Toshiba laptop bluetooth power control patch

[Phillip Killewald <killewald.1@osu.edu>]

Greetings,

This is my first post to the kernel mailing list.  I have found many
people having the same problem with Toshiba laptops and their bluetooth
devices.  Namely, the bluetooth device starts in a powered-off state,
but the current toshiba_acpi module does not easily offer the option of
modifying that state.  To rectify this, I have modified a version of a
patch to toshiba_acpi.c found at
http://www.sfires.net/toshiba/index.html, and have been using it
successfully on my Toshiba M400 with all of the kernel versions since
2.6.21.  The patch creates an entry /proc/acpi/toshiba/bluetooth, which
you can use to power-up and attach the bluetooth device with the
commands cat 'power: 1' >> /proc/acpi/toshiba/bluetooth and 'attach: 1'
>> /proc/acpi/toshiba/bluetooth.

Is there any way these changes can be incorporated into the kernel so I
do not have to continually patch my system at every upgrade?  The text
of the patch is below.


----------
--- /usr/src/linux/drivers/acpi/toshiba_acpi.c.orig    2007-05-30
03:03:09.000000000 -0400
+++ drivers/acpi/toshiba_acpi.c    2007-05-30 10:24:35.000000000 -0400
@@ -33,7 +33,7 @@
  *
  */
 
-#define TOSHIBA_ACPI_VERSION    "0.18"
+#define TOSHIBA_ACPI_VERSION    "0.18-p2"
 #define PROC_INTERFACE_VERSION    1
 
 #include <linux/kernel.h>
@@ -210,6 +210,26 @@
     *result = (status == AE_OK) ? out[0] : HCI_FAILURE;
     return status;
 }
+static acpi_status hci_write2(u32 reg, u32 in1, u32 in2, u32* result)
+{
+    u32 in[HCI_WORDS] = { HCI_SET, reg, in1, in2, 0, 0 };
+    u32 out[HCI_WORDS];
+    acpi_status status = hci_raw(in, out);
+    *result = (status == AE_OK) ? out[0] : HCI_FAILURE;
+    return status;
+}
+
+static acpi_status hci_read2(u32 reg, u32* out1, u32* out2, u32* result)
+{
+    u32 in[HCI_WORDS] = { HCI_GET, reg, *out1, *out2, 0, 0 };
+    u32 out[HCI_WORDS];
+    acpi_status status = hci_raw(in, out);
+    *out1 = out[2];
+    *out2 = out[3];
+    *result = (status == AE_OK) ? out[0] : HCI_FAILURE;
+    return status;
+}
+
 
 static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ;
 static struct backlight_device *toshiba_backlight_device;
@@ -482,6 +502,161 @@
     return count;
 }
 
+static char* read_wk(char* p)
+{
+    u32 hci_result;
+    u32 value, value2;
+    value = 0;
+    value2 = 0x0001;
+    hci_read2(0x0056, &value, &value2, &hci_result);
+    if (hci_result == HCI_SUCCESS) {
+        p += sprintf(p,"wireless key:                  %d\n", value );
+    } else {
+        p += sprintf(p, "ERROR\n");
+    }
+
+    return p;
+}
+
+static char* read_bt(char* p)
+{
+    u32 hci_result;
+    u32 value, value2;
+    value = 0;
+    value2 = 0;
+    hci_read2(0x0056, &value, &value2, &hci_result);
+    if (hci_result == HCI_SUCCESS) {
+/*      p += sprintf(p,"present:                  %d\n", value);*/
+        p += sprintf(p,"present:                  %d\n", (value &
0x0f)?1:0);
+    } else {
+        p += sprintf(p, "ERROR\n");
+    }
+    value = 0;
+    value2 = 0x0001;
+    hci_read2(0x0056, &value, &value2, &hci_result);
+    if (hci_result == HCI_SUCCESS) {
+        p += sprintf(p,"power:                    %d\n", (value & 128)
>> 7);
+        p += sprintf(p,"attach:                   %d\n", (value &  64)
>> 6);
+        p += sprintf(p,"wireless:                 %d\n", (value & 512)
>> 9);
+    } else {
+        p += sprintf(p, "ERROR\n");
+    }
+
+    return p;
+}
+
+static unsigned long write_bt(const char* buffer, unsigned long count)
+{
+    int value, value2;
+    u32 hci_result;
+    value2 = 0x0080;
+
+    if (sscanf(buffer, " power : %i", &value) == 1 &&
+               value >= 0 && value <= 1) {
+        hci_write2(0x0056, value, value2, &hci_result);
+        if (hci_result != HCI_SUCCESS)
+            return -EFAULT;
+    } else if (sscanf(buffer, " attach : %i", &value) == 1 &&
+                    value >= 0 && value <= 1) {
+        value2 = 0x0040;
+        hci_write2(0x0056, value, value2, &hci_result);
+        if (hci_result != HCI_SUCCESS)
+            return -EFAULT;
+    } else if (sscanf(buffer, " orinoco : %i", &value) == 1 &&
+                    value >= 0 && value <= 1) {
+        value2 = 0x0200;
+        hci_write2(0x0056, value, value2, &hci_result);
+        if (hci_result != HCI_SUCCESS)
+            return -EFAULT;
+    } else {
+        return -EINVAL;
+    }
+
+    return count;
+}
+/*
+static char* read_arb(char* p)
+{
+    u32 hci_result;
+    u32 value, value2;
+    value = 0;
+    value2 = arbitrary2;
+   
+    p += sprintf(p,"arg1 :                  %d\n", value  );
+    p += sprintf(p,"arg2 :                  %d\n", value2 );
+
+    hci_read2(arbitrary, &value, &value2, &hci_result);
+    if (hci_result == HCI_SUCCESS) {
+        p += sprintf(p,"arbitrary call:           %d\n", arbitrary);
+        p += sprintf(p,"return1:                  %x\n", value);
+        p += sprintf(p,"return2:                  %x\n",value2);
+    } else
+        p += sprintf(p, "ERROR\n");
+
+    return p;
+}
+
+static unsigned long write_arb(const char* buffer, unsigned long count)
+{
+    int value, value2, i;
+    value2 = 0x0080;
+
+    sscanf(buffer, " arb : %i", &value) ;
+        arbitrary=value;
+    i=0;
+    while(buffer[i]!=';')i++; 
+    if (sscanf(buffer+i+1, " arb2 : %i", &value) == 1 )
+        arbitrary2=value;
+    else     
+            return -EINVAL;
+
+    return count;
+}
+
+
+static char* read_arb_c(char* p)
+{
+    u32 hci_result;
+    u32 value, value2;
+
+    value = arbitrary1;
+    value2 = arbitrary2;
+    p += sprintf(p,"arg1 :                  %d\n", value  );
+    p += sprintf(p,"arg2 :                  %d\n", value2 );
+
+    hci_write2(arbitrary, value, value2, &hci_result);
+    if (hci_result == HCI_SUCCESS) {
+        p += sprintf(p,"arbitrary call:                  %d\n", arbitrary);
+        p += sprintf(p,"return1:                  %d\n", value);
+        p += sprintf(p,"return2:                  %d\n",value2);
+    } else
+        p += sprintf(p, "ERROR\n");
+
+    return p;
+}
+
+static unsigned long write_arb_c(const char* buffer, unsigned long count)
+{
+    int value, value2, i;
+    value2 = 0x0080;
+
+    sscanf(buffer, " arb : %i", &value) ;
+    arbitrary=value;
+    i=0;
+    while(buffer[i]!=';')i++;
+    sscanf(buffer+i+1, " arb2 : %i", &value);
+    arbitrary2=value;
+    i++; 
+    while(buffer[i]!=';')i++; 
+    if (sscanf(buffer+i+1, " arb1 : %i", &value) == 1 )
+        arbitrary1=value;
+    else     
+        return -EINVAL;
+
+    return count;
+}
+*/
+
 static char *read_version(char *p)
 {
     p += sprintf(p, "driver:                  %s\n", TOSHIBA_ACPI_VERSION);
@@ -501,6 +676,8 @@
     {"fan", read_fan, write_fan},
     {"keys", read_keys, write_keys},
     {"version", read_version, NULL},
+    {"wireless_key",read_wk,0},
+    {"bluetooth",read_bt,write_bt},
     {NULL}
 };
----------


-- 
/**********************************/
// Phillip Killewald
// CMS Graduate Research Assistant
// The Ohio State University
// [paste@mps.ohio-state.edu]
// [killewald.1@osu.edu]
// [paste@cern.ch]
/************No Comment************/

printk(" Speed now 1x");        /* Pull my finger! */
        linux-2.6.6/drivers/cdrom/mcd.c