From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2]: Add support for the muas3001 board
Date: Mon, 11 Aug 2008 08:39:27 +0200 [thread overview]
Message-ID: <489FDE9F.9020203@denx.de> (raw)
Hello,
[POWERPC] Added support for the muas3001 board from IAI,
based on a MPC8270 CPU.
Signed-off-by: Heiko Schocher <hs@denx.de>
---
Makefile | 9 +
board/muas3001/Makefile | 50 ++++++
board/muas3001/config.mk | 24 +++
board/muas3001/muas3001.c | 388 ++++++++++++++++++++++++++++++++++++++++++++
include/configs/muas3001.h | 382 +++++++++++++++++++++++++++++++++++++++++++
5 files changed, 853 insertions(+), 0 deletions(-)
create mode 100644 board/muas3001/Makefile
create mode 100644 board/muas3001/config.mk
create mode 100644 board/muas3001/muas3001.c
create mode 100644 include/configs/muas3001.h
diff --git a/Makefile b/Makefile
index 3179c67..9c3de1c 100644
--- a/Makefile
+++ b/Makefile
@@ -1672,6 +1672,15 @@ PQ2FADS-ZU_66MHz_lowboot_config \
MPC8266ADS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads freescale
+muas3001_dev_config \
+muas3001_config : unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/muas3001
+ @if [ "$(findstring dev,$@)" ] ; then \
+ echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
+ fi
+ @$(MKCONFIG) -a muas3001 ppc mpc8260 muas3001
+
# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash
PM825_config \
PM825_ROMBOOT_config \
diff --git a/board/muas3001/Makefile b/board/muas3001/Makefile
new file mode 100644
index 0000000..a4413b2
--- /dev/null
+++ b/board/muas3001/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2001-2008
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/muas3001/config.mk b/board/muas3001/config.mk
new file mode 100644
index 0000000..cdd0ec9
--- /dev/null
+++ b/board/muas3001/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2008
+# Heiko Schocher, DENX Software Engineering, hs at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFF000000
diff --git a/board/muas3001/muas3001.c b/board/muas3001/muas3001.c
new file mode 100644
index 0000000..1c33493
--- /dev/null
+++ b/board/muas3001/muas3001.c
@@ -0,0 +1,388 @@
+/*
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <ioports.h>
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+const iop_conf_t iop_conf_tab[4][32] = {
+
+ /* Port A */
+ { /* conf ppar psor pdir podr pdat */
+ /* PA31 */ { 0, 0, 0, 0, 0, 0 }, /* PA31 */
+ /* PA30 */ { 0, 0, 0, 0, 0, 0 }, /* PA30 */
+ /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXER */
+ /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */
+ /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */
+ /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXER */
+ /* PA25 */ { 1, 0, 0, 1, 0, 0 }, /* ETH_PWRDWN */
+ /* PA24 */ { 1, 0, 0, 1, 0, 1 }, /* ETH_RESET */
+ /* PA23 */ { 0, 0, 0, 0, 0, 0 }, /* PA23 */
+ /* PA22 */ { 0, 0, 0, 0, 0, 0 }, /* PA22 */
+ /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */
+ /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */
+ /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */
+ /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */
+ /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */
+ /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */
+ /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */
+ /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */
+ /* PA13 */ { 0, 0, 0, 0, 0, 0 }, /* PA13 */
+ /* PA12 */ { 1, 0, 0, 1, 0, 0 }, /* ETH_SLEEP */
+ /* PA11 */ { 0, 0, 0, 0, 0, 0 }, /* PA11 */
+ /* PA10 */ { 1, 0, 0, 1, 0, 0 }, /* MDIO */
+ /* PA9 */ { 1, 0, 0, 1, 0, 0 }, /* MDC */
+ /* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RxD */
+ /* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* PA7 */
+ /* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* PA6 */
+ /* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* PA5 */
+ /* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* PA4 */
+ /* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* PA3 */
+ /* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* PA2 */
+ /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* PA1 */
+ /* PA0 */ { 0, 0, 0, 0, 0, 0 } /* PA0 */
+ },
+
+ /* Port B */
+ { /* conf ppar psor pdir podr pdat */
+ /* PB31 */ { 0, 0, 0, 0, 0, 0 }, /* PB31 */
+ /* PB30 */ { 0, 0, 0, 0, 0, 0 }, /* PB30 */
+ /* PB29 */ { 0, 0, 0, 0, 0, 0 }, /* PB29 */
+ /* PB28 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 TxD */
+ /* PB27 */ { 0, 0, 0, 0, 0, 0 }, /* PB27 */
+ /* PB26 */ { 0, 0, 0, 0, 0, 0 }, /* PB26 */
+ /* PB25 */ { 0, 0, 0, 0, 0, 0 }, /* PB25 */
+ /* PB24 */ { 0, 0, 0, 0, 0, 0 }, /* PB24 */
+ /* PB23 */ { 0, 0, 0, 0, 0, 0 }, /* PB23 */
+ /* PB22 */ { 0, 0, 0, 0, 0, 0 }, /* PB22 */
+ /* PB21 */ { 0, 0, 0, 0, 0, 0 }, /* PB21 */
+ /* PB20 */ { 0, 0, 0, 0, 0, 0 }, /* PB20 */
+ /* PB19 */ { 0, 0, 0, 0, 0, 0 }, /* PB19 */
+ /* PB18 */ { 0, 0, 0, 0, 0, 0 }, /* PB18 */
+ /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB15 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */
+ /* PB14 */ { 1, 1, 0, 0, 0, 0 }, /* SCC3 RxD */
+ /* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB12 */ { 1, 1, 1, 1, 0, 0 }, /* SCC2 TxD */
+ /* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB8 */ { 1, 1, 1, 1, 0, 0 }, /* SCC3 TxD */
+ /* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
+ },
+
+ /* Port C */
+ { /* conf ppar psor pdir podr pdat */
+ /* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* PC31 */
+ /* PC30 */ { 1, 1, 1, 1, 0, 0 }, /* Timer1 OUT */
+ /* PC29 */ { 0, 0, 0, 0, 0, 0 }, /* PC29 */
+ /* PC28 */ { 0, 0, 0, 0, 0, 0 }, /* PC28 */
+ /* PC27 */ { 0, 0, 0, 0, 0, 0 }, /* PC27 */
+ /* PC26 */ { 0, 0, 0, 0, 0, 0 }, /* PC26 */
+ /* PC25 */ { 0, 0, 0, 0, 0, 0 }, /* PC25 */
+ /* PC24 */ { 0, 0, 0, 0, 0, 0 }, /* PC24 */
+ /* PC23 */ { 0, 0, 0, 0, 0, 0 }, /* PC23 */
+ /* PC22 */ { 0, 0, 0, 0, 0, 0 }, /* PC22 */
+ /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC RxCLK 11 */
+ /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC TxCLK 12 */
+ /* PC19 */ { 0, 0, 0, 0, 0, 0 }, /* PC19 */
+ /* PC18 */ { 0, 0, 0, 0, 0, 0 }, /* PC18 */
+ /* PC17 */ { 0, 0, 0, 0, 0, 0 }, /* PC17 */
+ /* PC16 */ { 0, 0, 0, 0, 0, 0 }, /* PC16 */
+ /* PC15 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TxD */
+ /* PC14 */ { 0, 0, 0, 0, 0, 0 }, /* PC14 */
+ /* PC13 */ { 0, 0, 0, 0, 0, 0 }, /* PC13 */
+ /* PC12 */ { 1, 0, 0, 1, 0, 0 }, /* TX OUTPUT SLEW1 */
+ /* PC11 */ { 1, 0, 0, 1, 0, 0 }, /* TX OUTPUT SLEW0 */
+ /* PC10 */ { 0, 0, 0, 0, 0, 0 }, /* PC10 */
+ /* PC9 */ { 1, 0, 0, 1, 0, 1 }, /* SPA_TX_EN */
+ /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* PC8 */
+ /* PC7 */ { 0, 0, 0, 0, 0, 0 }, /* PC7 */
+ /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* PC6 */
+ /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* PC5 */
+ /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* PC4 */
+ /* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* PC3 */
+ /* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* PC2 */
+ /* PC1 */ { 0, 0, 0, 0, 0, 0 }, /* PC1 */
+ /* PC0 */ { 0, 0, 0, 0, 0, 0 }, /* PC0 */
+ },
+
+ /* Port D */
+ { /* conf ppar psor pdir podr pdat */
+ /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 RxD */
+ /* PD30 */ { 0, 0, 0, 0, 0, 0 }, /* PD30 */
+ /* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* PD29 */
+ /* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* PD28 */
+ /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* PD27 */
+ /* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* PD26 */
+ /* PD25 */ { 0, 0, 0, 0, 0, 0 }, /* PD25 */
+ /* PD24 */ { 0, 0, 0, 0, 0, 0 }, /* PD24 */
+ /* PD23 */ { 0, 0, 0, 0, 0, 0 }, /* PD23 */
+ /* PD22 */ { 1, 1, 0, 0, 0, 0 }, /* SCC4: RXD */
+ /* PD21 */ { 1, 1, 0, 1, 0, 0 }, /* SCC4: TXD */
+ /* PD20 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */
+ /* PD19 */ { 0, 0, 0, 0, 0, 0 }, /* PD19 */
+ /* PD18 */ { 0, 0, 0, 0, 0, 0 }, /* PD18 */
+ /* PD17 */ { 0, 0, 0, 0, 0, 0 }, /* PD17 */
+ /* PD16 */ { 0, 0, 0, 0, 0, 0 }, /* PD16 */
+ /* PD15 */ { 1, 1, 1, 0, 0, 0 }, /* I2C SDA */
+ /* PD14 */ { 1, 1, 1, 0, 0, 0 }, /* I2C SCL */
+ /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
+ /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
+ /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
+ /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
+ /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TxD */
+ /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RxD */
+ /* PD7 */ { 0, 0, 0, 0, 0, 0 }, /* PD7 */
+ /* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* PD6 */
+ /* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* PD5 */
+ /* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* PD4 */
+ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* non-existent */
+ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* non-existent */
+ }
+};
+
+/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
+ *
+ * This routine performs standard 8260 initialization sequence
+ * and calculates the available memory size. It may be called
+ * several times to try different SDRAM configurations on both
+ * 60x and local buses.
+ */
+static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
+ ulong orx, volatile uchar * base)
+{
+ volatile uchar c = 0xff;
+ volatile uint *sdmr_ptr;
+ volatile uint *orx_ptr;
+ ulong maxsize, size;
+ int i;
+
+ /* We must be able to test a location outsize the maximum legal size
+ * to find out THAT we are outside; but this address still has to be
+ * mapped by the controller. That means, that the initial mapping has
+ * to be (at least) twice as large as the maximum expected size.
+ */
+ maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
+
+ sdmr_ptr = &memctl->memc_psdmr;
+ orx_ptr = &memctl->memc_or1;
+
+ *orx_ptr = orx;
+
+ /*
+ * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+ *
+ * "At system reset, initialization software must set up the
+ * programmable parameters in the memory controller banks registers
+ * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+ * system software should execute the following initialization sequence
+ * for each SDRAM device.
+ *
+ * 1. Issue a PRECHARGE-ALL-BANKS command
+ * 2. Issue eight CBR REFRESH commands
+ * 3. Issue a MODE-SET command to initialize the mode register
+ *
+ * The initial commands are executed by setting P/LSDMR[OP] and
+ * accessing the SDRAM with a single-byte transaction."
+ *
+ * The appropriate BRx/ORx registers have already been set when we
+ * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ */
+
+ *sdmr_ptr = sdmr | PSDMR_OP_PREA;
+ *base = c;
+
+ *sdmr_ptr = sdmr | PSDMR_OP_CBRR;
+ for (i = 0; i < 8; i++)
+ *base = c;
+
+ *sdmr_ptr = sdmr | PSDMR_OP_MRW;
+ *(base + CFG_MRS_OFFS) = c; /* setting MR on address lines */
+
+ *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+ *base = c;
+
+ size = get_ram_size((long *)base, maxsize);
+ *orx_ptr = orx | ~(size - 1);
+
+ return (size);
+}
+
+long int initdram(int board_type)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+
+ long psize;
+
+ memctl->memc_psrt = CFG_PSRT;
+ memctl->memc_mptpr = CFG_MPTPR;
+
+#ifndef CFG_RAMBOOT
+ /* 60x SDRAM setup:
+ */
+ psize = try_init (memctl, CFG_PSDMR, CFG_OR1,
+ (uchar *) CFG_SDRAM_BASE);
+#endif /* CFG_RAMBOOT */
+
+ icache_enable ();
+
+ return (psize);
+}
+
+int checkboard(void)
+{
+ puts("Board: MUAS3001\n");
+
+ return 0;
+}
+
+/*
+ * Early board initalization.
+ */
+int board_early_init_r(void)
+{
+ return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+/*
+ * update "memory" property in the blob
+ */
+void ft_blob_update(void *blob, bd_t *bd)
+{
+ int ret, nodeoffset = 0;
+ ulong memory_data[2] = {0};
+ ulong flash_data[4] = {0};
+ ulong freq = 0;
+ ulong speed = 0;
+
+ memory_data[0] = cpu_to_be32(bd->bi_memstart);
+ memory_data[1] = cpu_to_be32(bd->bi_memsize);
+
+ nodeoffset = fdt_path_offset (blob, "/memory");
+ if (nodeoffset >= 0) {
+ ret = fdt_setprop(blob, nodeoffset, "reg", memory_data,
+ sizeof(memory_data));
+ if (ret < 0)
+ printf("ft_blob_update): cannot set /memory/reg "
+ "property err:%s\n", fdt_strerror(ret));
+ }
+ else {
+ /* memory node is required in dts */
+ printf("ft_blob_update(): cannot find /memory node "
+ "err:%s\n", fdt_strerror(nodeoffset));
+ }
+ /* update Flash addr, size */
+ flash_data[2] = cpu_to_be32(CFG_FLASH_BASE);
+ flash_data[3] = cpu_to_be32(CFG_FLASH_SIZE);
+ nodeoffset = fdt_path_offset (blob, "/localbus");
+ if (nodeoffset >= 0) {
+ ret = fdt_setprop(blob, nodeoffset, "ranges", flash_data,
+ sizeof(flash_data));
+ if (ret < 0)
+ printf("ft_blob_update): cannot set /localbus/ranges "
+ "property err:%s\n", fdt_strerror(ret));
+ }
+ else {
+ /* memory node is required in dts */
+ printf("ft_blob_update(): cannot find /localbus node "
+ "err:%s\n", fdt_strerror(nodeoffset));
+ }
+ /* MAC Adresse */
+ nodeoffset = fdt_path_offset (blob, "/soc/cpm/ethernet");
+ if (nodeoffset >= 0) {
+ ret = fdt_setprop(blob, nodeoffset, "mac-address", bd->bi_enetaddr,
+ sizeof(uchar) * 6);
+ if (ret < 0)
+ printf("ft_blob_update): cannot set /soc/cpm/ethernet/mac-address "
+ "property err:%s\n", fdt_strerror(ret));
+ }
+ else {
+ /* memory node is required in dts */
+ printf("ft_blob_update(): cannot find /soc/cpm/ethernet node "
+ "err:%s\n", fdt_strerror(nodeoffset));
+ }
+
+ /* brg clock */
+ nodeoffset = fdt_path_offset (blob, "/soc/cpm/brg");
+ if (nodeoffset >= 0) {
+ freq = cpu_to_be32(bd->bi_brgfreq);
+ ret = fdt_setprop(blob, nodeoffset, "clock-frequency", &freq,
+ sizeof(unsigned long));
+ if (ret < 0)
+ printf("ft_blob_update): cannot set /soc/cpm/brg/clock-frequency "
+ "property err:%s\n", fdt_strerror(ret));
+ }
+ else {
+ /* memory node is required in dts */
+ printf("ft_blob_update(): cannot find /soc/cpm/brg/clock-frequency node "
+ "err:%s\n", fdt_strerror(nodeoffset));
+ }
+
+ /* baudrate */
+ nodeoffset = fdt_path_offset (blob, "/soc/cpm/serial");
+ if (nodeoffset >= 0) {
+ speed = cpu_to_be32(bd->bi_baudrate);
+ ret = fdt_setprop(blob, nodeoffset, "current-speed", &speed,
+ sizeof(unsigned long));
+ if (ret < 0)
+ printf("ft_blob_update): cannot set /soc/cpm/serial/current-speed "
+ "property err:%s\n", fdt_strerror(ret));
+ }
+ else {
+ /* baudrate is required in dts */
+ printf("ft_blob_update(): cannot find /soc/cpm/smc2/current-speed node "
+ "err:%s\n", fdt_strerror(nodeoffset));
+ }
+
+
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup( blob, bd);
+ ft_blob_update(blob, bd);
+}
+#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h
new file mode 100644
index 0000000..f915e55
--- /dev/null
+++ b/include/configs/muas3001.h
@@ -0,0 +1,382 @@
+/*
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_8260 1
+#define CONFIG_MPC8260 1
+#define CONFIG_MUAS3001 1
+
+#define CONFIG_CPM2 1 /* Has a CPM2 */
+
+/* Do boardspecific init */
+#define CONFIG_BOARD_EARLY_INIT_R 1
+
+/*
+ * Select serial console configuration
+ *
+ * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ */
+#define CONFIG_CONS_ON_SMC /* Console is on SMC */
+#undef CONFIG_CONS_ON_SCC /* It's not on SCC */
+#undef CONFIG_CONS_NONE /* It's not on external UART */
+#if defined(CONFIG_MUAS_DEV_BOARD)
+#define CONFIG_CONS_INDEX 2 /* SMC2 is used for console */
+#else
+#define CONFIG_CONS_INDEX 1 /* SMC1 is used for console */
+#endif
+
+/*
+ * Select ethernet configuration
+ *
+ * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected,
+ * then CONFIG_ETHER_INDEX must be set to the channel number (1-4 for
+ * SCC, 1-3 for FCC)
+ *
+ * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
+ */
+#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
+#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
+#undef CONFIG_ETHER_NONE /* No external Ethernet */
+
+#define CONFIG_ETHER_INDEX 1
+#define CONFIG_ETHER_ON_FCC1
+#define FCC_ENET
+
+/*
+ * - Rx-CLK is CLK11
+ * - Tx-CLK is CLK12
+ */
+# define CFG_CMXFCR_VALUE (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK12)
+# define CFG_CMXFCR_MASK (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
+/*
+ * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
+ */
+# define CFG_CPMFCR_RAMTYPE (0)
+/* know on local Bus */
+//# define CFG_CPMFCR_RAMTYPE (CPMFCR_DTB | CPMFCR_BDB)
+/*
+ * - Enable Full Duplex in FSMR
+ */
+# define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
+
+#define CONFIG_MII /* MII PHY management */
+#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
+# define CFG_PHY_ADDR 1
+/*
+ * GPIO pins used for bit-banged MII communications
+ */
+#define MDIO_PORT 0 /* Port A */
+
+#define CFG_MDIO_PIN 0x00200000 /* PA10 */
+#define CFG_MDC_PIN 0x00400000 /* PA9 */
+
+#define MDIO_ACTIVE (iop->pdir |= CFG_MDIO_PIN)
+#define MDIO_TRISTATE (iop->pdir &= ~CFG_MDIO_PIN)
+#define MDIO_READ ((iop->pdat & CFG_MDIO_PIN) != 0)
+
+#define MDIO(bit) if(bit) iop->pdat |= CFG_MDIO_PIN; \
+ else iop->pdat &= ~CFG_MDIO_PIN
+
+#define MDC(bit) if(bit) iop->pdat |= CFG_MDC_PIN; \
+ else iop->pdat &= ~CFG_MDC_PIN
+
+#define MIIDELAY udelay(1)
+
+#ifndef CONFIG_8260_CLKIN
+#define CONFIG_8260_CLKIN 66000000 /* in Hz */
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+
+/*
+ * Default environment settings
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "u-boot_addr=100000\0" \
+ "kernel_addr=200000\0" \
+ "fdt_addr=400000\0" \
+ "rootpath=/opt/eldk-4.2-2008-04-01/ppc_82xx\0" \
+ "u-boot=u-boot.bin\0" \
+ "bootfile=uImage\0" \
+ "fdt_file=muas3001.dtb\0" \
+ "kernel_file=uImage\0" \
+ "ramdisk_file=uRamdisk\0" \
+ "load=tftp ${u-boot_addr} ${u-boot}\0" \
+ "update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; " \
+ "cp.b ${u-boot_addr} ff000000 ${filesize};" \
+ "prot on ff000000 ff03ffff\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "addcons=setenv bootargs ${bootargs} console=ttyCPM0,${baudrate}\0" \
+ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:" \
+ "${netmask}:${hostname}:${netdev}:off panic=1\0" \
+ "net_nfs=tftp ${kernel_addr} ${bootfile}; " \
+ "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip addcons;" \
+ "bootm ${kernel_addr} - ${fdt_addr}\0" \
+ "net_self=tftp ${kernel_addr} ${bootfile}; " \
+ "tftp ${fdt_addr} ${fdt_file}; " \
+ "tftp ${ramdisk_addr} ${ramdisk_file}; " \
+ "run ramargs addip; " \
+ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
+ "ramdisk_addr=ff210000\0" \
+ "kernel_addr_self=ff050000\0" \
+ "fdt_addr_self=ff200000\0" \
+ "flash_self=run ramargs addip addcons;bootm ${kernel_addr_self}" \
+ " ${ramdisk_addr} ${fdt_addr_self}\0" \
+ "updateramdisk=era ${ramdisk_addr} +1f0000;tftpb ${kernel_addr} ${ramdisk_file};" \
+ "cp.b ${kernel_addr} ${ramdisk_addr} ${filesize}\0" \
+ "updatekernel=era ${kernel_addr_self} +1b0000;tftpb ${kernel_addr} ${kernel_file};" \
+ "cp.b ${kernel_addr} ${kernel_addr_self} ${filesize}\0" \
+ "updatefdt=era ${fdt_addr_self} +10000;tftpb ${fdt_addr} ${fdt_file};" \
+ "cp.b ${fdt_addr} ${fdt_addr_self} ${filesize}\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "run net_nfs"
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFF000000
+#define CFG_FLASH_SIZE 32
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
+#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256KB for Monitor */
+
+#define CFG_ENV_IS_IN_FLASH
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x10000
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
+/*
+ * I2C Bus
+ */
+#define CONFIG_HARD_I2C 1 /* To enable I2C support */
+#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_IMMR 0xF0000000
+#define CFG_DEFAULT_IMMR 0x0F010000
+
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/* Hard reset configuration word */
+#define CFG_HRCW_MASTER 0x0E028200 /* BPS=11 CIP=1 ISB=010 BMS=1 */
+
+/* No slaves */
+#define CFG_HRCW_SLAVE1 0
+#define CFG_HRCW_SLAVE2 0
+#define CFG_HRCW_SLAVE3 0
+#define CFG_HRCW_SLAVE4 0
+#define CFG_HRCW_SLAVE5 0
+#define CFG_HRCW_SLAVE6 0
+#define CFG_HRCW_SLAVE7 0
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+#define CFG_HID0_INIT 0
+#define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE)
+
+#define CFG_HID2 0
+
+#define CFG_SIUMCR 0x00200000
+#define CFG_SYPCR 0xFFFFFFC3
+#define CFG_BCR 0x004c0000
+#define CFG_SCCR 0x0
+
+/*-----------------------------------------------------------------------
+ * RMR - Reset Mode Register 5-5
+ *-----------------------------------------------------------------------
+ * turn on Checkstop Reset Enable
+ */
+#define CFG_RMR 0
+
+/*-----------------------------------------------------------------------
+ * TMCNTSC - Time Counter Status and Control 4-40
+ *-----------------------------------------------------------------------
+ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
+ * and enable Time Counter
+ */
+#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 4-42
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
+ * Periodic timer
+ */
+#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
+
+/*-----------------------------------------------------------------------
+ * RCCR - RISC Controller Configuration 13-7
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RCCR 0
+
+/*
+ * Init Memory Controller:
+ *
+ * Bank Bus Machine PortSz Device
+ * ---- --- ------- ------ ------
+ * 0 60x GPCM 32 bit FLASH
+ * 1 60x SDRAM 64 bit SDRAM
+ * 4 60x GPCM 16 bit I/O Ctrl
+ *
+ */
+/* Bank 0 - FLASH
+ */
+#define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BRx_BA_MSK) |\
+ BRx_PS_32 |\
+ BRx_MS_GPCM_P |\
+ BRx_V)
+
+#define CFG_OR0_PRELIM (0xff000020)
+
+/* Bank 1 - 60x bus SDRAM
+ */
+#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
+#define CFG_GLOBAL_SDRAM_LIMIT (256 << 20) /* less than 256 MB */
+
+#define CFG_MPTPR 0x2800
+
+/*-----------------------------------------------------------------------------
+ * Address for Mode Register Set (MRS) command
+ *-----------------------------------------------------------------------------
+ */
+#define CFG_MRS_OFFS 0x00000110
+#define CFG_PSRT 0x13
+
+#define CFG_BR1_PRELIM ((CFG_SDRAM_BASE & BRx_BA_MSK) |\
+ BRx_PS_64 |\
+ BRx_MS_SDRAM_P |\
+ BRx_V)
+
+#define CFG_OR1_PRELIM CFG_OR1
+
+/* SDRAM initialization values
+*/
+#define CFG_OR1 0xfe002ec0
+#define CFG_PSDMR 0x004b36a3
+
+/* IO on CS4 initialization values
+*/
+#define CFG_IO_BASE 0xc0000000
+#define CFG_IO_SIZE 1
+
+#define CFG_BR4_PRELIM ((CFG_IO_BASE & BRx_BA_MSK) |\
+ BRx_PS_32 | BRx_MS_GPCM_L | BRx_V)
+
+#define CFG_OR4_PRELIM (0xfff80020)
+
+#define CFG_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+#define OF_CPU "PowerPC,8270 at 0"
+#define OF_SOC "soc@f0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#if defined(CONFIG_MUAS_DEV_BOARD)
+#define OF_STDOUT_PATH "/soc/cpm/serial at 11a90"
+#else
+#define OF_STDOUT_PATH "/soc/cpm/serial at 11a80"
+#endif
+
+#endif /* __CONFIG_H */
--
1.5.6.1
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next reply other threads:[~2008-08-11 6:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-11 6:39 Heiko Schocher [this message]
2008-08-18 22:44 ` [U-Boot] [PATCH 1/2]: Add support for the muas3001 board Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=489FDE9F.9020203@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.