All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mike Travis <travis@sgi.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: Vegard Nossum <vegard.nossum@gmail.com>,
	"akpm@linux-foundation.org" <akpm@linux-foundation.org>,
	mm-commits@vger.kernel.org, Yinghai Lu <yhlu.kernel@gmail.com>,
	LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/1] x86: Change _node_to_cpumask_ptr to return const ptr
Date: Tue, 08 Jul 2008 10:06:15 -0700	[thread overview]
Message-ID: <48739E87.2060604@sgi.com> (raw)
In-Reply-To: <20080703090100.GA10872@elte.hu>

Ingo Molnar wrote:
> * Vegard Nossum <vegard.nossum@gmail.com> wrote:
> 
>> On Thu, Jul 3, 2008 at 10:44 AM, Ingo Molnar <mingo@elte.hu> wrote:
>>> * Mike Travis <travis@sgi.com> wrote:
>>>
>>>> Subject: [PATCH 1/1] x86: Add check for node passed to node_to_cpumask V3
>>>>
>>>>   * When CONFIG_DEBUG_PER_CPU_MAPS is set, the node passed to
>>>>     node_to_cpumask and node_to_cpumask_ptr should be validated.
>>>>     If invalid, then a dump_stack is performed and a zero cpumask
>>>>     is returned.
>>>>
>>>> Based on "Fri Jun 27 10:06:06 PDT 2008" tip/master...  ;-)
>>>>
>>>> Signed-off-by: Mike Travis <travis@sgi.com>
>>>> ---
>>>> V2: Slightly different version to remove a compiler warning.
>>>> V3: Redone to reflect moving setup.c -> setup_percpu.c
>>> applied to tip/x86/unify-setup - thanks Mike.
>>>
>>> Vegard, can i add your Acked-by too?
>> To be honest, I'd prefer that the function returns a const pointer. 
>> Mike and I have both reviewed all callers independently and concluded 
>> that there is no problem in doing this, and that, in fact, this is the 
>> correct way to deal with it.
>>
>> So if Mike submits a V4 with this const return type, or another patch 
>> on top of this one, I'll ack it :-)
> 
> ok, i'll wait for v4 :)
> 
> (v3 is applied already so Mike please send a delta to v3.)
> 
> 	Ingo

Subject: [PATCH 1/1] x86: Change _node_to_cpumask_ptr to return const ptr

  * Strengthen the return type for the _node_to_cpumask_ptr to be
    a const pointer.  This adds compiler checking to insure that
    node_to_cpumask_map[] is not changed inadvertently.

Applies to tip/master with the following patch applied:

	"[PATCH 1/1] x86: Add check for node passed to node_to_cpumask V3"

Signed-off-by: Mike Travis <travis@sgi.com>
---
Note: I did not change node_to_cpumask_ptr() in include/asm-generic/topology.h
      as node_to_cpumask_ptr_next() does change the cpumask value.
---
 arch/x86/kernel/setup_percpu.c |    8 ++++----
 include/asm-x86/topology.h     |   10 +++++-----
 2 files changed, 9 insertions(+), 9 deletions(-)

--- linux-2.6.tip.orig/arch/x86/kernel/setup_percpu.c
+++ linux-2.6.tip/arch/x86/kernel/setup_percpu.c
@@ -353,23 +353,23 @@ static const cpumask_t cpu_mask_none;
 /*
  * Returns a pointer to the bitmask of CPUs on Node 'node'.
  */
-cpumask_t *_node_to_cpumask_ptr(int node)
+const cpumask_t *_node_to_cpumask_ptr(int node)
 {
 	if (node_to_cpumask_map == NULL) {
 		printk(KERN_WARNING
 			"_node_to_cpumask_ptr(%d): no node_to_cpumask_map!\n",
 			node);
 		dump_stack();
-		return &cpu_online_map;
+		return (const cpumask_t *)&cpu_online_map;
 	}
 	if (node >= nr_node_ids) {
 		printk(KERN_WARNING
 			"_node_to_cpumask_ptr(%d): node > nr_node_ids(%d)\n",
 			node, nr_node_ids);
 		dump_stack();
-		return (cpumask_t *)&cpu_mask_none;
+		return &cpu_mask_none;
 	}
-	return (cpumask_t *)&node_to_cpumask_map[node];
+	return &node_to_cpumask_map[node];
 }
 EXPORT_SYMBOL(_node_to_cpumask_ptr);
 
--- linux-2.6.tip.orig/include/asm-x86/topology.h
+++ linux-2.6.tip/include/asm-x86/topology.h
@@ -82,7 +82,7 @@ DECLARE_EARLY_PER_CPU(int, x86_cpu_to_no
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
 extern int cpu_to_node(int cpu);
 extern int early_cpu_to_node(int cpu);
-extern cpumask_t *_node_to_cpumask_ptr(int node);
+extern const cpumask_t *_node_to_cpumask_ptr(int node);
 extern cpumask_t node_to_cpumask(int node);
 
 #else	/* !CONFIG_DEBUG_PER_CPU_MAPS */
@@ -103,7 +103,7 @@ static inline int early_cpu_to_node(int 
 }
 
 /* Returns a pointer to the cpumask of CPUs on Node 'node'. */
-static inline cpumask_t *_node_to_cpumask_ptr(int node)
+static inline const cpumask_t *_node_to_cpumask_ptr(int node)
 {
 	return &node_to_cpumask_map[node];
 }
@@ -118,7 +118,7 @@ static inline cpumask_t node_to_cpumask(
 
 /* Replace default node_to_cpumask_ptr with optimized version */
 #define node_to_cpumask_ptr(v, node)		\
-		cpumask_t *v = _node_to_cpumask_ptr(node)
+		const cpumask_t *v = _node_to_cpumask_ptr(node)
 
 #define node_to_cpumask_ptr_next(v, node)	\
 			   v = _node_to_cpumask_ptr(node)
@@ -186,7 +186,7 @@ extern int __node_distance(int, int);
 #define	cpu_to_node(cpu)	0
 #define	early_cpu_to_node(cpu)	0
 
-static inline cpumask_t *_node_to_cpumask_ptr(int node)
+static inline const cpumask_t *_node_to_cpumask_ptr(int node)
 {
 	return &cpu_online_map;
 }
@@ -201,7 +201,7 @@ static inline int node_to_first_cpu(int 
 
 /* Replace default node_to_cpumask_ptr with optimized version */
 #define node_to_cpumask_ptr(v, node)		\
-		cpumask_t *v = _node_to_cpumask_ptr(node)
+		const cpumask_t *v = _node_to_cpumask_ptr(node)
 
 #define node_to_cpumask_ptr_next(v, node)	\
 			   v = _node_to_cpumask_ptr(node)

  reply	other threads:[~2008-07-08 17:06 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-09  9:18 + fix-x86_64-splat.patch added to -mm tree akpm
     [not found] ` <19f34abd0806090420r4100241cgb4b828441de3b102@mail.gmail.com>
     [not found]   ` <20080609113547.GA1534@elte.hu>
     [not found]     ` <484D54F2.4070603@sgi.com>
     [not found]       ` <20080626113229.GB29619@elte.hu>
2008-06-26 16:26         ` [PATCH 1/1] x86: Add check for node passed to node_to_cpumask Mike Travis
2008-06-27  2:39           ` [PATCH 1/1] x86: Add check for node passed to node_to_cpumask V2 Mike Travis
2008-06-27 17:10             ` [PATCH 1/1] x86: Add check for node passed to node_to_cpumask V3 Mike Travis
2008-06-27 17:24               ` Vegard Nossum
2008-06-27 18:03                 ` Mike Travis
2008-06-29 11:34                   ` Vegard Nossum
2008-06-29 12:40                     ` Mike Travis
2008-07-03  8:44               ` Ingo Molnar
2008-07-03  8:55                 ` Vegard Nossum
2008-07-03  9:01                   ` Ingo Molnar
2008-07-08 17:06                     ` Mike Travis [this message]
2008-07-08 17:35                       ` [PATCH 1/1] x86: Change _node_to_cpumask_ptr to return const ptr Vegard Nossum
2008-07-08 18:05                         ` Mike Travis
2008-07-08 18:22                           ` Vegard Nossum
2008-07-08 20:51                             ` Mike Travis
2008-07-08 21:21                               ` Vegard Nossum
2008-07-08 21:28                                 ` Mike Travis
2008-07-08 21:35                                 ` Mike Travis
2008-07-08 21:52                                   ` Vegard Nossum
2008-07-13 17:12                                     ` Ingo Molnar
2008-07-07 17:23                   ` [PATCH 1/1] x86: Add check for node passed to node_to_cpumask V3 Mike Travis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48739E87.2060604@sgi.com \
    --to=travis@sgi.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=mm-commits@vger.kernel.org \
    --cc=vegard.nossum@gmail.com \
    --cc=yhlu.kernel@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.