All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rene Herman <rene.herman@keyaccess.nl>
To: Landis McGauhey <b3zdomny@hotmail.com>
Cc: alsa-user@lists.sourceforge.net, Takashi Iwai <tiwai@suse.de>,
	ALSA devel <alsa-devel@alsa-project.org>
Subject: Re: [Alsa-user] is this card supported by ALSA?
Date: Tue, 15 Jul 2008 02:11:41 +0200	[thread overview]
Message-ID: <487BEB3D.6000209@keyaccess.nl> (raw)
In-Reply-To: <loom.20080714T232812-533@post.gmane.org>

On 15-07-08 01:36, Landis McGauhey wrote:

It seems there's just a bit too much oddness going on. Takashi, you know 
more about ac97. Also bringing in alsa-devel...

> # cat /proc/asound/AudioPCI/codec97#0/ac97#0-0=
> 
> 0-0/0: 0x76058384 F�S

Eep? A 0x83847605 would be a SigmaTel STAC9704. And:

[ ... ]

> # cat /proc/asound/AudioPCI/codec97#0/ac97#0-0+regs=

[ ... ]

> 0:7c = 0000
> 0:7e = 8384

does't fit the above ID. Do we just have a crummy codec that needs delay 
between acceses somewhere or something?

Here full contents again:

> # cat /proc/asound/AudioPCI/codec97#0/ac97#0-0=
> 
> 0-0/0: 0x76058384 F�S
> 
> PCI Subsys Vendor: 0x0000
> PCI Subsys Device: 0x0000
> 
> Capabilities     : -dedicated MIC PCM IN channel- -bass & treble-
> DAC resolution   : 16-bit
> ADC resolution   : 20-bit
> 3D enhancement   : Reserved 29
> 
> Current setup
> Mic gain         : +0dB [+20dB]
> POP path         : post 3D
> Sim. stereo      : off
> 3D enhancement   : off
> Loudness         : on
> Mono output      : MIX
> Mic select       : Mic2
> ADC/DAC loopback : off
> 
> # cat /proc/asound/AudioPCI/codec97#0/ac97#0-0+regs=
> 
> 0:00 = 0000
> 0:02 = 0140
> 0:04 = 8909
> 0:06 = 8000
> 0:08 = 8009
> 0:0a = ffff
> 0:0c = 150b
> 0:0e = 801f
> 0:10 = 805f
> 0:12 = 9515
> 0:14 = 9212
> 0:16 = 9f1f
> 0:18 = 9f1f
> 0:1a = 9010
> 0:1c = 0000
> 0:1e = 0000
> 0:20 = 0000
> 0:22 = 0000
> 0:24 = 0000
> 0:26 = 0000
> 0:28 = 000f
> 0:2a = ffff
> 0:2c = ffff
> 0:2e = ffff
> 0:30 = ffff
> 0:32 = ffff
> 0:34 = ffff
> 0:36 = ffff
> 0:38 = ffff
> 0:3a = ffff
> 0:3c = ffff
> 0:3e = ffff
> 0:40 = ffff
> 0:42 = ffff
> 0:44 = ffff
> 0:46 = ffff
> 0:48 = ffff
> 0:4a = ffff
> 0:4c = ffff
> 0:4e = ffff
> 0:50 = ffff
> 0:52 = ffff
> 0:54 = ffff
> 0:56 = ffff
> 0:58 = ffff
> 0:5a = 0000
> 0:5c = 0000
> 0:5e = 0000
> 0:60 = 0000
> 0:62 = 0000
> 0:64 = 0000
> 0:66 = 0000
> 0:68 = 0000
> 0:6a = 0000
> 0:6c = 0000
> 0:6e = 0000
> 0:70 = 0000
> 0:72 = 0000
> 0:74 = 0000
> 0:76 = 0000
> 0:78 = 0000
> 0:7a = 0000
> 0:7c = 0000
> 0:7e = 8384

Rene.

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

       reply	other threads:[~2008-07-15  0:09 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <BLU137-W526424D3E9A79DA1437849959A0@phx.gbl>
     [not found] ` <48701633.7040601@keyaccess.nl>
     [not found]   ` <loom.20080708T141841-614@post.gmane.org>
     [not found]     ` <4873AB3B.1070403@keyaccess.nl>
     [not found]       ` <4873CED6.2040704@keyaccess.nl>
     [not found]         ` <4873D033.8010604@keyaccess.nl>
     [not found]           ` <BLU137-W434EEB6A014E95FD1E225C95910@phx.gbl>
     [not found]             ` <48769D84.1050102@keyaccess.nl>
     [not found]               ` <BLU137-W51DDE8E1756609BBE5CF7F95910@phx.gbl>
     [not found]                 ` <4876A0DE.2050803@keyaccess.nl>
     [not found]                   ` <BLU137-W23A4FF48E97AC32476FD6095900@phx.gbl>
     [not found]                     ` <4876AC75.2010305@keyaccess.nl>
     [not found]                       ` <BLU137-W541C318CC744C4BF6461DE95900@phx.gbl>
     [not found]                         ` <4876B329.80700@keyaccess.nl>
     [not found]                           ` <BLU137-W3234537335E7D553F03AF195900@phx.gbl>
     [not found]                             ` <48798CF7.6020303@keyaccess.nl>
     [not found]                               ` <loom.20080714T232812-533@post.gmane.org>
2008-07-15  0:11                                 ` Rene Herman [this message]
2008-07-15  4:12                                   ` is this card supported by ALSA? Landis McGauhey
2008-07-15 13:11                                   ` Takashi Iwai
2008-07-15 13:56                                     ` Landis McGauhey
2008-07-15 14:19                                     ` Takashi Iwai
2008-07-15 14:42                                       ` [Alsa-user] " Rene Herman
2008-07-15 14:52                                         ` Landis McGauhey
2008-07-15 14:59                                           ` Rene Herman
2008-07-15 15:01                                             ` Sergei Steshenko
2008-07-15 15:06                                               ` [Alsa-user] " Rene Herman
2008-07-15 15:25                                         ` Landis McGauhey
2008-07-15 15:36                                           ` [Alsa-user] " Rene Herman
2008-07-15 16:45                                             ` Landis McGauhey
2008-07-15 16:52                                               ` Rene Herman
2008-07-15 17:08                                                 ` Landis McGauhey
2008-07-15 15:38                                         ` Landis McGauhey
2008-07-15 17:02                                         ` [Alsa-user] " Rene Herman
2008-07-15 14:49                                       ` Landis McGauhey
2008-07-15 20:28 Landis McGauhey
2008-07-16  9:16 ` Rene Herman
2008-07-16 11:07   ` [Alsa-user] " Takashi Iwai
  -- strict thread matches above, loose matches on Subject: below --
2008-07-16 13:38 Landis McGauhey
2008-07-16 14:40 ` [Alsa-user] " Rene Herman
2008-07-16 14:44   ` Rene Herman
2008-07-16 14:52     ` Rene Herman
2008-07-16 18:00 Landis McGauhey
2008-07-16 18:50 ` Rene Herman
2008-07-18 16:31   ` Rene Herman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=487BEB3D.6000209@keyaccess.nl \
    --to=rene.herman@keyaccess.nl \
    --cc=alsa-devel@alsa-project.org \
    --cc=alsa-user@lists.sourceforge.net \
    --cc=b3zdomny@hotmail.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.