All of lore.kernel.org
 help / color / mirror / Atom feed
From: Edward Shishkin <edward.shishkin@gmail.com>
To: doiggl@velocitynet.com.au
Cc: Jeff Mahoney <jeffm@suse.com>,
	"reiserfs-devel@vger.kernel.org" <reiserfs-devel@vger.kernel.org>
Subject: Re: Nightly Builds
Date: Sun, 13 Jul 2008 21:00:33 +0400	[thread overview]
Message-ID: <487A34B1.5010309@gmail.com> (raw)
In-Reply-To: <23441.202.168.22.19.1215958910.squirrel@webmail.velocity.net.au>

doiggl@velocitynet.com.au wrote:
> Hello,
> - I rebooted and now 'modprobe -v  reiser4' now shows activity:
> # modprobe -v  reiser4
> insmod
> /lib/modules/2.6.25.9-0.2-default/kernel/lib/zlib_deflate/zlib_deflate.ko
> insmod /lib/modules/2.6.25.9-0.2-default/kernel/lib/lzo/lzo_compress.ko
> insmod /lib/modules/2.6.25.9-0.2-default/kernel/lib/lzo/lzo_decompress.ko
> insmod /lib/modules/2.6.25.9-0.2-default/weak-updates/reiser4.ko
>
> -- Next my blank disk shows up as /dev/sda  .This is unformatted.
> So I tried formatting it,and got the following error:
>
> # mkfs.reiser4 -o create=ccreg40 /dev/sda
> mkfs.reiser4 1.0.6
> Copyright (C) 2001-2005 by Hans Reiser, licensing governed by
> reiser4progs/COPYING.
>
> Overriding the plugin profile by "create=ccreg40".
> Block size 4096 will be used.
> Linux 2.6.25.9-0.2-default is detected.
> Error: Device /dev/sda is an entire harddrive, not just one partition.
>
> -- So next I created an extended partition (entire disk) it with YAST,that
> worked, named /dev/sda1
> -- Next I tried to create a reiser4 filesystem on /dev/sda1 , and failed.
>   

You might want some tutorial about hard disk basic concepts.
Format logical partitions, not extended ones.

Thanks,
Edward.

>
> # mkfs.reiser4 -o create=ccreg40 /dev/sda1
> mkfs.reiser4 1.0.6
> Copyright (C) 2001-2005 by Hans Reiser, licensing governed by
> reiser4progs/COPYING.
>
> Overriding the plugin profile by "create=ccreg40".
> Block size 4096 will be used.
> Linux 2.6.25.9-0.2-default is detected.
> Uuid ceb5d729-091b-4524-84b0-2d014f297842 will be used.
> Reiser4 is going to be created on /dev/sda1.
> (Yes/No): y
> Error: Requested filesystem size (0) is too small. Reiser4 required
> minimal size 25 blocks long.
> Error: Can't create filesystem on /dev/sda1.
>
> # mkfs.reiser4 -V
> mkfs.reiser4 1.0.6
>
> The commands I used both failed.
> Question: How do I format (say 10GB) size part of the disk with
> mkfs.reiser4 with compression as well and what am I missing from the
> command ?
>
> Thankyou
> Glenn
>
>   
>> Jeff Wrote
>> Ok... But does the mount fail?
>>
>> --
>> Jeff Mahoney (mobile)
>> SuSE Labs
>>     
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe reiserfs-devel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>   


  reply	other threads:[~2008-07-13 17:00 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-20 19:42 Nightly Builds J. Todd Slack
2008-06-20 19:57 ` Jeff Mahoney
2008-06-22 14:51   ` doiggl
2008-06-22 16:06     ` Jeff Mahoney
2008-06-23  4:16       ` doiggl
2008-06-23 14:13         ` Jeff Mahoney
2008-06-24 14:44           ` doiggl
2008-06-24 14:58             ` Jeff Mahoney
2008-06-25 12:59               ` doiggl
2008-06-25 16:11                 ` Jeff Mahoney
2008-06-28  7:34                   ` doiggl
2008-06-28 15:23                     ` Jeff Mahoney
2008-06-29 14:02                       ` doiggl
2008-06-29 19:02                         ` Jeff Mahoney
2008-06-30 11:49                           ` doiggl
2008-06-30 14:55                             ` Jeff Mahoney
2008-07-01 13:48                               ` doiggl
2008-07-09 15:00                               ` doiggl
2008-07-09 15:11                                 ` Jeff Mahoney
2008-07-10 15:21                                   ` doiggl
2008-07-10 15:51                                     ` Jeff Mahoney
     [not found]                                       ` <27342.202.168.22.19.1215840119.squirrel@webmail .velocity.net.au>
2008-07-12  5:21                                       ` doiggl
2008-07-12  7:10                                         ` Jeff Mahoney
2008-07-13 14:21                                           ` doiggl
2008-07-13 17:00                                             ` Edward Shishkin [this message]
2008-07-14 13:39                                               ` doiggl
2008-07-14 18:21                                                 ` stroetmann
2008-07-14 20:51                                                   ` Edward Shishkin
2008-07-14 20:54                                                     ` J. Todd Slack
2008-07-14 21:20                                                       ` Volker Armin Hemmann
2008-07-14 21:53                                                         ` Christian Stroetmann
2008-07-14 21:42                                                     ` Christian Stroetmann
2008-07-14 22:26                                                       ` Volker Armin Hemmann
2008-07-14 22:37                                                         ` Christian Stroetmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=487A34B1.5010309@gmail.com \
    --to=edward.shishkin@gmail.com \
    --cc=doiggl@velocitynet.com.au \
    --cc=jeffm@suse.com \
    --cc=reiserfs-devel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.