All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tomasz Chmielewski <mangoo@wpkg.org>
To: "Luis R. Rodriguez" <mcgrof@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>,
	linux-wireless@vger.kernel.org,
	OpenWrt Development List <openwrt-devel@lists.openwrt.org>
Subject: Re: kernel panic on p54pci insertion on mipsel
Date: Wed, 06 Aug 2008 21:02:24 +0200	[thread overview]
Message-ID: <4899F540.8050409@wpkg.org> (raw)
In-Reply-To: <43e72e890808051619u4ed7c447wd80a866192220b84@mail.gmail.com>

Luis R. Rodriguez schrieb:

(...)

>> - doesn't work with prism54.ko module (similar messages to
>> http://marc.info/?l=linux-wireless&m=120250829717134&w=2)
> 
> We need more details, or do you get *exactly* the same error messages?
> 
> "Out of memory, cannot handle oid" comes up after a failed kmalloc()
> while trying to handle an interrupt and management frame (not 802.11
> frame) from the firmware. From that archived mailing list though the
> oid 0x080002ff is mentioned and... well prism54 doesn't know what that
> is. I wonder if the firmware is triggering random interrupts with
> bogus oids.
> 
> If you can provide a complete log it can help. Also in your previous
> posts I see you mentioned you were working with different firmwares.
> 1.0.4.3.arm should *only* be used with prism54. You may also want to
> try an older firmware version than 1.0.4.3.arm, this one came from
> 3com cards.

Is older firmware available anywhere online?

This is a complete log (kernel outputs pasted below each command, kernel 
used is 2.6.25.12 with OpenWRT patches), firmware used is 1.0.4.3.arm - 
messages are essentially the same as the last time I tried with 2.6.23.x:

# modprobe prism54
Loaded prism54 driver, version 1.2
PCI: Fixing up device 0000:00:02.0

# dmesg -c
Loaded prism54 driver, version 1.2
PCI: Fixing up device 0000:00:02.0


# ifconfig eth2 up
eth2: Out of memory, cannot handle oid 0x030002ff
eth2: timeout waiting for mgmt response
eth2: mgt_commit_list: failure. oid=10000002 err=-145
eth2: Out of memory, cannot handle oid 0x00000012
eth2: timeout waiting for mgmt response
eth2: mgt_commit_list: failure. oid=12000005 err=-145
eth2: Out of memory, cannot handle oid 0x07000012
eth2: timeout waiting for mgmt response
eth2: mgt_commit_list: failure. oid=ff020003 err=-145
eth2: interface reset failure
prism54: Your card/socket may be faulty, or IRQ line too busy :(
SIOCSIFFLAGS: Connection timed out

# dmesg -c
eth2: resetting device...
eth2: uploading firmware...
eth2: firmware version: 1.0.4.3
eth2: firmware upload complete
eth2: Out of memory, cannot handle oid 0x030002ff
eth2: timeout waiting for mgmt response 250, triggering device
eth2: timeout waiting for mgmt response 225, triggering device
eth2: timeout waiting for mgmt response 200, triggering device
eth2: timeout waiting for mgmt response 175, triggering device
eth2: timeout waiting for mgmt response 150, triggering device
eth2: timeout waiting for mgmt response 125, triggering device
eth2: timeout waiting for mgmt response 100, triggering device
eth2: timeout waiting for mgmt response 75, triggering device
eth2: timeout waiting for mgmt response 50, triggering device
eth2: timeout waiting for mgmt response 25, triggering device
eth2: timeout waiting for mgmt response
eth2: mgt_commit_list: failure. oid=10000002 err=-145
eth2: Out of memory, cannot handle oid 0x00000012
eth2: timeout waiting for mgmt response 250, triggering device
eth2: timeout waiting for mgmt response 225, triggering device
eth2: timeout waiting for mgmt response 200, triggering device
eth2: timeout waiting for mgmt response 175, triggering device
eth2: timeout waiting for mgmt response 150, triggering device
eth2: timeout waiting for mgmt response 125, triggering device
eth2: timeout waiting for mgmt response 100, triggering device
eth2: timeout waiting for mgmt response 75, triggering device
eth2: timeout waiting for mgmt response 50, triggering device
eth2: timeout waiting for mgmt response 25, triggering device
eth2: timeout waiting for mgmt response
eth2: mgt_commit_list: failure. oid=12000005 err=-145
eth2: Out of memory, cannot handle oid 0x07000012
eth2: timeout waiting for mgmt response 250, triggering device
eth2: timeout waiting for mgmt response 225, triggering device
eth2: timeout waiting for mgmt response 200, triggering device
eth2: timeout waiting for mgmt response 175, triggering device
eth2: timeout waiting for mgmt response 150, triggering device
eth2: timeout waiting for mgmt response 125, triggering device
eth2: timeout waiting for mgmt response 100, triggering device
eth2: timeout waiting for mgmt response 75, triggering device
eth2: timeout waiting for mgmt response 50, triggering device
eth2: timeout waiting for mgmt response 25, triggering device
eth2: timeout waiting for mgmt response
eth2: mgt_commit_list: failure. oid=ff020003 err=-145
eth2: mgt_commit: failure
eth2: interface reset failure
prism54: Your card/socket may be faulty, or IRQ line too busy :(



-- 
Tomasz Chmielewski
http://wpkg.org


  parent reply	other threads:[~2008-08-06 19:02 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-08-05 19:55 kernel panic on p54pci insertion on mipsel Tomasz Chmielewski
2008-08-05 20:12 ` Johannes Berg
2008-08-05 21:54   ` Tomasz Chmielewski
2008-08-05 23:19     ` Luis R. Rodriguez
2008-08-06  8:02       ` Tomasz Chmielewski
2008-08-06 19:02       ` Tomasz Chmielewski [this message]
2008-08-06 19:50         ` Chr
2008-08-06 20:04           ` Tomasz Chmielewski
2008-08-06 20:16             ` Johannes Berg
2008-08-06 20:25               ` Tomasz Chmielewski
2008-08-06 20:28               ` Tomasz Chmielewski
2008-08-06 20:34                 ` Michael Buesch
2008-08-06 21:14                   ` Tomasz Chmielewski
2008-08-06 20:50                 ` Chr
2008-08-06 21:16                   ` Tomasz Chmielewski
2008-08-07  8:34                   ` Tomasz Chmielewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4899F540.8050409@wpkg.org \
    --to=mangoo@wpkg.org \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    --cc=mcgrof@gmail.com \
    --cc=openwrt-devel@lists.openwrt.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.