All of lore.kernel.org
 help / color / mirror / Atom feed
From: Naohiro Ooiwa <nooiwa@miraclelinux.com>
To: netdev@vger.kernel.org, usagi-users@linux-ipv6.org
Cc: "YOSHIFUJI Hideaki / 吉藤英明" <yoshfuji@linux-ipv6.org>
Subject: ping6 is sent out from wrong interface
Date: Fri, 20 Jun 2008 10:42:53 +0900	[thread overview]
Message-ID: <485B0B1D.5000603@miraclelinux.com> (raw)

Hi all,

I configured the IPv6 global address for two interfaces,
and sent the ping with "-I <eth1 address>" to the "ff02::1".

    # ifconfig eth0 add 2001:2c0:418:1::2/64
    # ifconfig eth1 add 2001:2c0:418:2::2/64
    # ping6 -I2001:2c0:418:2::2 ff02::1

    # /usr/sbin/tcpdump -ieth1 icmp6 -v -e
    tcpdump: listening on eth1, link-type EN10MB (Ethernet), capture size 96 bytes
    0 packets captured
    0 packets received by filter
    0 packets dropped by kernel

The ping packets weren't sent from "eth1",
so I captured the packets on the "eth0" by tcpdump.

    # /usr/sbin/tcpdump -ieth0 icmp6 -v -e
    tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
    18:16:53.900751 00:19:d1:19:23:af (oui Unknown) > 33:33:00:00:00:01 (oui Unknown), ethertype IPv6 (0x86dd), length
118: (hlim 64, next-header: ICMPv6 (58), length: 64) 2001:2c0:418:2::2 > ff02::1: ICMP6, echo request, length 64, seq 190
    18:16:53.957145 00:1d:09:7a:91:19 (oui Unknown) > 33:33:00:00:00:02 (oui Unknown), ethertype IPv6 (0x86dd), length
70: (hlim 255, next-header: ICMPv6 (58), length: 16) fe80::21d:9ff:fe7a:9119 > ff02::2: [icmp6 sum ok] ICMP6, router
solicitation, length 16
              source link-address option (1), length 8 (1): 00:1d:09:7a:91:19
    ::::::

The ping packets were sent out from "eth0"(00:19:d1:19:23:af),
but IPv6 address was "eth1"(2001:2c0:418:2::2).
Why is interface "eth0".  Isn't it bug ?

The following is additional information.

    # ifconfig eth0
    eth0      Link encap:Ethernet  HWaddr 00:19:D1:19:23:AF
              inet addr:10.1.0.161  Bcast:10.1.255.255  Mask:255.255.0.0
              inet6 addr: 2001:2c0:418:1::1/64 Scope:Global
              inet6 addr: fe80::219:d1ff:fe19:23af/64 Scope:Link
              ::::::
    # ifconfig eth1
    eth1      Link encap:Ethernet  HWaddr 00:10:18:0E:0C:B4
              inet addr:172.16.255.200  Bcast:172.16.255.255  Mask:255.255.0.0
              inet6 addr: 2001:2c0:418:2::2/64 Scope:Global
              inet6 addr: fe80::210:18ff:fe0e:cb4/64 Scope:Link
              ::::::

    # route -A inet6
    Kernel IPv6 routing table
    Destination            Next Hop Flags Metric Ref    Use Iface
    2001:2c0:418:1::/64    *        U     256    0        0 eth0
    2001:2c0:418:2::/64    *        U     256    0        0 eth1
    fe80::/64              *        U     256    0        0 eth0
    fe80::/64              *        U     256    0        0 eth1
    ::::::
    2001:2c0:418:1::1/128  *        U     0      8        1 lo
    2001:2c0:418:2::2/128  *        U     0      5        1 lo
    ::::::
    ff00::/8               *        U     256    0        0 eth0
    ff00::/8               *        U     256    0        0 eth1
    #

The version used are following:

    # uname -r -m
    2.6.24.7-92.fc8 i686
    # ping6 -V
    ping6 utility, iputils-sss20070202


Regards,
Naohiro Ooiwa


             reply	other threads:[~2008-06-20  2:14 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-20  1:42 Naohiro Ooiwa [this message]
2008-06-24 20:04 ` ping6 is sent out from wrong interface YOSHIFUJI Hideaki / 吉藤英明
  -- strict thread matches above, loose matches on Subject: below --
2008-06-25  7:02 Naohiro Ooiwa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=485B0B1D.5000603@miraclelinux.com \
    --to=nooiwa@miraclelinux.com \
    --cc=netdev@vger.kernel.org \
    --cc=usagi-users@linux-ipv6.org \
    --cc=yoshfuji@linux-ipv6.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.