirror / Atom feed
From: "P. van Gaans" <w3ird_n3rd@gmx.net>
To: linux-dvb <linux-dvb@linuxtv.org>
Subject: [linux-dvb] Technisat Airstar USB round two
Date: Fri, 13 Jun 2008 20:57:02 +0200	[thread overview]
Message-ID: <4852C2FE.6040107@gmx.net> (raw)

Approximately a year ago I tried to make this USB DVB-T box work. But it 
wouldn't. With a little more knowledge today I tried again with v4l-dvb 
from hg, but it still won't go. I get this when I plug it in:

[ 3083.152125] usb 1-2: new full speed USB device using ohci_hcd and 
address 4
[ 3083.253055] usb 1-2: configuration #1 chosen from 1 choice
[ 3083.258204] flexcop_usb: running at FULL speed.
[ 3083.501399] DVB: registering new adapter (FlexCop Digital TV device)
[ 3083.502758] b2c2-flexcop: MAC address = 00:d0:d7:09:e7:70
[ 3083.516842] CX24123: wrong demod revision: 0
[ 3083.612219] b2c2-flexcop: found 'Zarlink MT352 DVB-T' .
[ 3083.612226] DVB: registering frontend 1 (Zarlink MT352 DVB-T)...
[ 3083.612261] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 DVB-T' 
at the 'USB' bus controlled by a 'FlexCopIII' complete
[ 3083.621757] flexcop_usb: Technisat/B2C2 FlexCop II/IIb/III Digital TV 
USB Driver successfully initialized and connected.

Note the "CX24123: wrong demod revision: 0". What's with that? It looks 
like something is wrong.

I get this when I unplug it:

[ 3081.464885] flexcop_usb: iso frame descriptor 0 has an error: -62
[ 3081.464887]
[ 3081.464892] flexcop_usb: iso frame descriptor 1 has an error: -62
[ 3081.464893]
[ 3081.464895] flexcop_usb: iso frame descriptor 2 has an error: -62
[ 3081.464896]
[ 3081.464897] flexcop_usb: iso frame descriptor 3 has an error: -62
[ 3081.464898]
[ 3081.468884] flexcop_usb: iso frame descriptor 0 has an error: -62
[ 3081.468886]
[ 3081.468891] flexcop_usb: iso frame descriptor 1 has an error: -62
[ 3081.468892]
[ 3081.468894] flexcop_usb: iso frame descriptor 2 has an error: -62
[ 3081.468895]
[ 3081.468896] flexcop_usb: iso frame descriptor 3 has an error: -62
[ 3081.468897]
[ 3081.472876] flexcop_usb: iso frame descriptor 0 has an error: -62
[ 3081.472877]
[ 3081.472879] flexcop_usb: iso frame descriptor 1 has an error: -62
[ 3081.472880]
[ 3081.472881] flexcop_usb: iso frame descriptor 2 has an error: -62
[ 3081.472882]
[ 3081.472883] flexcop_usb: iso frame descriptor 3 has an error: -62
[ 3081.472885]
[ 3081.475209] usb 1-2: USB disconnect, address 3
[ 3081.479869] flexcop_usb: iso frame descriptor 0 has an error: -62
[ 3081.479871]
[ 3081.479873] flexcop_usb: iso frame descriptor 1 has an error: -62
[ 3081.479874]
[ 3081.479875] flexcop_usb: iso frame descriptor 2 has an error: -62
[ 3081.479876]
[ 3081.479877] flexcop_usb: iso frame descriptor 3 has an error: -18
[ 3081.479878]
[ 3081.479880] flexcop_usb: iso frame descriptor 0 has an error: -18
[ 3081.479881]
[ 3081.479883] flexcop_usb: iso frame descriptor 1 has an error: -18
[ 3081.479884]
[ 3081.479885] flexcop_usb: iso frame descriptor 2 has an error: -18
[ 3081.479886]
[ 3081.479887] flexcop_usb: iso frame descriptor 3 has an error: -18
[ 3081.479888]
[ 3081.479890] flexcop_usb: iso frame descriptor 0 has an error: -18
[ 3081.479891]
[ 3081.479892] flexcop_usb: iso frame descriptor 1 has an error: -18
[ 3081.479893]
[ 3081.479895] flexcop_usb: iso frame descriptor 2 has an error: -18
[ 3081.479896]
[ 3081.479897] flexcop_usb: iso frame descriptor 3 has an error: -18
[ 3081.479898]
[ 3081.479900] flexcop_usb: iso frame descriptor 0 has an error: -18
[ 3081.479901]
[ 3081.479902] flexcop_usb: iso frame descriptor 1 has an error: -18
[ 3081.479903]
[ 3081.479904] flexcop_usb: iso frame descriptor 2 has an error: -18
[ 3081.479905]
[ 3081.479906] flexcop_usb: iso frame descriptor 3 has an error: -18
[ 3081.479907]
[ 3081.480307] flexcop_usb: Technisat/B2C2 FlexCop II/IIb/III Digital TV 
USB Driver successfully deinitialized and disconnected.

I think it doesn't like being unplugged. The problem is still the same: 
I see the device in /dev/dvb and in Kaffeine, when I try to watch a 
channel I see the ACT LED on the device blink a bit, but the LOCK LED 
will never light up and I never get to watch anything. Using Ubuntu 8.04.

P.

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

             reply	other threads:[~2008-06-13 18:57 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-13 18:57 P. van Gaans [this message]
2008-06-16  1:53 ` [linux-dvb] Technisat Airstar USB round two P. van Gaans
2008-06-16  7:54   ` Patrick Boettcher
2008-06-16 18:07     ` P. van Gaans

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4852C2FE.6040107@gmx.net \
    --to=w3ird_n3rd@gmx.net \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.