From mboxrd@z Thu Jan 1 00:00:00 1970 From: Robert Horvath Date: Tue, 12 Aug 2008 16:34:56 +0200 Subject: [ath9k-devel] ath9k on DWA556 - Very low data rate in Ad-Hoc mode Message-ID: <48A19F90.5050300@tmit.bme.hu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Louis, We are in desperate need of ad-hoc networking, any help would be really appreciated. When dou you plan to finish the ad-hoc networking? If you don't know when, who can provide informatin for us about timing? Is there a possibility to help you with the development of this functionality? Do you have any suggestions how we can help to make the development process shorter? Thanks, Robert Do you have an idea when the ad-hoc capability will be >On Mon, Aug 11, 2008 at 03:26:05AM -0700, Saravanan M P wrote: >> Hi >> I installed this DLink PCIe cards in the two desktops to create an adhoc network. Surprisingly, the data rate that I got (verified through Iperf) was around 1Mbps. All default settings. >> Any one faced this issue earlier? Any suggested solutions? >> I'm trying to stream video between these machines and need a good throughput. > >Saravanan, > >Thanks for reporting this and testing. As of right now Ad-hoc just has >the initial bits and pieces, we haven't finished it nor tested it >thoroughly. For now you should not rely on it. We will address this >eventually though. > >Thanks, > > Luis > >