From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sajesh Singh Subject: Re: Strange DM issue on boot Date: Tue, 29 Jul 2008 10:47:24 -0400 Message-ID: <488F2D7C.9090905@amnh.org> References: <156D04C1A9F47A40BBAE9554FDC7CD7802568F08@3parm3.hq.3pardata.com> Reply-To: ssingh@amnh.org, device-mapper development Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <156D04C1A9F47A40BBAE9554FDC7CD7802568F08@3parm3.hq.3pardata.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: dm-devel-bounces@redhat.com Errors-To: dm-devel-bounces@redhat.com To: dm-devel@redhat.com List-Id: dm-devel.ids Charles Polk wrote: > The controllers are not happy with the panging on the controllers. > > Should I not be using the default settings in the /etc/multipath.conf? Are there any specific settings that need to be configured to use multipathd with an HDS AMS1000 array? > ----- Original Message ----- > From: dm-devel-bounces@redhat.com > To: dm-devel@redhat.com > Sent: Mon Jul 28 13:54:52 2008 > Subject: [dm-devel] Strange DM issue on boot > > EL 5.2 > Hitachi AMS1000 array > Qlogic HBA (qla2xxx driver) > > I am seeing a strange issue when rebooting a server connected to the > AMS1000 disk array. If I have a mount point defined in /etc/fstab that > points to a mulitpathe device I receive the following error: > > error calling out /sbin/mpath_prio_hds_modular 8:32 > > That error would seem to indicate a path failure, but if I remove the > entry from /etc/fstab and reboot I am able to mount the device from the > command line. I have tried to include the qlogic driver in the initrd, > but that did help in any way. Are the dm-multipath drivers loading at > the incorrect time? Has anyone ever encountered this before? > > Regards, > > Sajesh > > -- > dm-devel mailing list > dm-devel@redhat.com > https://www.redhat.com/mailman/listinfo/dm-devel >