From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from nausicaa2.coritel.it (host254-130-static.190-82-b.business.telecomitalia.it [82.190.130.254]) by ozlabs.org (Postfix) with ESMTP id 7D087DE17E for ; Tue, 5 Aug 2008 23:20:17 +1000 (EST) Message-ID: <4898540C.2060105@coritel.it> Date: Tue, 05 Aug 2008 15:22:20 +0200 From: Marco Stornelli MIME-Version: 1.0 To: Zhivko Yordanov Subject: Re: Run Linux Kernel 2.6.26 with u-boot 1.1.2 - problem References: <200808051109.20398.jivkojj@uni-kassel.de> In-Reply-To: <200808051109.20398.jivkojj@uni-kassel.de> Content-Type: text/plain; charset=us-ascii; format=flowed Cc: linuxppc-embedded@ozlabs.org List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Zhivko Yordanov ha scritto: > Hi all, > > I have a PowerPC embedded board with CPU 7448 and Chipset Marvell 64560. > Till now, on board runs U-boot 1.1.2 and Linux kernel 2.6.12, with patches > from Marvell. > > I ported the Marvell patch to Linux 2.6.26, but I can't start it. Now I'm > searching for the problem. Is this possible with old u-boot (1.1.2) to start > new versions of Linux kernel, or I need to port u-boot too? > > Best regards, > Zhivko Yordanov > _______________________________________________ > Linuxppc-embedded mailing list > Linuxppc-embedded@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > Have you wrote the dts file? I suggest you to change Uboot, 1.1.2 is pretty old and if I remember correctly it doesn't support the dts, so you should build a cuImage with the dts embedded in the kernel. -- Marco Stornelli Embedded Software Engineer CoRiTeL - Consorzio di Ricerca sulle Telecomunicazioni http://www.coritel.it marco.stornelli@coritel.it +39 06 72582838