From: "Mika Båtsman" <mika.batsman@gmail.com>
To: Marko Ristola <marko.ristola@kolumbus.fi>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] TerraTec Cinergy C DVB-C / Twinhan AD-CP400 (VP-2040) & mantis driver
Date: Tue, 05 Aug 2008 11:41:41 +0300 [thread overview]
Message-ID: <48981245.2050900@gmail.com> (raw)
In-Reply-To: <489766A4.7070907@kolumbus.fi>
Marko Ristola wrote:
> Mika Båtsman kirjoitti:
>> Hi,
>> I also tried your patch because I've had freezes since I got these
>> cards. Unfortunately it didn't help me. Got a whooping 5min uptime
>> before it all went wrong again. I have 2x Cinergy C + 2.6.24-19 + vdr
>> 1.6.
>>
> Do you have a heat problem? Have you checked your motherboard sensors?
> Have you checked that your memory is okay? Air flows easilly?
Memory was the first thing I suspected but memtest went through 10+
times without a fail. Heat shouldn't be a problem either. There's a big
efficient, noisy fan in the back of the case.
The machine works fine when dvb is watched with dvbyell
http://www.dvbyell.org/ which has cards set to fixed frequency ie. card1
-> 152Mhz and card2 -> 290Mhz. At least for me the problem occurs only
with apps like mythtv and vdr which change the frequency of the tuner.
-Mika
>> I did:
>> hg clone http://jusst.de/hg/mantis
>> replaced mantis_dma.c with the one you attached, renamed
>> MANTIS_GPIF_RDWRN -> MANTIS_GPIF_HIFRDWRN
>> make && make install && reboot
>>
>> Am I missing something? It seemed to compile and install fine.
>>
>> You said that the mantis_dma.c in jusst.de mantis head is not the
>> latest version. Where can it be found then?
> I have my own driver version which I have given for Finnish people for
> easy installation with remote control support for Twinhan 2033.
> (Personally I'm not pleased with the card: now after some years of
> development the card works well enough for me finally).
>
> So the most important feature of my driver for Finnish people has been
> the easy compile and install and that the driver ("release") is tested
> for Twinhan 2033.
> Secondly I have given for some Finnish people the Twinhan 2033 remote
> control support included.
> Maybe somebody from Finland would be interested with the DMA transfer
> fixes, if they have unsolved quality problems. That's a fact that those
> tweaks helped me although the root cause is a bit uncertain. Other
> features of my driver version like suspend/resume aren't very important.
>
> Regards,
> Marko Ristola
>
>>
>> Regards,
>> Mika Båtsman
>>
>> Marko Ristola wrote:
>>>
>>> Hi,
>>>
>>> Unfortunately I have been busy.
>>>
>>> The patch you tried was against jusst.de Mantis Mercurial branch head.
>>> Your version of mantis_dma.c is not the latest version and thus the
>>> patch didn't
>>> apply cleanly.
>>>
>>> Here is the version that I use currently. It doesn't compile straight
>>> against jusst.de/mantis head.
>>> It might work for you because MANTIS_GPIF_RDWRN is not renamed as
>>> MANTIS_GPIF_HIFRDWRN.
>>>
>>> If it doesn't compile please rename MANTIS_GPIF_RDWRN occurrences
>>> into MANTIS_GPIF_HIFRDWRN on that file.
>>> Otherwise the file should work as it is.
>>>
>>> Best regards,
>>> Marko Ristola
>>>
>>> Leif Oberste-Berghaus kirjoitti:
>>>> Hi Marko,
>>>>
>>>> I tried to patch the driver but I'm getting an error message:
>>>>
>>>> root@mediapc:/usr/local/src/test/mantis-0b04be0c088a# patch -p1 <
>>>> mantis_dma.c.aligned_dma_trs.patch
>>>> patching file linux/drivers/media/dvb/mantis/mantis_dma.c
>>>> patch: **** malformed patch at line 22: int mantis_dma_exit(struct
>>>> mantis_pci *mantis)
>>>>
>>>> Any ideas?
>>>>
>>>> Regards
>>>> Leif
>>>>
>>>>
>>>> Am 14.07.2008 um 22:05 schrieb Marko Ristola:
>>>>
>>>>> Hi Leif,
>>>>>
>>>>> Here is a patch that implements the mentioned DMA transfer
>>>>> improvements.
>>>>> I hope that these contain also the needed fix for you.
>>>>> You can apply it into jusst.de/mantis Mercurial branch.
>>>>> It modifies linux/drivers/media/dvb/mantis/mantis_dma.c only.
>>>>> I have compiled the patch against 2.6.25.9-76.fc9.x86_64.
>>>>>
>>>>> cd mantis
>>>>> patch -p1 < mantis_dma.c.aligned_dma_trs.patch
>>>>>
>>>>> Please tell us whether my patch helps you or not: if it helps, some
>>>>> of my patch might get into jusst.de as
>>>>> a fix for your problem.
>>>>>
>>>>> Best Regards,
>>>>> Marko
>>>>
>>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> linux-dvb mailing list
>>> linux-dvb@linuxtv.org
>>> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>>
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-08-05 8:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-10 20:42 [linux-dvb] TerraTec Cinergy C DVB-C / Twinhan AD-CP400 (VP-2040) & mantis driver Leif Oberste-Berghaus
2008-07-13 12:50 ` Marko Ristola
2008-07-13 20:49 ` Leif Oberste-Berghaus
2008-07-14 20:05 ` Marko Ristola
[not found] ` <D5C41D41-A72D-4603-9AD1-67A8C5E73289@oberste-berghaus.de>
2008-07-27 17:20 ` Marko Ristola
2008-07-29 12:30 ` Mika Båtsman
2008-08-04 20:29 ` Marko Ristola
2008-08-05 8:41 ` Mika Båtsman [this message]
2008-08-05 17:41 ` Marko Ristola
2008-08-06 6:52 ` Mika Båtsman
2008-08-06 19:54 ` Marko Ristola
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48981245.2050900@gmail.com \
--to=mika.batsman@gmail.com \
--cc=linux-dvb@linuxtv.org \
--cc=marko.ristola@kolumbus.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.