From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH 3/7] sbc8560: define eth0 and eth1 instead of eth1 and eth2
Date: Fri, 11 Jul 2008 18:03:52 -0400 [thread overview]
Message-ID: <4877D8C8.7010300@windriver.com> (raw)
In-Reply-To: <20080711202420.C5DD524304@gemini.denx.de>
Wolfgang Denk wrote:
>
>
>> + * MAC addresses directly on it.
>> + */
>> +#if 0
>> +#define CONFIG_ETHADDR 00:01:af:07:9b:8a
>> +#define CONFIG_ETH1ADDR 00:01:af:07:9b:8b
>> #define CONFIG_SERVERIP 192.168.0.131
>> #define CONFIG_IPADDR 192.168.0.105
>> -#define CONFIG_GATEWAYIP 0.0.0.0
>> +#define CONFIG_GATEWAYIP 192.168.0.1
>> #define CONFIG_NETMASK 255.255.255.0
>> +#endif
>> +
>>
>
> I think this should be removed. There is really no good reason to add
> network configuration at all to the board config file (with the
> exception of the 2 or 3 boards which actually boot from real ROM).
>
No problem. I'll remove and resend.
Thanks,
Paul.
>
>
> Best regards,
>
> Wolfgang Denk
>
>
next prev parent reply other threads:[~2008-07-11 22:03 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-11 19:33 [U-Boot-Users] [PATCH 0/6] Update sbc8560; enable fdt/powerpc support Paul Gortmaker
2008-07-11 19:33 ` [U-Boot-Users] [PATCH 1/7] sbc8560: proper definitions for TSEC Paul Gortmaker
2008-07-11 19:33 ` [U-Boot-Users] [PATCH 2/7] sbc8560: properly set cs0_bnds for 512MB Paul Gortmaker
2008-07-11 19:33 ` [U-Boot-Users] [PATCH 3/7] sbc8560: define eth0 and eth1 instead of eth1 and eth2 Paul Gortmaker
2008-07-11 19:33 ` [U-Boot-Users] [PATCH 4/7] sbc8560: add in ft_board_setup() Paul Gortmaker
2008-07-11 19:33 ` [U-Boot-Users] [PATCH 5/7] sbc8560: add default fdt values Paul Gortmaker
2008-07-11 19:33 ` [U-Boot-Users] [PATCH 6/7] sbc8560: enable CONFIG_OF_LIBFDT by default Paul Gortmaker
2008-07-15 1:09 ` Andy Fleming
2008-07-11 20:30 ` [U-Boot-Users] [PATCH 5/7] sbc8560: add default fdt values Wolfgang Denk
2008-07-11 22:02 ` Paul Gortmaker
2008-07-15 1:06 ` Andy Fleming
2008-07-15 1:07 ` [U-Boot-Users] [PATCH 4/7] sbc8560: add in ft_board_setup() Andy Fleming
2008-07-11 19:41 ` [U-Boot-Users] [PATCH 3/7] sbc8560: define eth0 and eth1 instead of eth1 and eth2 Ben Warren
2008-07-11 20:24 ` Wolfgang Denk
2008-07-11 22:03 ` Paul Gortmaker [this message]
2008-07-15 0:51 ` Andy Fleming
2008-07-15 6:25 ` Wolfgang Denk
2008-07-15 13:14 ` Ben Warren
2008-07-15 13:28 ` Paul Gortmaker
2008-07-15 1:07 ` [U-Boot-Users] [PATCH 2/7] sbc8560: properly set cs0_bnds for 512MB Andy Fleming
2008-07-15 0:34 ` [U-Boot-Users] [PATCH 1/7] sbc8560: proper definitions for TSEC Andy Fleming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4877D8C8.7010300@windriver.com \
--to=paul.gortmaker@windriver.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.