From: Brice Goglin <brice@myri.com>
To: Jeff Garzik <jeff@garzik.org>
Cc: netdev@vger.kernel.org
Subject: [PATCH 1/2] myri10ge: remove wcfifo
Date: Mon, 21 Jul 2008 10:25:50 +0200 [thread overview]
Message-ID: <4884480E.6080706@myri.com> (raw)
In-Reply-To: <488447E7.2060505@myri.com>
Remove the wcfifo since it never gave any performance improvement.
Signed-off-by: Brice Goglin <brice@myri.com>
---
drivers/net/myri10ge/myri10ge.c | 54 ++--------------------------------------
1 file changed, 3 insertions(+), 51 deletions(-)
Index: linux-2.6/drivers/net/myri10ge/myri10ge.c
===================================================================
--- linux-2.6.orig/drivers/net/myri10ge/myri10ge.c 2008-07-21 09:23:20.000000000 +0200
+++ linux-2.6/drivers/net/myri10ge/myri10ge.c 2008-07-21 09:24:21.000000000 +0200
@@ -125,7 +125,6 @@
struct myri10ge_rx_buf {
struct mcp_kreq_ether_recv __iomem *lanai; /* lanai ptr for recv ring */
- u8 __iomem *wc_fifo; /* w/c rx dma addr fifo address */
struct mcp_kreq_ether_recv *shadow; /* host shadow of recv ring */
struct myri10ge_rx_buffer_state *info;
struct page *page;
@@ -140,7 +139,6 @@
struct myri10ge_tx_buf {
struct mcp_kreq_ether_send __iomem *lanai; /* lanai ptr for sendq */
- u8 __iomem *wc_fifo; /* w/c send fifo address */
struct mcp_kreq_ether_send *req_list; /* host shadow of sendq */
char *req_bytes;
struct myri10ge_tx_buffer_state *info;
@@ -332,10 +330,6 @@
static int myri10ge_reset_recover = 1;
-static int myri10ge_wcfifo = 0;
-module_param(myri10ge_wcfifo, int, S_IRUGO);
-MODULE_PARM_DESC(myri10ge_wcfifo, "Enable WC Fifo when WC is enabled");
-
static int myri10ge_max_slices = 1;
module_param(myri10ge_max_slices, int, S_IRUGO);
MODULE_PARM_DESC(myri10ge_max_slices, "Max tx/rx queues");
@@ -1218,14 +1212,8 @@
/* copy 8 descriptors to the firmware at a time */
if ((idx & 7) == 7) {
- if (rx->wc_fifo == NULL)
- myri10ge_submit_8rx(&rx->lanai[idx - 7],
- &rx->shadow[idx - 7]);
- else {
- mb();
- myri10ge_pio_copy(rx->wc_fifo,
- &rx->shadow[idx - 7], 64);
- }
+ myri10ge_submit_8rx(&rx->lanai[idx - 7],
+ &rx->shadow[idx - 7]);
}
}
}
@@ -2229,18 +2217,6 @@
ss->rx_big.lanai = (struct mcp_kreq_ether_recv __iomem *)
(mgp->sram + cmd.data0);
- if (myri10ge_wcfifo && mgp->wc_enabled) {
- ss->tx.wc_fifo = (u8 __iomem *)
- mgp->sram + MXGEFW_ETH_SEND_4 + 64 * slice;
- ss->rx_small.wc_fifo = (u8 __iomem *)
- mgp->sram + MXGEFW_ETH_RECV_SMALL + 64 * slice;
- ss->rx_big.wc_fifo = (u8 __iomem *)
- mgp->sram + MXGEFW_ETH_RECV_BIG + 64 * slice;
- } else {
- ss->tx.wc_fifo = NULL;
- ss->rx_small.wc_fifo = NULL;
- ss->rx_big.wc_fifo = NULL;
- }
return status;
}
@@ -2573,27 +2549,6 @@
mb();
}
-static inline void
-myri10ge_submit_req_wc(struct myri10ge_tx_buf *tx,
- struct mcp_kreq_ether_send *src, int cnt)
-{
- tx->req += cnt;
- mb();
- while (cnt >= 4) {
- myri10ge_pio_copy(tx->wc_fifo, src, 64);
- mb();
- src += 4;
- cnt -= 4;
- }
- if (cnt > 0) {
- /* pad it to 64 bytes. The src is 64 bytes bigger than it
- * needs to be so that we don't overrun it */
- myri10ge_pio_copy(tx->wc_fifo + MXGEFW_ETH_SEND_OFFSET(cnt),
- src, 64);
- mb();
- }
-}
-
/*
* Transmit a packet. We need to split the packet so that a single
* segment does not cross myri10ge->tx_boundary, so this makes segment
@@ -2830,10 +2785,7 @@
MXGEFW_FLAGS_FIRST)));
idx = ((count - 1) + tx->req) & tx->mask;
tx->info[idx].last = 1;
- if (tx->wc_fifo == NULL)
- myri10ge_submit_req(tx, tx->req_list, count);
- else
- myri10ge_submit_req_wc(tx, tx->req_list, count);
+ myri10ge_submit_req(tx, tx->req_list, count);
tx->pkt_start++;
if ((avail - count) < MXGEFW_MAX_SEND_DESC) {
tx->stop_queue++;
next prev parent reply other threads:[~2008-07-21 8:26 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-21 8:25 [PATCH 0/2] myri10ge update for 2.6.27 Brice Goglin
2008-07-21 8:25 ` Brice Goglin [this message]
2008-07-21 8:26 ` [PATCH 2/2] myri10ge: use ioremap_wc Brice Goglin
2008-07-22 20:09 ` Jeff Garzik
2008-08-10 11:25 ` Martin Michlmayr
2008-08-10 11:59 ` Brice Goglin
2008-08-10 12:38 ` Martin Michlmayr
2008-08-11 9:09 ` Russell King - ARM Linux
2008-08-12 9:14 ` Martin Michlmayr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4884480E.6080706@myri.com \
--to=brice@myri.com \
--cc=jeff@garzik.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.