From: Hin-Tak Leung <hintak_leung@yahoo.co.uk>
To: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@redhat.com>,
flamingice@sourmilk.net, Andrea Merello <andreamrl@tiscali.it>
Cc: Herton Ronaldo Krzesinski <herton@mandriva.com.br>,
Larry Finger <Larry.Finger@lwfinger.net>,
Pavel Roskin <proski@gnu.org>
Subject: Re: [PATCH 5/6] rtl8187: change part 2 of rtl8187_dev.c to support RTL8187B
Date: Tue, 08 Jul 2008 07:54:53 +0100 [thread overview]
Message-ID: <48730F3D.3090909@yahoo.co.uk> (raw)
In-Reply-To: <4873088C.2090603@yahoo.co.uk>
rtl8187: change part 2 of rtl8187_dev.c to support RTL8187B
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Pavel Roskin <proski@gnu.org>
---
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index b17f237..e013eee 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -155,9 +155,11 @@ static void rtl8187_tx_cb(struct urb *urb)
struct sk_buff *skb = (struct sk_buff *)urb->context;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hw *hw = info->driver_data[0];
+ struct rtl8187_priv *priv = hw->priv;
usb_free_urb(info->driver_data[1]);
- skb_pull(skb, sizeof(struct rtl8187_tx_hdr));
+ skb_pull(skb, priv->is_rtl8187b ? sizeof(struct rtl8187b_tx_hdr) :
+ sizeof(struct rtl8187_tx_hdr));
memset(&info->status, 0, sizeof(info->status));
info->flags |= IEEE80211_TX_STAT_ACK;
ieee80211_tx_status_irqsafe(hw, skb);
@@ -167,7 +169,8 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct
sk_buff *skb)
{
struct rtl8187_priv *priv = dev->priv;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct rtl8187_tx_hdr *hdr;
+ unsigned int ep;
+ void *buf;
struct urb *urb;
__le16 rts_dur = 0;
u32 flags;
@@ -195,16 +198,47 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct
sk_buff *skb)
flags |= ieee80211_get_rts_cts_rate(dev, info)->hw_value << 19;
}
- hdr = (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
- hdr->flags = cpu_to_le32(flags);
- hdr->len = 0;
- hdr->rts_duration = rts_dur;
- hdr->retry = cpu_to_le32(info->control.retry_limit << 8);
+ if (!priv->is_rtl8187b) {
+ struct rtl8187_tx_hdr *hdr =
+ (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr));
+ hdr->flags = cpu_to_le32(flags);
+ hdr->len = 0;
+ hdr->rts_duration = rts_dur;
+ hdr->retry = cpu_to_le32(info->control.retry_limit << 8);
+ buf = hdr;
+
+ ep = 2;
+ } else {
+ /* fc needs to be calculated before skb_push() */
+ unsigned int epmap[4] = { 6, 7, 5, 4 };
+ struct ieee80211_hdr *tx_hdr =
+ (struct ieee80211_hdr *)(skb->data);
+ u16 fc = le16_to_cpu(tx_hdr->frame_control);
+
+ struct rtl8187b_tx_hdr *hdr =
+ (struct rtl8187b_tx_hdr *)skb_push(skb, sizeof(*hdr));
+ struct ieee80211_rate *txrate =
+ ieee80211_get_tx_rate(dev, info);
+ memset(hdr, 0, sizeof(*hdr));
+ hdr->flags = cpu_to_le32(flags);
+ hdr->rts_duration = rts_dur;
+ hdr->retry = cpu_to_le32(info->control.retry_limit << 8);
+ hdr->tx_duration =
+ ieee80211_generic_frame_duration(dev, priv->vif,
+ skb->len, txrate);
+ buf = hdr;
+
+ if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT)
+ ep = 12;
+ else
+ ep = epmap[skb_get_queue_mapping(skb)];
+ }
info->driver_data[0] = dev;
info->driver_data[1] = urb;
- usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, 2),
- hdr, skb->len, rtl8187_tx_cb, skb);
+
+ usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep),
+ buf, skb->len, rtl8187_tx_cb, skb);
rc = usb_submit_urb(urb, GFP_ATOMIC);
if (rc < 0) {
usb_free_urb(urb);
@@ -220,7 +254,6 @@ static void rtl8187_rx_cb(struct urb *urb)
struct rtl8187_rx_info *info = (struct rtl8187_rx_info *)skb->cb;
struct ieee80211_hw *dev = info->dev;
struct rtl8187_priv *priv = dev->priv;
- struct rtl8187_rx_hdr *hdr;
struct ieee80211_rx_status rx_status = { 0 };
int rate, signal;
u32 flags;
@@ -241,11 +274,33 @@ static void rtl8187_rx_cb(struct urb *urb)
}
skb_put(skb, urb->actual_length);
- hdr = (struct rtl8187_rx_hdr *)(skb_tail_pointer(skb) - sizeof(*hdr));
- flags = le32_to_cpu(hdr->flags);
- skb_trim(skb, flags & 0x0FFF);
+ if (!priv->is_rtl8187b) {
+ struct rtl8187_rx_hdr *hdr =
+ (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
+ flags = le32_to_cpu(hdr->flags);
+ signal = hdr->signal & 0x7f;
+ rx_status.antenna = (hdr->signal >> 7) & 1;
+ rx_status.signal = signal;
+ rx_status.noise = hdr->noise;
+ rx_status.mactime = le64_to_cpu(hdr->mac_time);
+ priv->signal = signal;
+ priv->quality = signal;
+ priv->noise = hdr->noise;
+ } else {
+ struct rtl8187b_rx_hdr *hdr =
+ (typeof(hdr))(skb_tail_pointer(skb) - sizeof(*hdr));
+ flags = le32_to_cpu(hdr->flags);
+ signal = hdr->agc >> 1;
+ rx_status.antenna = (hdr->signal >> 7) & 1;
+ rx_status.signal = 64 - min(hdr->noise, (u8)64);
+ rx_status.noise = hdr->noise;
+ rx_status.mactime = le64_to_cpu(hdr->mac_time);
+ priv->signal = hdr->signal;
+ priv->quality = hdr->agc >> 1;
+ priv->noise = hdr->noise;
+ }
- signal = hdr->agc >> 1;
+ skb_trim(skb, flags & 0x0FFF);
rate = (flags >> 20) & 0xF;
if (rate > 3) { /* OFDM rate */
if (signal > 90)
@@ -261,13 +316,11 @@ static void rtl8187_rx_cb(struct urb *urb)
signal = 95 - signal;
}
- rx_status.antenna = (hdr->signal >> 7) & 1;
- rx_status.qual = 64 - min(hdr->noise, (u8)64);
+ rx_status.qual = priv->quality;
rx_status.signal = signal;
rx_status.rate_idx = rate;
rx_status.freq = dev->conf.channel->center_freq;
rx_status.band = dev->conf.channel->band;
- rx_status.mactime = le64_to_cpu(hdr->mac_time);
rx_status.flag |= RX_FLAG_TSFT;
if (flags & (1 << 13))
rx_status.flag |= RX_FLAG_FAILED_FCS_CRC;
@@ -307,7 +360,8 @@ static int rtl8187_init_urbs(struct ieee80211_hw *dev)
break;
}
usb_fill_bulk_urb(entry, priv->udev,
- usb_rcvbulkpipe(priv->udev, 1),
+ usb_rcvbulkpipe(priv->udev,
+ priv->is_rtl8187b ? 3 : 1),
skb_tail_pointer(skb),
RTL8187_MAX_RX, rtl8187_rx_cb, skb);
info = (struct rtl8187_rx_info *)skb->cb;
@@ -786,18 +840,20 @@ static int rtl8187_config(struct ieee80211_hw *dev, struct
ieee80211_conf *conf)
msleep(10);
rtl818x_iowrite32(priv, &priv->map->TX_CONF, reg);
- rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
-
- if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) {
- rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
- rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
- rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14);
- rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0x73);
- } else {
- rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
- rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
- rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24);
- rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0xa5);
+ if (!priv->is_rtl8187b) {
+ rtl818x_iowrite8(priv, &priv->map->SIFS, 0x22);
+
+ if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) {
+ rtl818x_iowrite8(priv, &priv->map->SLOT, 0x9);
+ rtl818x_iowrite8(priv, &priv->map->DIFS, 0x14);
+ rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x14);
+ rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0x73);
+ } else {
+ rtl818x_iowrite8(priv, &priv->map->SLOT, 0x14);
+ rtl818x_iowrite8(priv, &priv->map->DIFS, 0x24);
+ rtl818x_iowrite8(priv, &priv->map->EIFS, 91 - 0x24);
+ rtl818x_iowrite8(priv, &priv->map->CW_VAL, 0xa5);
+ }
}
rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
@@ -813,14 +869,20 @@ static int rtl8187_config_interface(struct ieee80211_hw *dev,
{
struct rtl8187_priv *priv = dev->priv;
int i;
+ u8 reg;
for (i = 0; i < ETH_ALEN; i++)
rtl818x_iowrite8(priv, &priv->map->BSSID[i], conf->bssid[i]);
- if (is_valid_ether_addr(conf->bssid))
- rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_INFRA);
- else
- rtl818x_iowrite8(priv, &priv->map->MSR, RTL818X_MSR_NO_LINK);
+ if (is_valid_ether_addr(conf->bssid)) {
+ reg = RTL818X_MSR_INFRA;
+ if (priv->is_rtl8187b)
+ reg |= RTL818X_MSR_ENEDCA;
+ rtl818x_iowrite8(priv, &priv->map->MSR, reg);
+ } else {
+ reg = RTL818X_MSR_NO_LINK;
+ rtl818x_iowrite8(priv, &priv->map->MSR, reg);
+ }
return 0;
}
@@ -907,6 +969,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
struct rtl8187_priv *priv;
struct eeprom_93cx6 eeprom;
struct ieee80211_channel *channel;
+ const char *chip_name;
u16 txpwr, reg;
int err, i;
DECLARE_MAC_BUF(mac);
@@ -918,6 +981,8 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
}
priv = dev->priv;
+ priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B) ||
+ !memcmp(udev->product, "RTL8187B", 8);
SET_IEEE80211_DEV(dev, &intf->dev);
usb_set_intfdata(intf, dev);
@@ -946,8 +1011,13 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_UNSPEC;
- dev->extra_tx_headroom = sizeof(struct rtl8187_tx_hdr);
- dev->queues = 1;
+ dev->extra_tx_headroom = (!priv->is_rtl8187b) ?
+ sizeof(struct rtl8187_tx_hdr) :
+ sizeof(struct rtl8187b_tx_hdr);
+ if (!priv->is_rtl8187b)
+ dev->queues = 1;
+ else
+ dev->queues = 4;
dev->max_signal = 65;
eeprom.data = dev;
@@ -982,10 +1052,24 @@ static int __devinit rtl8187_probe(struct usb_interface
*intf,
(*channel++).hw_value = txpwr & 0xFF;
(*channel++).hw_value = txpwr >> 8;
}
- for (i = 0; i < 2; i++) {
- eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6 + i,
+ if (!priv->is_rtl8187b) {
+ for (i = 0; i < 2; i++) {
+ eeprom_93cx6_read(&eeprom,
+ RTL8187_EEPROM_TXPWR_CHAN_6 + i,
+ &txpwr);
+ (*channel++).hw_value = txpwr & 0xFF;
+ (*channel++).hw_value = txpwr >> 8;
+ }
+ } else {
+ eeprom_93cx6_read(&eeprom, RTL8187_EEPROM_TXPWR_CHAN_6,
&txpwr);
(*channel++).hw_value = txpwr & 0xFF;
+
+ eeprom_93cx6_read(&eeprom, 0x0A, &txpwr);
+ (*channel++).hw_value = txpwr & 0xFF;
+
+ eeprom_93cx6_read(&eeprom, 0x1C, &txpwr);
+ (*channel++).hw_value = txpwr & 0xFF;
(*channel++).hw_value = txpwr >> 8;
}
@@ -1001,6 +1085,50 @@ static int __devinit rtl8187_probe(struct usb_interface
*intf,
rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+ if (!priv->is_rtl8187b) {
+ u32 reg32;
+ reg32 = rtl818x_ioread32(priv, &priv->map->TX_CONF);
+ reg32 &= RTL818X_TX_CONF_HWVER_MASK;
+ switch (reg32) {
+ case RTL818X_TX_CONF_R8187vD_1:
+ case RTL818X_TX_CONF_R8187vD_2:
+ chip_name = "RTL8187vD";
+ break;
+ default:
+ chip_name = "RTL8187vB (default)";
+ }
+ } else {
+ printk(KERN_WARNING "rtl8187: 8187B chip detected. Support "
+ "is EXPERIMENTAL, and could damage your\n"
+ " hardware, use at your own risk\n");
+ /*
+ * Force USB request to write radio registers for 8187B, Realtek
+ * only uses it in their sources
+ */
+ /*if (priv->asic_rev == 0) {
+ printk(KERN_WARNING "rtl8187: Forcing use of USB "
+ "requests to write to radio registers\n");
+ priv->asic_rev = 1;
+ }*/
+ switch (rtl818x_ioread8(priv, (u8 *)0xFFE1)) {
+ case RTL818X_R8187B_B:
+ chip_name = "RTL8187BvB";
+ priv->hw_rev = RTL8187BvB;
+ break;
+ case RTL818X_R8187B_D:
+ chip_name = "RTL8187BvD";
+ priv->hw_rev = RTL8187BvD;
+ break;
+ case RTL818X_R8187B_E:
+ chip_name = "RTL8187BvE";
+ priv->hw_rev = RTL8187BvE;
+ break;
+ default:
+ chip_name = "RTL8187BvB (default)";
+ priv->hw_rev = RTL8187BvB;
+ }
+ }
+
priv->rf = rtl8187_detect_rf(dev);
err = ieee80211_register_hw(dev);
@@ -1009,9 +1137,9 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
goto err_free_dev;
}
- printk(KERN_INFO "%s: hwaddr %s, rtl8187 V%d + %s\n",
+ printk(KERN_INFO "%s: hwaddr %s, %s V%d + %s\n",
wiphy_name(dev->wiphy), print_mac(mac, dev->wiphy->perm_addr),
- priv->asic_rev, priv->rf->name);
+ chip_name, priv->asic_rev, priv->rf->name);
return 0;
next prev parent reply other threads:[~2008-07-08 6:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-08 6:26 [PATCH 0/6] rtl8187: Adding Realtek rtl8187B support Hin-Tak Leung
2008-07-08 6:30 ` [PATCH 1/6] " Hin-Tak Leung
2008-07-08 6:38 ` [PATCH 1/6] rtl8187: updating rtl8187.h to support RTL8187B Hin-Tak Leung
2008-07-08 6:41 ` [PATCH 2/6] rtl8187: updating rtl818x.h " Hin-Tak Leung
2008-07-08 6:46 ` [PATCH 3/6] rtl8187: updating rtl8187_rtl8225.c " Hin-Tak Leung
2008-07-08 6:52 ` [PATCH 4/6] rtl8187: change part 1 of rtl8187_dev.c " Hin-Tak Leung
2008-07-08 6:54 ` Hin-Tak Leung [this message]
2008-07-08 6:57 ` [PATCH 6/6] rtl8187: updating Kconfig " Hin-Tak Leung
-- strict thread matches above, loose matches on Subject: below --
2008-07-08 11:36 [PATCH 5/6] rtl8187: change part 2 of rtl8187_dev.c " Hin-Tak Leung
2008-07-08 16:18 [PATCH 1/6] rtl8187: updating rtl8187.h " Hin-Tak Leung
2008-07-08 16:18 ` [PATCH 2/6] rtl8187: updating rtl818x.h " Hin-Tak Leung
2008-07-08 16:18 ` [PATCH 3/6] rtl8187: updating rtl8187_rtl8225.c " Hin-Tak Leung
2008-07-08 16:18 ` [PATCH 4/6] rtl8187: change part 1 of rtl8187_dev.c " Hin-Tak Leung
2008-07-08 16:18 ` [PATCH 5/6] rtl8187: change part 2 " Hin-Tak Leung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48730F3D.3090909@yahoo.co.uk \
--to=hintak_leung@yahoo.co.uk \
--cc=Larry.Finger@lwfinger.net \
--cc=andreamrl@tiscali.it \
--cc=flamingice@sourmilk.net \
--cc=herton@mandriva.com.br \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@redhat.com \
--cc=proski@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.