Re: [PATCH] i2c-mpc: suppress I2C device probing

[Wolfgang Grandegger <wg@grandegger.com>]

Jean Delvare wrote:
> Hi Grant, Wolgang,
> 
> On Thu, 17 Jul 2008 12:02:50 -0600, Grant Likely wrote:
>> On Thu, Jul 17, 2008 at 4:37 AM, Wolfgang Grandegger <wg@grandegger.com> wrote:
>>> This patch suppresses I2C device probing by clearing the class field
>>> of the "struct i2c_adapter" for the MPC I2C bus adapters. Some board
>>> configurations which rely on probing must be fixed up by adding a
>>> proper I2C device node to the DTS file, like the TQM85xx modules.
>>>
>>> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
>> Acked-by: Grant Likely <grant.likely@secretlab.ca>
>>
>>> ---
>>> drivers/i2c/busses/i2c-mpc.c |    1 -
>>> 1 file changed, 1 deletion(-)
>>>
>>> Index: powerpc/drivers/i2c/busses/i2c-mpc.c
>>> ===================================================================
>>> --- powerpc.orig/drivers/i2c/busses/i2c-mpc.c
>>> +++ powerpc/drivers/i2c/busses/i2c-mpc.c
>>> @@ -312,7 +312,6 @@ static struct i2c_adapter mpc_ops = {
>>>        .name = "MPC adapter",
>>>        .id = I2C_HW_MPC107,
>>>        .algo = &mpc_algo,
>>> -       .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
>>>        .timeout = 1,
>>> };
> 
> Unless you intend to push this patch upstream yourself (through the ppc
> tree), you should send it to Ben Dooks (who is in charge of this part
> of the i2c subsystem) with Cc to the i2c list.

I just want to mention, that other I2 bus drivers set I2C_CLASS_HWMON as well. 
Here are the PowerPC related ones:

  $ grep I2C_CLASS_HWMON *
  i2c-cpm.c:	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
  i2c-mpc.c:	.class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
  i2c-ibm_iic.c:	adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
  i2c-pasemi.c:	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
  i2c-mv64xxx.c:	drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;

It would be consequent to remove them as well.

Wolfgang.