All of lore.kernel.org
 help / color / mirror / Atom feed
From: Boaz Harrosh <bharrosh@panasas.com>
To: Benny Halevy <bhalevy@panasas.com>,
	James Bottomley <James.Bottomley@HansenPartnership.com>,
	Mike Christie <michaelc@cs.wisc.edu>, Pete Wyckoff <pw@osc.edu>,
	Christoph Hellwig <hch@i>
Subject: [RFC 03/14] osd_uld: OSD scsi ULD
Date: Thu, 24 Jul 2008 20:47:15 +0300	[thread overview]
Message-ID: <4888C023.7070105@panasas.com> (raw)
In-Reply-To: <4888BC3B.1050406@panasas.com>


Add a Linux driver module that registers as a SCSI ULD and probes for OSD type
SCSI devices.

When an OSD-type SCSI device is found a character device is created in the form
of /dev/osdX - where X goes from 0 up to hard coded 64.
The Major character device number used is *232*, which is free (as of Linux
v2.6.27). The same Major was used by the old IBM initiator project.

TODO: How to dynamically allocate a Major and have a /dev/osdX entry linked
to it? Do I need/should reserve the minor range in advance, if not how?

A single ioctl is currently supported that will invoke an in-kernel test on
the specified OSD device (lun).

osd_test: Also included is the bare bones user-mode program - osd_test - that
will open a given osd device and issue the test ioctl to kernel.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Reviewed-by: Benny Halevy <bhalevy@panasas.com>
---
 drivers/scsi/osd/Makefile     |   10 ++
 drivers/scsi/osd/osd_ktests.h |   31 ++++
 drivers/scsi/osd/osd_test.c   |   74 +++++++++
 drivers/scsi/osd/osd_uld.c    |  331 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 446 insertions(+), 0 deletions(-)
 create mode 100644 drivers/scsi/osd/osd_ktests.h
 create mode 100644 drivers/scsi/osd/osd_test.c
 create mode 100644 drivers/scsi/osd/osd_uld.c

diff --git a/drivers/scsi/osd/Makefile b/drivers/scsi/osd/Makefile
index 8ff2283..f89135d 100755
--- a/drivers/scsi/osd/Makefile
+++ b/drivers/scsi/osd/Makefile
@@ -22,6 +22,13 @@ endif
 libosd-objs := osd_initiator.o
 obj-$(CONFIG_SCSI_OSD_INITIATOR) += libosd.o
 
+# osd.ko - SCSI ULD and char-device for testing
+ifeq ($(in_tree),0)
+CONFIG_SCSI_OSD_ULD=m
+endif
+osd-objs := osd_uld.o
+obj-$(CONFIG_SCSI_OSD_ULD) += osd.o
+
 # Everything beyond this point is used to call the kernel Makefile in case of
 # an out-of-tree build
 
@@ -42,3 +49,6 @@ all:
 
 clean:
 	$(KBUILD_BASE) in_tree=0 clean
+
+osd_test: osd_test.o
+	$(CC) -o $@ $<
diff --git a/drivers/scsi/osd/osd_ktests.h b/drivers/scsi/osd/osd_ktests.h
new file mode 100644
index 0000000..b57ca86
--- /dev/null
+++ b/drivers/scsi/osd/osd_ktests.h
@@ -0,0 +1,31 @@
+/*
+ * osd_ktests.h - Define the ktests.c API
+ *
+ * Copyright (C) 2008 Panasas Inc.  All rights reserved.
+ *
+ * Authors:
+ *   Boaz Harrosh <bharrosh@panasas.com>
+ *   Benny Halevy <bhalevy@panasas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ *
+ */
+#ifndef __OSD_KTESTS_H__
+#define __OSD_KTESTS_H__
+
+/* Tests from osd_ktests.c */
+/* TODO: Only one simple test for now. Later I will add a test definition
+ *	structure that will define what tests to preform and with some
+ *	parametrization, so concurrent tests could be run on same OSD lun
+ *	without stepping on each other. (E.g. Format called when other tests
+ *	are in progress)
+ */
+
+enum { OSD_TEST_ALL = 17 };
+
+#ifdef __KERNEL__
+extern int do_test_17(struct scsi_device *osd_dev);
+#endif /* __KERNEL__ */
+
+#endif /*ndef __OSD_KTESTS_H__*/
diff --git a/drivers/scsi/osd/osd_test.c b/drivers/scsi/osd/osd_test.c
new file mode 100644
index 0000000..dc74865
--- /dev/null
+++ b/drivers/scsi/osd/osd_test.c
@@ -0,0 +1,74 @@
+/*
+ * osd_test.c - A user-mode program that calls into the osd ULD
+ *
+ * Copyright (C) 2008 Panasas Inc.  All rights reserved.
+ *
+ * Authors:
+ *   Boaz Harrosh <bharrosh@panasas.com>
+ *   Benny Halevy <bhalevy@panasas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *  3. Neither the name of the Panasas company nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <sys/ioctl.h>
+#include <fcntl.h>
+
+#include "osd_ktests.h"
+
+void usage(void)
+{
+	printf("usage: osd_test /dev/osdX testNo\n");
+}
+
+int main(int argc, char *argv[])
+{
+	int osd_file, ret;
+
+	if (argc <= 1) {
+		usage();
+		return -2;
+	}
+
+	osd_file = open(argv[1], O_RDWR);
+	if (osd_file < 0) {
+		printf("Error opening <%s>\n", argv[1]);
+		return -3;
+	}
+
+	ret = ioctl(osd_file, OSD_TEST_ALL, 0);
+	if (ret) {
+		printf("ioctl 17 returned %d\n", ret);
+		return ret;
+	}
+
+	close(osd_file);
+	return 0;
+}
diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c
new file mode 100644
index 0000000..37797d4
--- /dev/null
+++ b/drivers/scsi/osd/osd_uld.c
@@ -0,0 +1,331 @@
+/*
+ * osd_uld.c - OSD Upper Layer Driver
+ *
+ * A Linux driver module that registers as a SCSI ULD and probes
+ * for OSD type SCSI devices.
+ * Currently only used for tests. Does not export any useful
+ * user-mode API.
+ *
+ * Copyright (C) 2008 Panasas Inc.  All rights reserved.
+ *
+ * Authors:
+ *   Boaz Harrosh <bharrosh@panasas.com>
+ *   Benny Halevy <bhalevy@panasas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *  3. Neither the name of the Panasas company nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/idr.h>
+
+/* FIXME: #include <scsi/scsi.h> move below to scsi.h when
+ * submitting upstream
+ */
+#define TYPE_OSD            0x11
+
+#include <scsi/scsi_driver.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_ioctl.h>
+
+/* FIXME: #include <linux/major.h> move below to major.h when
+ * submitting upstream
+ */
+#define SCSI_OSD_MAJOR 232
+#define SCSI_OSD_MAX_MINOR 64
+
+#include "osd_ktests.h"
+#include "osd_debug.h"
+
+static const char osd_name[] = "osd";
+static const char *osd_version_string = "open-osd 0.0.6";
+const char osd_symlink[] = "scsi_osd";
+
+MODULE_AUTHOR("Boaz Harrosh <bharrosh@panasas.com>");
+MODULE_DESCRIPTION("open-osd Upper-Layer-Driver osd.ko");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(SCSI_OSD_MAJOR);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_OSD);
+
+/*
+ * Device operations
+ */
+
+struct osd_uld_device {
+	int minor;
+	struct cdev cdev;
+	struct scsi_device *scsi_dev;
+	struct gendisk *disk;
+	struct device *class_member;
+};
+
+static int osd_uld_open(struct inode *inode, struct file *file)
+{
+	struct osd_uld_device *osd_dev = container_of(inode->i_cdev,
+					struct osd_uld_device, cdev);
+
+	/* cache osd_dev on file handle */
+	file->private_data = osd_dev;
+	OSD_DEBUG("osd_uld_open %p\n", osd_dev);
+	return 0;
+}
+
+static int osd_uld_release(struct inode *inode, struct file *file)
+{
+	OSD_DEBUG("osd_uld_release %p\n", file->private_data);
+	file->private_data = NULL;
+	return 0;
+}
+
+static long osd_uld_ioctl(struct file *file, unsigned int cmd,
+	unsigned long arg)
+{
+	struct osd_uld_device *osd_dev = file->private_data;
+	int ret;
+
+	switch (cmd) {
+	case OSD_TEST_ALL:
+		OSD_DEBUG("Kernel test %d: osd_dev=%p\n", cmd, osd_dev);
+		/* TODO: Add some tests code here */
+		ret = 0;
+		break;
+	default:
+		OSD_ERR("Unknown osd_uld_ioctl %d\n", cmd);
+		ret = -ENOIOCTLCMD;
+	}
+	return ret;
+}
+
+/*
+ * Driver operation
+ */
+
+static const struct file_operations osd_fops = {
+	.owner          = THIS_MODULE,
+	.open           = osd_uld_open,
+	.release        = osd_uld_release,
+	.unlocked_ioctl = osd_uld_ioctl,
+};
+
+static struct class *osd_sysfs_class;
+static DEFINE_IDA(osd_minor_ida);
+
+static int osd_probe(struct device *dev)
+{
+	struct scsi_device *scsi_dev = to_scsi_device(dev);
+	struct gendisk *disk;
+	struct osd_uld_device *osd_dev;
+	int minor;
+	int error;
+
+	if (scsi_dev->type != TYPE_OSD)
+		return -ENODEV;
+
+	do {
+		if (!ida_pre_get(&osd_minor_ida, GFP_KERNEL))
+			return -ENODEV;
+
+		error = ida_get_new(&osd_minor_ida, &minor);
+	} while (error == -EAGAIN);
+
+	if (error)
+		return error;
+	if (minor >= SCSI_OSD_MAX_MINOR) {
+		error = -EBUSY;
+		goto err_retract_minor;
+	}
+
+	error = -ENOMEM;
+	osd_dev = kzalloc(sizeof(*osd_dev), GFP_KERNEL);
+	if (NULL == osd_dev)
+		goto err_retract_minor;
+
+	dev_set_drvdata(dev, osd_dev);
+	osd_dev->minor = minor;
+	osd_dev->scsi_dev = scsi_dev;
+
+	/* allocate a disk and set it up */
+	/* FIXME: do we need this since sg has already done that */
+	disk = alloc_disk(1);
+	if (!disk) {
+		OSD_ERR("alloc_disk failed\n");
+		goto err_free_osd;
+	}
+	disk->major = SCSI_OSD_MAJOR;
+	disk->first_minor = osd_dev->minor;
+	sprintf(disk->disk_name, "osd%d", osd_dev->minor);
+	osd_dev->disk = disk;
+
+	OSD_DEBUG("start SCSI_IOCTL_TEST_UNIT_READY %p %p %p\n",
+			osd_dev, scsi_dev, scsi_dev->request_queue);
+
+	/* FIXME: this should go away eventually */
+	error = scsi_test_unit_ready(scsi_dev, 10*HZ, 5, NULL);
+	if (error)
+		OSD_ERR("warning: scsi_test_unit_ready failed\n");
+
+	/* init the char-device for communication with user-mode */
+	cdev_init(&osd_dev->cdev, &osd_fops);
+	osd_dev->cdev.owner = THIS_MODULE;
+	error = cdev_add(&osd_dev->cdev,
+			 MKDEV(SCSI_OSD_MAJOR, osd_dev->minor), 1);
+	if (error) {
+		OSD_ERR("cdev_add failed\n");
+		goto err_put_disk;
+	}
+
+	/* class_member */
+	osd_dev->class_member = device_create(osd_sysfs_class, dev,
+		MKDEV(SCSI_OSD_MAJOR, osd_dev->minor), "%s", disk->disk_name);
+	if (IS_ERR(osd_dev->class_member)) {
+		OSD_ERR("class_device_create failed\n");
+		error = PTR_ERR(osd_dev->class_member);
+		goto err_put_cdev;
+	}
+
+	dev_set_drvdata(osd_dev->class_member, osd_dev);
+	error = sysfs_create_link(&scsi_dev->sdev_gendev.kobj,
+				  &osd_dev->class_member->kobj, osd_symlink);
+	if (error)
+		OSD_ERR("warning: unable to make symlink\n");
+
+	OSD_INFO("osd_probe %s\n", disk->disk_name);
+	return 0;
+
+err_put_cdev:
+	cdev_del(&osd_dev->cdev);
+err_put_disk:
+	put_disk(disk);
+err_free_osd:
+	dev_set_drvdata(dev, NULL);
+	kfree(osd_dev);
+	scsi_device_put(scsi_dev);
+err_retract_minor:
+	ida_remove(&osd_minor_ida, minor);
+	return error;
+}
+
+static int osd_remove(struct device *dev)
+{
+	struct scsi_device *scsi_dev = to_scsi_device(dev);
+	struct osd_uld_device *osd_dev = dev_get_drvdata(dev);
+
+	if (!osd_dev || (osd_dev->scsi_dev != scsi_dev)) {
+		OSD_ERR("Half cooked osd-device %p,%p || %p!=%p",
+			dev, osd_dev, osd_dev ? osd_dev->scsi_dev : NULL,
+			scsi_dev);
+	}
+
+	OSD_INFO("osd_remove %s\n",
+		 osd_dev->disk ? osd_dev->disk->disk_name : NULL);
+
+	sysfs_remove_link(&scsi_dev->sdev_gendev.kobj, osd_symlink);
+
+	if (osd_dev->class_member)
+		device_destroy(osd_sysfs_class,
+			       MKDEV(SCSI_OSD_MAJOR, osd_dev->minor));
+	if (osd_dev->cdev.owner)
+		cdev_del(&osd_dev->cdev);
+	if (osd_dev->disk)
+		put_disk(osd_dev->disk);
+
+	ida_remove(&osd_minor_ida, osd_dev->minor);
+	kfree(osd_dev);
+	return 0;
+}
+
+/*
+ * Global driver registration
+ */
+static struct scsi_driver osd_driver = {
+	.owner			= THIS_MODULE,
+	.gendrv = {
+		.name		= osd_name,
+		.probe		= osd_probe,
+		.remove		= osd_remove,
+	}
+};
+
+static int __init osd_uld_init(void)
+{
+	int err;
+
+	osd_sysfs_class = class_create(THIS_MODULE, osd_symlink);
+	if (IS_ERR(osd_sysfs_class)) {
+		OSD_ERR("Unable to register sysfs class => %ld\n",
+			PTR_ERR(osd_sysfs_class));
+		return PTR_ERR(osd_sysfs_class);
+	}
+
+	err = register_chrdev_region(MKDEV(SCSI_OSD_MAJOR, 0),
+				     SCSI_OSD_MAX_MINOR, osd_name);
+	if (err) {
+		OSD_ERR("Unable to register major %d for osd ULD => %d\n",
+			SCSI_OSD_MAJOR, err);
+		goto err_out;
+	}
+
+	err = scsi_register_driver(&osd_driver.gendrv);
+	if (err) {
+		OSD_ERR("scsi_register_driver failed => %d\n", err);
+		goto err_out_chrdev;
+	}
+
+/* TODO: Add osd_specific sysfs nodes here
+	err = osd_create_sysfs_files(&osd_driver.gendrv);
+	if (err)
+		goto err_out_scsidrv; */
+
+	OSD_INFO("LOADED %s\n", osd_version_string);
+	return 0;
+
+/* err_out_scsidrv:
+	scsi_unregister_driver(&osd_driver.gendrv); */
+err_out_chrdev:
+	unregister_chrdev_region(MKDEV(SCSI_OSD_MAJOR, 0), SCSI_OSD_MAX_MINOR);
+err_out:
+	class_destroy(osd_sysfs_class);
+	return err;
+}
+
+static void __exit osd_uld_exit(void)
+{
+/*	TODO: Remove osd_specific sysfs nodes
+	osd_remove_sysfs_files(&osd_driver.gendrv);*/
+
+	scsi_unregister_driver(&osd_driver.gendrv);
+	unregister_chrdev_region(MKDEV(SCSI_OSD_MAJOR, 0), SCSI_OSD_MAX_MINOR);
+	class_destroy(osd_sysfs_class);
+	OSD_INFO("UNLOADED %s\n", osd_version_string);
+}
+
+module_init(osd_uld_init);
+module_exit(osd_uld_exit);
-- 
1.5.6.rc1.5.gadf6



  parent reply	other threads:[~2008-07-24 17:47 UTC|newest]

Thread overview: 183+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <48876009.8010701@panasas.com>
2008-07-24 17:30 ` [RFC 00/14] open-osd: OSD Initiator library for Linux Boaz Harrosh
2008-07-24 17:40   ` [RFC 01/14] libosd: OSDv1 Headers Boaz Harrosh
2008-07-24 17:45   ` [RFC 02/14] libosd: OSDv1 preliminary implementation Boaz Harrosh
2008-07-24 17:47   ` Boaz Harrosh [this message]
2008-07-27 21:16     ` [RFC 03/14] osd_uld: OSD scsi ULD James Bottomley
2008-08-06 17:25       ` Boaz Harrosh
2008-07-24 17:49   ` [RFC 04/14] osd_ktests: Add basic OSD tests Boaz Harrosh
2008-07-24 17:51   ` [RFC 05/14] libosd: attributes Support Boaz Harrosh
2008-07-24 17:53   ` [RFC 06/14] osd_ktests: Test Attribute lists Boaz Harrosh
2008-07-24 17:54   ` [RFC 07/14] libosd: OSD Security processing stubs Boaz Harrosh
2008-07-24 17:55   ` [RFC 08/14] libosd: Add Flush and List-objects support Boaz Harrosh
2008-07-24 17:57   ` [RFC 09/14] libosd: Not implemented commands Boaz Harrosh
2008-07-24 17:58   ` [RFC 10/14] libosd: OSD version 2 Support Boaz Harrosh
2008-07-24 17:59   ` [RFC 11/14] osd_ktests: OSDv2 auto detection Boaz Harrosh
2008-07-24 18:00   ` [RFC 12/14] osd: Kconfig file for in-tree builds Boaz Harrosh
2008-07-24 18:02   ` [RFC 13/14] osd: Documentation for OSD library Boaz Harrosh
2008-07-24 18:03   ` [RFC 14/14] scsi: Add osd library to build system Boaz Harrosh
2008-11-04 16:09 ` [PATCHSET 00/18] open-osd: OSD Initiator library for Linux Boaz Harrosh
2008-11-04 16:09   ` Boaz Harrosh
2008-11-04 16:17   ` [PATCH 01/18] major.h: char-major number for OSD device driver Boaz Harrosh
2008-11-04 16:17     ` Boaz Harrosh
2008-11-26 17:33     ` [osd-dev] " Boaz Harrosh
2008-11-26 18:07       ` Randy Dunlap
2008-11-26 18:07         ` Randy Dunlap
2008-11-04 16:42   ` [PATCH 02/18] scsi: OSD_TYPE Boaz Harrosh
2008-11-04 16:42   ` Boaz Harrosh
2008-11-04 16:44   ` [PATCH 03/18] libosd: OSDv1 Headers Boaz Harrosh
2008-11-04 16:44     ` Boaz Harrosh
2008-11-04 19:10     ` Andrew Morton
2008-11-04 19:42       ` Jörn Engel
2008-11-04 19:42         ` Jörn Engel
2008-11-04 20:29         ` Jörn Engel
2008-11-05 13:00         ` Boaz Harrosh
2008-11-05 13:00           ` Boaz Harrosh
2008-11-05 12:54       ` Boaz Harrosh
2008-11-05 12:54         ` Boaz Harrosh
2008-11-05 13:09         ` James Bottomley
2008-11-05 13:29           ` Boaz Harrosh
2008-11-09 14:52     ` [PATCH 03/18 ver2] " Boaz Harrosh
2008-11-09 14:52       ` Boaz Harrosh
2008-11-09 17:45       ` Jörn Engel
2008-11-09 17:45         ` Jörn Engel
2008-11-10  8:47         ` Boaz Harrosh
2008-11-10  8:47           ` Boaz Harrosh
2008-11-10 15:17           ` Jörn Engel
2008-11-10 15:17             ` Jörn Engel
2008-11-10 17:29       ` Randy Dunlap
2008-11-12 13:10         ` Boaz Harrosh
2008-11-12 13:10           ` Boaz Harrosh
2008-11-12 16:48           ` Randy Dunlap
2008-11-12 17:09             ` Boaz Harrosh
2008-11-12 17:15             ` Johannes Berg
2008-11-12 13:13         ` [PATCH 03/18 ver3] " Boaz Harrosh
2008-11-12 13:13           ` Boaz Harrosh
2008-11-12 18:59           ` Randy Dunlap
2008-11-13  9:38             ` Boaz Harrosh
2008-11-13 12:25             ` [PATCH 03/18 ver4] " Boaz Harrosh
2008-11-13 12:25               ` Boaz Harrosh
2008-11-13 18:16               ` Randy Dunlap
2008-11-13 15:41                 ` [osd-dev] " Benny Halevy
2008-11-04 16:44   ` [PATCH 04/18] libosd: OSDv1 preliminary implementation Boaz Harrosh
2008-11-04 16:44   ` Boaz Harrosh
2008-11-04 18:03     ` Sam Ravnborg
2008-11-05 13:12       ` Boaz Harrosh
2008-11-09 14:55         ` [osd-dev] " Boaz Harrosh
2008-11-10  5:37           ` Randy Dunlap
2008-11-10  9:00             ` Boaz Harrosh
2008-11-05 16:39       ` [Patch] Always include <linux/types.h> Jörn Engel
2008-11-05 17:23         ` Alexey Dobriyan
2008-11-05 19:16           ` Jörn Engel
2008-11-05 19:48             ` Andreas Schwab
2008-11-05 20:02             ` Jörn Engel
2008-11-05 20:32               ` Alexey Dobriyan
2008-11-07  8:02                 ` Jörn Engel
2008-11-05 20:20             ` Alexey Dobriyan
2008-11-05 17:48         ` Boaz Harrosh
2008-11-04 19:16     ` [PATCH 04/18] libosd: OSDv1 preliminary implementation Andrew Morton
2008-11-05 13:44       ` Boaz Harrosh
2008-11-09 14:50     ` [PATCH 04/18 ver2] " Boaz Harrosh
2008-11-04 16:44   ` [PATCH 05/18] osd_uld: OSD scsi ULD Boaz Harrosh
2008-11-04 16:44     ` Boaz Harrosh
2008-11-04 16:44   ` [PATCH 06/18] osd_uld: API for retrieving osd devices from Kernel Boaz Harrosh
2008-11-04 16:44     ` Boaz Harrosh
2008-11-04 16:44   ` [PATCH 07/18] osd_test: User-mode application to run the OSD tests Boaz Harrosh
2008-11-04 16:44     ` Boaz Harrosh
2008-11-04 16:44   ` [PATCH 08/18] osd_ktests: Add basic " Boaz Harrosh
2008-11-04 16:44     ` Boaz Harrosh
2008-11-04 16:44   ` [PATCH 09/18] libosd: attributes Support Boaz Harrosh
2008-11-04 16:44     ` Boaz Harrosh
2008-11-04 16:44   ` [PATCH 10/18] osd_ktests: Test Attribute lists Boaz Harrosh
2008-11-04 16:44     ` Boaz Harrosh
2008-11-04 16:44   ` [PATCH 11/18] libosd: OSD Security processing stubs Boaz Harrosh
2008-11-04 16:44     ` Boaz Harrosh
2008-11-04 16:44   ` [PATCH 12/18] libosd: Add Flush and List-objects support Boaz Harrosh
2008-11-04 16:44     ` Boaz Harrosh
2008-11-04 16:44   ` [PATCH 13/18] libosd: Not implemented commands Boaz Harrosh
2008-11-04 16:44     ` Boaz Harrosh
2008-11-04 16:44   ` [PATCH 14/18] libosd: OSD version 2 Support Boaz Harrosh
2008-11-04 16:44     ` Boaz Harrosh
2008-11-04 16:44   ` [PATCH 15/18] libosd: OSDv2 auto detection Boaz Harrosh
2008-11-04 16:44     ` Boaz Harrosh
2008-11-04 16:44   ` [PATCH 16/18] osd: Documentation for OSD library Boaz Harrosh
2008-11-04 16:44     ` Boaz Harrosh
2008-11-04 16:44   ` [PATCH 17/18] osd: Kconfig file for in-tree builds Boaz Harrosh
2008-11-04 16:44     ` Boaz Harrosh
2008-11-04 16:44   ` [PATCH 18/18] scsi: Add osd library to build system Boaz Harrosh
2008-11-04 16:44     ` Boaz Harrosh
2008-11-04 19:19   ` [PATCHSET 00/18] open-osd: OSD Initiator library for Linux Andrew Morton
2008-11-05 13:56     ` Boaz Harrosh
2008-11-09 14:58     ` Boaz Harrosh
2008-11-09 23:26       ` Stephen Rothwell
2008-11-10 12:52         ` Boaz Harrosh
2008-11-10 13:04           ` Stephen Rothwell
2008-12-22 12:32 ` Boaz Harrosh
2008-12-22 12:32   ` Boaz Harrosh
2008-12-22 12:37   ` [PATCH 01/18] major.h: char-major number for OSD device driver Boaz Harrosh
2008-12-22 12:37     ` Boaz Harrosh
2008-12-22 12:39   ` [PATCH 02/18] scsi: OSD_TYPE Boaz Harrosh
2008-12-22 12:39     ` Boaz Harrosh
2008-12-22 12:41   ` [PATCH 03/18] libosd: OSDv1 Headers Boaz Harrosh
2008-12-22 12:41     ` Boaz Harrosh
2008-12-22 12:43   ` [PATCH 04/18] libosd: OSDv1 preliminary implementation Boaz Harrosh
2008-12-22 12:43     ` Boaz Harrosh
2008-12-22 12:46   ` [PATCH 05/18] osd_uld: OSD scsi ULD Boaz Harrosh
2008-12-22 12:46     ` Boaz Harrosh
2008-12-22 12:49   ` [PATCH 06/18] osd_uld: API for retrieving osd devices from Kernel Boaz Harrosh
2008-12-22 12:49     ` Boaz Harrosh
2008-12-22 12:51   ` [PATCH 07/18] osd_ktests: Add basic OSD tests Boaz Harrosh
2008-12-22 12:51     ` Boaz Harrosh
2008-12-22 12:55   ` [PATCH 08/18] libosd: attributes Support Boaz Harrosh
2008-12-22 12:55     ` Boaz Harrosh
2008-12-22 12:57   ` [PATCH 09/18] osd_ktests: Test Attribute lists Boaz Harrosh
2008-12-22 12:57     ` Boaz Harrosh
2008-12-22 13:00   ` [PATCH 10/18] libosd: OSD Security processing stubs Boaz Harrosh
2008-12-22 13:00     ` Boaz Harrosh
2008-12-22 13:02   ` [PATCH 11/18] libosd: Add Flush and List-objects support Boaz Harrosh
2008-12-22 13:02     ` Boaz Harrosh
2008-12-22 13:04   ` [PATCH 12/18] libosd: Not implemented commands Boaz Harrosh
2008-12-22 13:04     ` Boaz Harrosh
2008-12-22 13:07   ` [PATCH 13/18] libosd: OSD version 2 Support Boaz Harrosh
2008-12-22 13:07     ` Boaz Harrosh
2008-12-22 13:09   ` [PATCH 14/18] libosd: OSDv2 auto detection Boaz Harrosh
2008-12-22 13:09     ` Boaz Harrosh
2008-12-22 13:13   ` [PATCH 15/18] libosd: SCSI/OSD Sense decoding support Boaz Harrosh
2008-12-22 13:13     ` Boaz Harrosh
2008-12-22 13:16   ` [PATCH 16/18] osd: Documentation for OSD library Boaz Harrosh
2008-12-22 13:16     ` Boaz Harrosh
2008-12-22 13:18   ` [PATCH 17/18] osd: Kconfig file for in-tree builds Boaz Harrosh
2008-12-22 13:18     ` Boaz Harrosh
2008-12-22 13:20   ` [PATCH 18/18] scsi: Add osd library to build system Boaz Harrosh
2008-12-22 13:20     ` Boaz Harrosh
2009-01-06 14:04 ` [PATCHSET 00/18] open-osd: OSD Initiator library for 2.6.29 Boaz Harrosh
2009-01-06 14:07   ` [PATCH 01/18] major.h: char-major number for OSD device driver Boaz Harrosh
2009-01-06 14:10   ` [PATCH 02/18] scsi: OSD_TYPE Boaz Harrosh
2009-01-06 14:11   ` [PATCH 03/18] libosd: OSDv1 Headers Boaz Harrosh
2009-01-06 14:13   ` [PATCH 04/18] libosd: OSDv1 preliminary implementation Boaz Harrosh
2009-01-06 14:14   ` [PATCH 05/18] osd_uld: OSD scsi ULD Boaz Harrosh
2009-01-06 16:47     ` [PATCH ver2 05/16] " Boaz Harrosh
2009-01-06 14:16   ` [PATCH 06/18] osd_uld: API for retrieving osd devices from Kernel Boaz Harrosh
2009-01-06 14:17   ` [PATCH 07/18] osd_ktests: Add basic OSD tests Boaz Harrosh
2009-01-06 14:42     ` FUJITA Tomonori
2009-01-06 14:56       ` Boaz Harrosh
2009-01-06 15:12         ` FUJITA Tomonori
2009-01-06 15:49           ` Boaz Harrosh
2009-01-06 16:58             ` FUJITA Tomonori
2009-01-06 17:04               ` Boaz Harrosh
2009-01-06 16:49     ` Boaz Harrosh
2009-01-06 14:19   ` [PATCH 08/18] libosd: attributes Support Boaz Harrosh
2009-01-06 14:20   ` [PATCH 09/18] osd_ktests: Test Attribute lists Boaz Harrosh
2009-01-06 16:50     ` Boaz Harrosh
2009-01-06 14:21   ` [PATCH 10/18] libosd: OSD Security processing stubs Boaz Harrosh
2009-01-06 14:23   ` [PATCH 11/18] libosd: Add Flush and List-objects support Boaz Harrosh
2009-01-06 14:24   ` [PATCH 12/18] libosd: Not implemented commands Boaz Harrosh
2009-01-06 14:25   ` [PATCH 13/18] libosd: OSD version 2 Support Boaz Harrosh
2009-01-06 14:27   ` [PATCH 14/18] libosd: OSDv2 auto detection Boaz Harrosh
2009-01-06 14:29   ` [PATCH 15/18] libosd: SCSI/OSD Sense decoding support Boaz Harrosh
2009-01-06 14:31   ` [PATCH 16/18] osd: Documentation for OSD library Boaz Harrosh
2009-01-06 14:32   ` [PATCH 17/18] osd: Kconfig file for in-tree builds Boaz Harrosh
2009-01-06 17:40     ` Randy Dunlap
2009-01-07  8:48       ` Boaz Harrosh
2009-01-07 17:10         ` Randy Dunlap
2009-01-07  8:53       ` [PATCH ver2 15/16] " Boaz Harrosh
2009-01-06 14:34   ` [PATCH 18/18] scsi: Add osd library to build system Boaz Harrosh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4888C023.7070105@panasas.com \
    --to=bharrosh@panasas.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=bhalevy@panasas.com \
    --cc=hch@i \
    --cc=michaelc@cs.wisc.edu \
    --cc=pw@osc.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.