From: Rick Jones <rick.jones2@hp.com>
To: Grant Grundler <grundler@parisc-linux.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>,
Matthew Wilcox <matthew@wil.cx>,
Parisc List <linux-parisc@vger.kernel.org>
Subject: Re: Cupertino test ring problem?
Date: Thu, 31 Jul 2008 10:26:24 -0700 [thread overview]
Message-ID: <4891F5C0.8010307@hp.com> (raw)
In-Reply-To: <20080731051524.GC18732@colo.lackof.org>
Grant Grundler wrote:
> On Tue, Jul 29, 2008 at 05:09:45PM -0500, James Bottomley wrote:
>
>>On Tue, 2008-07-29 at 13:57 -0700, Rick Jones wrote:
>>
>>>>gsyprf11 and gsyprf10 are still not responding to pings ... could the
>>>>IP routings have changed or something?
>>>
>>> > I can't connect to port 22 on any of gsyprf3, gsyprf10 or gsyprf11.
>>>
>>>Well, the IP's have remained the same, but the systems are physically in
>>>a different building. Both netperf.org and ftp.cup.hp.com have moved
>>>from the same starting point to the same end-point. If folks cannot
>>>ping them or cannot get to port 22 on those then there is still
>>>something amis in the network. Otherwise there is still something amis
>>>with gsyprf[3|10|11].
>>
>>gsyprf10 at least is one of the ia64 boxes. Helpfully it identifies
>>itself as lp1000 or something at the login prompt.
>
>
> gsyprf10 is an x86 machine (HP lp1000r netserver).
>
>
>>gsyprf11 is a PA A500 type box. It should identify as gsyprf11
>>at the login prompt. We
>>only need one up and running to begin diagnosing as we should be able to
>>then get to other remote consoles.
>
>
> I'll check with Rick tomorrow to see when I can drop by to help resurrect
> them.
>
> I expected gsyprf10 to auto reboot on it's own.
> I'll change gsyprf11 and gsyprf3 to also autoboot since I don't think they
> do at the moment.
I can confirm that gsyperf3 was/is not set to autoboot. I can also
state that it cannot successfully boot. During POST it spits-out FRU
problem messages and during OS boot boatloads of Segmentation Fault
output while it tries to boot, and end-up in busybox.
I'm not sure that gsyprf11 (pa) is connected to the external net.
I tried swapping the cables on gsyprf10 (the lp1000r) I have to see if
I can find the old monitor and keyboard to see what its boot state
happens to be.
Grant - wrt times, I'm here all week, from about 0930 to about 0330 each
day. I'd be around later but this week I'm playing single-parent :)
rick jones
next prev parent reply other threads:[~2008-07-31 17:26 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-28 14:19 Cupertino test ring problem? James Bottomley
2008-07-28 14:57 ` Matthew Wilcox
2008-07-28 17:09 ` Rick Jones
2008-07-28 17:15 ` Matthew Wilcox
2008-07-29 20:03 ` Rick Jones
2008-07-29 20:25 ` James Bottomley
2008-07-29 20:57 ` Rick Jones
2008-07-29 22:09 ` James Bottomley
2008-07-31 5:15 ` Grant Grundler
2008-07-31 17:26 ` Rick Jones [this message]
2008-08-01 23:31 ` Grant Grundler
2008-08-04 8:59 ` Thibaut VARENE
2008-08-04 15:34 ` John David Anglin
2008-08-04 15:39 ` Thibaut VARENE
2008-08-06 1:42 ` X won't start with VisEG and 2.6.22.19 John David Anglin
2008-08-06 5:11 ` Guy Martin
2008-08-14 20:54 ` Helge Deller
2008-08-14 21:24 ` John David Anglin
2008-08-15 15:09 ` Helge Deller
2008-08-23 14:49 ` John David Anglin
2008-07-29 20:26 ` Cupertino test ring problem? Matthew Wilcox
2008-08-01 23:32 ` Grant Grundler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4891F5C0.8010307@hp.com \
--to=rick.jones2@hp.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=grundler@parisc-linux.org \
--cc=linux-parisc@vger.kernel.org \
--cc=matthew@wil.cx \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.