From: Jeremy Fitzhardinge <jeremy@goop.org>
To: Ingo Molnar <mingo@elte.hu>
Cc: Sam Ravnborg <sam@ravnborg.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
"Alex Nixon (Intern)" <Alex.Nixon@eu.citrix.com>,
Eduardo Habkost <ehabkost@redhat.com>
Subject: [PATCH] xen: xen: compile irq functions without -pg for ftrace
Date: Mon, 28 Jul 2008 11:53:57 -0700 [thread overview]
Message-ID: <488E15C5.3070902@goop.org> (raw)
For some reason I managed to miss a bunch of irq-related functions
which also need to be compiled without -pg when using ftrace. This
patch moves them into their own file, and starts a cleanup process
I've been meaning to do anyway.
[ Sam, Ingo: I think the problem was that I enabled CONFIG_FTRACE
but didn't do a clean build. Shouldn't the build-system notice
that the config changes the CFLAGS and rebuild everything? That
didn't seem to happen in this case. ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
arch/x86/kernel/ldt.c | 2
arch/x86/xen/Makefile | 3
arch/x86/xen/enlighten.c | 122 --------------------------------------
arch/x86/xen/irq.c | 143 +++++++++++++++++++++++++++++++++++++++++++++
arch/x86/xen/xen-asm_32.S | 2
arch/x86/xen/xen-asm_64.S | 2
arch/x86/xen/xen-ops.h | 1
drivers/xen/events.c | 11 ---
8 files changed, 152 insertions(+), 134 deletions(-)
===================================================================
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -2,9 +2,10 @@
# Do not profile debug and lowlevel utilities
CFLAGS_REMOVE_spinlock.o = -pg
CFLAGS_REMOVE_time.o = -pg
+CFLAGS_REMOVE_irq.o = -pg
endif
-obj-y := enlighten.o setup.o multicalls.o mmu.o \
+obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \
time.o xen-asm_$(BITS).o grant-table.o suspend.o
obj-$(CONFIG_SMP) += smp.o spinlock.o
===================================================================
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -30,7 +30,6 @@
#include <xen/interface/xen.h>
#include <xen/interface/physdev.h>
#include <xen/interface/vcpu.h>
-#include <xen/interface/sched.h>
#include <xen/features.h>
#include <xen/page.h>
#include <xen/hvc-console.h>
@@ -293,94 +292,6 @@
static unsigned long xen_get_debugreg(int reg)
{
return HYPERVISOR_get_debugreg(reg);
-}
-
-static unsigned long xen_save_fl(void)
-{
- struct vcpu_info *vcpu;
- unsigned long flags;
-
- vcpu = x86_read_percpu(xen_vcpu);
-
- /* flag has opposite sense of mask */
- flags = !vcpu->evtchn_upcall_mask;
-
- /* convert to IF type flag
- -0 -> 0x00000000
- -1 -> 0xffffffff
- */
- return (-flags) & X86_EFLAGS_IF;
-}
-
-static void xen_restore_fl(unsigned long flags)
-{
- struct vcpu_info *vcpu;
-
- /* convert from IF type flag */
- flags = !(flags & X86_EFLAGS_IF);
-
- /* There's a one instruction preempt window here. We need to
- make sure we're don't switch CPUs between getting the vcpu
- pointer and updating the mask. */
- preempt_disable();
- vcpu = x86_read_percpu(xen_vcpu);
- vcpu->evtchn_upcall_mask = flags;
- preempt_enable_no_resched();
-
- /* Doesn't matter if we get preempted here, because any
- pending event will get dealt with anyway. */
-
- if (flags == 0) {
- preempt_check_resched();
- barrier(); /* unmask then check (avoid races) */
- if (unlikely(vcpu->evtchn_upcall_pending))
- force_evtchn_callback();
- }
-}
-
-static void xen_irq_disable(void)
-{
- /* There's a one instruction preempt window here. We need to
- make sure we're don't switch CPUs between getting the vcpu
- pointer and updating the mask. */
- preempt_disable();
- x86_read_percpu(xen_vcpu)->evtchn_upcall_mask = 1;
- preempt_enable_no_resched();
-}
-
-static void xen_irq_enable(void)
-{
- struct vcpu_info *vcpu;
-
- /* We don't need to worry about being preempted here, since
- either a) interrupts are disabled, so no preemption, or b)
- the caller is confused and is trying to re-enable interrupts
- on an indeterminate processor. */
-
- vcpu = x86_read_percpu(xen_vcpu);
- vcpu->evtchn_upcall_mask = 0;
-
- /* Doesn't matter if we get preempted here, because any
- pending event will get dealt with anyway. */
-
- barrier(); /* unmask then check (avoid races) */
- if (unlikely(vcpu->evtchn_upcall_pending))
- force_evtchn_callback();
-}
-
-static void xen_safe_halt(void)
-{
- /* Blocking includes an implicit local_irq_enable(). */
- if (HYPERVISOR_sched_op(SCHEDOP_block, NULL) != 0)
- BUG();
-}
-
-static void xen_halt(void)
-{
- if (irqs_disabled())
- HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
- else
- xen_safe_halt();
}
static void xen_leave_lazy(void)
@@ -1378,36 +1289,6 @@
},
};
-static void __init __xen_init_IRQ(void)
-{
-#ifdef CONFIG_X86_64
- int i;
-
- /* Create identity vector->irq map */
- for(i = 0; i < NR_VECTORS; i++) {
- int cpu;
-
- for_each_possible_cpu(cpu)
- per_cpu(vector_irq, cpu)[i] = i;
- }
-#endif /* CONFIG_X86_64 */
-
- xen_init_IRQ();
-}
-
-static const struct pv_irq_ops xen_irq_ops __initdata = {
- .init_IRQ = __xen_init_IRQ,
- .save_fl = xen_save_fl,
- .restore_fl = xen_restore_fl,
- .irq_disable = xen_irq_disable,
- .irq_enable = xen_irq_enable,
- .safe_halt = xen_safe_halt,
- .halt = xen_halt,
-#ifdef CONFIG_X86_64
- .adjust_exception_frame = xen_adjust_exception_frame,
-#endif
-};
-
static const struct pv_apic_ops xen_apic_ops __initdata = {
#ifdef CONFIG_X86_LOCAL_APIC
.setup_boot_clock = paravirt_nop,
@@ -1810,9 +1691,10 @@
pv_init_ops = xen_init_ops;
pv_time_ops = xen_time_ops;
pv_cpu_ops = xen_cpu_ops;
- pv_irq_ops = xen_irq_ops;
pv_apic_ops = xen_apic_ops;
pv_mmu_ops = xen_mmu_ops;
+
+ xen_init_irq_ops();
#ifdef CONFIG_X86_LOCAL_APIC
/*
===================================================================
--- /dev/null
+++ b/arch/x86/xen/irq.c
@@ -0,0 +1,143 @@
+#include <linux/hardirq.h>
+
+#include <xen/interface/xen.h>
+#include <xen/interface/sched.h>
+#include <xen/interface/vcpu.h>
+
+#include <asm/xen/hypercall.h>
+#include <asm/xen/hypervisor.h>
+
+#include "xen-ops.h"
+
+/*
+ * Force a proper event-channel callback from Xen after clearing the
+ * callback mask. We do this in a very simple manner, by making a call
+ * down into Xen. The pending flag will be checked by Xen on return.
+ */
+void xen_force_evtchn_callback(void)
+{
+ (void)HYPERVISOR_xen_version(0, NULL);
+}
+
+static void __init __xen_init_IRQ(void)
+{
+#ifdef CONFIG_X86_64
+ int i;
+
+ /* Create identity vector->irq map */
+ for(i = 0; i < NR_VECTORS; i++) {
+ int cpu;
+
+ for_each_possible_cpu(cpu)
+ per_cpu(vector_irq, cpu)[i] = i;
+ }
+#endif /* CONFIG_X86_64 */
+
+ xen_init_IRQ();
+}
+
+static unsigned long xen_save_fl(void)
+{
+ struct vcpu_info *vcpu;
+ unsigned long flags;
+
+ vcpu = x86_read_percpu(xen_vcpu);
+
+ /* flag has opposite sense of mask */
+ flags = !vcpu->evtchn_upcall_mask;
+
+ /* convert to IF type flag
+ -0 -> 0x00000000
+ -1 -> 0xffffffff
+ */
+ return (-flags) & X86_EFLAGS_IF;
+}
+
+static void xen_restore_fl(unsigned long flags)
+{
+ struct vcpu_info *vcpu;
+
+ /* convert from IF type flag */
+ flags = !(flags & X86_EFLAGS_IF);
+
+ /* There's a one instruction preempt window here. We need to
+ make sure we're don't switch CPUs between getting the vcpu
+ pointer and updating the mask. */
+ preempt_disable();
+ vcpu = x86_read_percpu(xen_vcpu);
+ vcpu->evtchn_upcall_mask = flags;
+ preempt_enable_no_resched();
+
+ /* Doesn't matter if we get preempted here, because any
+ pending event will get dealt with anyway. */
+
+ if (flags == 0) {
+ preempt_check_resched();
+ barrier(); /* unmask then check (avoid races) */
+ if (unlikely(vcpu->evtchn_upcall_pending))
+ xen_force_evtchn_callback();
+ }
+}
+
+static void xen_irq_disable(void)
+{
+ /* There's a one instruction preempt window here. We need to
+ make sure we're don't switch CPUs between getting the vcpu
+ pointer and updating the mask. */
+ preempt_disable();
+ x86_read_percpu(xen_vcpu)->evtchn_upcall_mask = 1;
+ preempt_enable_no_resched();
+}
+
+static void xen_irq_enable(void)
+{
+ struct vcpu_info *vcpu;
+
+ /* We don't need to worry about being preempted here, since
+ either a) interrupts are disabled, so no preemption, or b)
+ the caller is confused and is trying to re-enable interrupts
+ on an indeterminate processor. */
+
+ vcpu = x86_read_percpu(xen_vcpu);
+ vcpu->evtchn_upcall_mask = 0;
+
+ /* Doesn't matter if we get preempted here, because any
+ pending event will get dealt with anyway. */
+
+ barrier(); /* unmask then check (avoid races) */
+ if (unlikely(vcpu->evtchn_upcall_pending))
+ xen_force_evtchn_callback();
+}
+
+static void xen_safe_halt(void)
+{
+ /* Blocking includes an implicit local_irq_enable(). */
+ if (HYPERVISOR_sched_op(SCHEDOP_block, NULL) != 0)
+ BUG();
+}
+
+static void xen_halt(void)
+{
+ if (irqs_disabled())
+ HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
+ else
+ xen_safe_halt();
+}
+
+static const struct pv_irq_ops xen_irq_ops __initdata = {
+ .init_IRQ = __xen_init_IRQ,
+ .save_fl = xen_save_fl,
+ .restore_fl = xen_restore_fl,
+ .irq_disable = xen_irq_disable,
+ .irq_enable = xen_irq_enable,
+ .safe_halt = xen_safe_halt,
+ .halt = xen_halt,
+#ifdef CONFIG_X86_64
+ .adjust_exception_frame = xen_adjust_exception_frame,
+#endif
+};
+
+void __init xen_init_irq_ops()
+{
+ pv_irq_ops = xen_irq_ops;
+}
===================================================================
--- a/arch/x86/xen/xen-asm_32.S
+++ b/arch/x86/xen/xen-asm_32.S
@@ -298,7 +298,7 @@
push %eax
push %ecx
push %edx
- call force_evtchn_callback
+ call xen_force_evtchn_callback
pop %edx
pop %ecx
pop %eax
===================================================================
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -122,7 +122,7 @@
push %r9
push %r10
push %r11
- call force_evtchn_callback
+ call xen_force_evtchn_callback
pop %r11
pop %r10
pop %r9
===================================================================
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -32,6 +32,7 @@
void __init xen_build_dynamic_phys_to_machine(void);
+void xen_init_irq_ops(void);
void xen_setup_timer(int cpu);
void xen_setup_cpu_clockevents(void);
unsigned long xen_tsc_khz(void);
===================================================================
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -83,17 +83,6 @@
/* Xen will never allocate port zero for any purpose. */
#define VALID_EVTCHN(chn) ((chn) != 0)
-
-/*
- * Force a proper event-channel callback from Xen after clearing the
- * callback mask. We do this in a very simple manner, by making a call
- * down into Xen. The pending flag will be checked by Xen on return.
- */
-void force_evtchn_callback(void)
-{
- (void)HYPERVISOR_xen_version(0, NULL);
-}
-EXPORT_SYMBOL_GPL(force_evtchn_callback);
static struct irq_chip xen_dynamic_chip;
next reply other threads:[~2008-07-28 18:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-28 18:53 Jeremy Fitzhardinge [this message]
2008-07-28 19:32 ` [PATCH] xen: xen: compile irq functions without -pg for ftrace Sam Ravnborg
2008-07-28 19:50 ` Jeremy Fitzhardinge
2008-07-31 10:39 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=488E15C5.3070902@goop.org \
--to=jeremy@goop.org \
--cc=Alex.Nixon@eu.citrix.com \
--cc=ehabkost@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.