From: Jan Kiszka <jan.kiszka@siemens.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 7/15] Extend mem_write_* to mem_access_*
Date: Mon, 23 Jun 2008 16:27:32 +0200 [thread overview]
Message-ID: <485FB2D4.5050601@siemens.com> (raw)
In-Reply-To: <485FB18E.1090801@siemens.com>
For full read-watchpoint support, it is required to keep track of the
accessed vaddr as well as the accessing pc also for read operations.
This patch extends the use of mem_write_pc/vaddr to mem_access_pc/vaddr
therefore.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
cpu-defs.h | 8 ++++----
exec.c | 18 +++++++++---------
softmmu_template.h | 15 ++++++++++-----
3 files changed, 23 insertions(+), 18 deletions(-)
Index: b/cpu-defs.h
===================================================================
--- a/cpu-defs.h
+++ b/cpu-defs.h
@@ -148,10 +148,10 @@ typedef struct CPUWatchpoint {
/* in order to avoid passing too many arguments to the memory \
write helpers, we store some rarely used information in the CPU \
context) */ \
- unsigned long mem_write_pc; /* host pc at which the memory was \
- written */ \
- target_ulong mem_write_vaddr; /* target virtual addr at which the \
- memory was written */ \
+ unsigned long mem_access_pc; /* host pc at which the memory was \
+ accessed */ \
+ target_ulong mem_access_vaddr; /* target virtual addr at which the \
+ memory was accessed */ \
int halted; /* TRUE if the CPU is in suspend state */ \
/* The meaning of the MMU modes is defined in the target code. */ \
CPUTLBEntry tlb_table[NB_MMU_MODES][CPU_TLB_SIZE]; \
Index: b/exec.c
===================================================================
--- a/exec.c
+++ b/exec.c
@@ -794,9 +794,9 @@ void tb_invalidate_phys_page_range(targe
if (current_tb_not_found) {
current_tb_not_found = 0;
current_tb = NULL;
- if (env->mem_write_pc) {
+ if (env->mem_access_pc) {
/* now we have a real cpu fault */
- current_tb = tb_find_pc(env->mem_write_pc);
+ current_tb = tb_find_pc(env->mem_access_pc);
}
}
if (current_tb == tb &&
@@ -809,7 +809,7 @@ void tb_invalidate_phys_page_range(targe
current_tb_modified = 1;
cpu_restore_state(current_tb, env,
- env->mem_write_pc, NULL);
+ env->mem_access_pc, NULL);
}
#endif /* TARGET_HAS_PRECISE_SMC */
/* we need to do that to handle the case where a signal
@@ -833,7 +833,7 @@ void tb_invalidate_phys_page_range(targe
if (!p->first_tb) {
invalidate_page_bitmap(p);
if (is_cpu_write_access) {
- tlb_unprotect_code_phys(env, start, env->mem_write_vaddr);
+ tlb_unprotect_code_phys(env, start, env->mem_access_vaddr);
}
}
#endif
@@ -858,7 +858,7 @@ static inline void tb_invalidate_phys_pa
if (1) {
if (loglevel) {
fprintf(logfile, "modifying code at 0x%x size=%d EIP=%x PC=%08x\n",
- cpu_single_env->mem_write_vaddr, len,
+ cpu_single_env->mem_access_vaddr, len,
cpu_single_env->eip,
cpu_single_env->eip + (long)cpu_single_env->segs[R_CS].base);
}
@@ -2207,7 +2207,7 @@ static void notdirty_mem_writeb(void *op
/* we remove the notdirty callback only if the code has been
flushed */
if (dirty_flags == 0xff)
- tlb_set_dirty(cpu_single_env, cpu_single_env->mem_write_vaddr);
+ tlb_set_dirty(cpu_single_env, cpu_single_env->mem_access_vaddr);
}
static void notdirty_mem_writew(void *opaque, target_phys_addr_t ram_addr,
@@ -2232,7 +2232,7 @@ static void notdirty_mem_writew(void *op
/* we remove the notdirty callback only if the code has been
flushed */
if (dirty_flags == 0xff)
- tlb_set_dirty(cpu_single_env, cpu_single_env->mem_write_vaddr);
+ tlb_set_dirty(cpu_single_env, cpu_single_env->mem_access_vaddr);
}
static void notdirty_mem_writel(void *opaque, target_phys_addr_t ram_addr,
@@ -2257,7 +2257,7 @@ static void notdirty_mem_writel(void *op
/* we remove the notdirty callback only if the code has been
flushed */
if (dirty_flags == 0xff)
- tlb_set_dirty(cpu_single_env, cpu_single_env->mem_write_vaddr);
+ tlb_set_dirty(cpu_single_env, cpu_single_env->mem_access_vaddr);
}
static CPUReadMemoryFunc *error_mem_read[3] = {
@@ -2279,7 +2279,7 @@ static void check_watchpoint(int offset,
target_ulong vaddr;
CPUWatchpoint *wp;
- vaddr = (env->mem_write_vaddr & TARGET_PAGE_MASK) + offset;
+ vaddr = (env->mem_access_vaddr & TARGET_PAGE_MASK) + offset;
for (wp = env->watchpoints; wp != NULL; wp = wp->next) {
if (vaddr == wp->vaddr && (wp->flags & flags)) {
env->watchpoint_hit = wp;
Index: b/softmmu_template.h
===================================================================
--- a/softmmu_template.h
+++ b/softmmu_template.h
@@ -51,13 +51,16 @@ static DATA_TYPE glue(glue(slow_ld, SUFF
int mmu_idx,
void *retaddr);
static inline DATA_TYPE glue(io_read, SUFFIX)(target_phys_addr_t physaddr,
- target_ulong addr)
+ target_ulong addr,
+ void *retaddr)
{
DATA_TYPE res;
int index;
index = (physaddr >> IO_MEM_SHIFT) & (IO_MEM_NB_ENTRIES - 1);
physaddr = (physaddr & TARGET_PAGE_MASK) + addr;
+ env->mem_access_vaddr = addr;
+ env->mem_access_pc = (unsigned long)retaddr;
#if SHIFT <= 2
res = io_mem_read[index][SHIFT](io_mem_opaque[index], physaddr);
#else
@@ -96,7 +99,8 @@ DATA_TYPE REGPARM glue(glue(__ld, SUFFIX
if ((addr & (DATA_SIZE - 1)) != 0)
goto do_unaligned_access;
addend = env->iotlb[mmu_idx][index];
- res = glue(io_read, SUFFIX)(addend, addr);
+ retaddr = GETPC();
+ res = glue(io_read, SUFFIX)(addend, addr, retaddr);
} else if (((addr & ~TARGET_PAGE_MASK) + DATA_SIZE - 1) >= TARGET_PAGE_SIZE) {
/* slow unaligned access (it spans two pages or IO) */
do_unaligned_access:
@@ -149,7 +153,8 @@ static DATA_TYPE glue(glue(slow_ld, SUFF
if ((addr & (DATA_SIZE - 1)) != 0)
goto do_unaligned_access;
addend = env->iotlb[mmu_idx][index];
- res = glue(io_read, SUFFIX)(addend, addr);
+ retaddr = GETPC();
+ res = glue(io_read, SUFFIX)(addend, addr, retaddr);
} else if (((addr & ~TARGET_PAGE_MASK) + DATA_SIZE - 1) >= TARGET_PAGE_SIZE) {
do_unaligned_access:
/* slow unaligned access (it spans two pages) */
@@ -195,8 +200,8 @@ static inline void glue(io_write, SUFFIX
index = (physaddr >> IO_MEM_SHIFT) & (IO_MEM_NB_ENTRIES - 1);
physaddr = (physaddr & TARGET_PAGE_MASK) + addr;
- env->mem_write_vaddr = addr;
- env->mem_write_pc = (unsigned long)retaddr;
+ env->mem_access_vaddr = addr;
+ env->mem_access_pc = (unsigned long)retaddr;
#if SHIFT <= 2
io_mem_write[index][SHIFT](io_mem_opaque[index], physaddr, val);
#else
next prev parent reply other threads:[~2008-06-23 14:36 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-23 14:22 [Qemu-devel] [PATCH 0/15] Enhance debugging support Jan Kiszka
2008-06-23 14:23 ` [Qemu-devel] [PATCH 1/15] Convert remaining __builtin_expect to likely/unlikely Jan Kiszka
2008-06-23 14:24 ` [Qemu-devel] [PATCH 2/15] Introduce SSTEP_INTERNAL Jan Kiszka
2008-06-23 14:24 ` [Qemu-devel] [PATCH 3/15] Replace CF_SINGLE_INSN with SSTEP_INTERNAL - v2 Jan Kiszka
2008-06-23 14:25 ` [Qemu-devel] [PATCH 4/15] Remove unused TB cflags Jan Kiszka
2008-06-23 14:26 ` [Qemu-devel] [PATCH 5/15] Return appropriate watch message to gdb Jan Kiszka
2008-06-23 14:26 ` [Qemu-devel] [PATCH 6/15] Refactor and enhance break/watchpoint API - v5 Jan Kiszka
2008-06-23 14:27 ` Jan Kiszka [this message]
2008-06-23 14:28 ` [Qemu-devel] [PATCH 8/15] Respect length of watchpoints Jan Kiszka
2008-06-23 14:29 ` [Qemu-devel] [PATCH 9/15] Restore pc on watchpoint hits Jan Kiszka
2008-06-23 14:30 ` [Qemu-devel] [PATCH 10/15] Remove premature memop TB terminations Jan Kiszka
2008-06-23 14:31 ` [Qemu-devel] [PATCH 11/15] Improve debugging of SMP guests - v2 Jan Kiszka
2008-06-23 14:32 ` [Qemu-devel] [PATCH 12/15] Introduce BP_WATCHPOINT_HIT flag Jan Kiszka
2008-06-23 14:32 ` [Qemu-devel] [PATCH 13/15] Add debug exception hook Jan Kiszka
2008-06-23 14:33 ` [Qemu-devel] [PATCH 14/15] Introduce BP_CPU as a breakpoint type Jan Kiszka
2008-06-23 14:33 ` [Qemu-devel] [PATCH 15/15] x86: Debug register emulation Jan Kiszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=485FB2D4.5050601@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.