From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Tue, 29 Jul 2008 09:29:26 +0200 Subject: [U-Boot-Users] [PATCH 1/1] Add support for the hammerhead (AVR32) board In-Reply-To: <5162.7856-9591-1754018913-1216907464@seznam.cz> References: <1214222325-28905-1-git-send-email-mailinglist@miromico.ch> <1214222325-28905-2-git-send-email-mailinglist@miromico.ch> <20080723162459.1d035b8c@hskinnemo-gx745.norway.atmel.com> <20080723172042.414f8df0@hskinnemo-gx745.norway.atmel.com> <20080724094301.68c245b1@hskinnemo-gx745.norway.atmel.com> <20080724094628.552d1083@hskinnemo-gx745.norway.atmel.com> <20080724102555.195be6c5@hskinnemo-gx745.norway.atmel.com> <5162.7856-9591-1754018913-1216907464@seznam.cz> Message-ID: <488EC6D6.2040207@seznam.cz> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Could someone explain me what this message has relation with AVR32? This is 100% microblaze relate problems. Please change subject and cc to me if you have any problem with latest U-BOOT for Microblaze. Michal Simek > Hi John, > > look at > http://www.itee.uq.edu.au/~listarch/microblaze-uclinux/archive/2008/05/msg00163.html > > Please use > >> Hi, again. >> >> I've used a new vendor/platform, I have the uclinux running in the same >> target a ML501 with an older version based on ise and edk 8.2, but I need >> approach the advantages of microblaze v7.00 and the PLB. Please thanks for >> your help, and excuse my English. >> >> I don't know about inittab, and that init is selected in the application >> menu. >> >> >> 2008/7/24 Mostafa Ali : >> >>> Look there are so many reasons for this problem, Please mention more >>> detalis(like have you used one of the predefined platforms in the >>> vendor/platform menu or you created a new one). >>> >>> One of the reasons is that the kernel doesn't find a start up application. >>> Make sure that inittab is exist in /romfs and init is selected in the >>> application menu in petalinux configuration wizard. I need more de tails fro >>> you, I'll be waiting. >>> >>> --- On *Thu, 7/24/08, John Osorio * wrote: >>> >>> From: John Osorio >>> Subject: [microblaze-uclinux] Help with kernel boot, PLEASE >>> To: microblaze-uclinux at itee.uq.edu.au >>> Date: Thursday, July 24, 2008, 8:36 AM >>> >>> >>> Hi, folks >>> >>> I have a problem with the kernel boot, I'm using petalinux-v0.30-rc1 and >>> kernel 2.6, my hardware is development under EDK 9.2_02 and ISE 9.2_04. When >>> I'll try boot the image, the boot show in kermit the following: >>> >>> >>> ## Booting image at 8c080000 ... >>> Image Name: PetaLinux Kernel 2.6 >>> Image Type: Microblaze Linux Kernel Image (uncompressed) >>> Data Size: 2678812 Bytes = 2.6 MB >>> Load Address: 90000000 >>> Entry Point: 90000000 >>> Verifying Checksum ... OK >>> OK >>> >>> That's all I don't know, what's the problem, Please I need your Help, Bye. >>> The boot is freeze, Kermit don't show anything >>> >>> -- >>> John Osorio >>> >>> >>> >> >> -- >> John Osorio >> >> >> > > No virus found in this incoming message. > Checked by AVG - http://www.avg.com > Version: 8.0.138 / Virus Database: 270.5.5/1571 - Release Date: 24.7.2008 05:42 > > >