From: Matthew Ranostay <mranostay@embeddedalley.com>
To: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.de>
Subject: [PATCH] hda: dynamically create capture mux contols
Date: Thu, 14 Aug 2008 12:03:32 -0400 [thread overview]
Message-ID: <48A45754.3040504@embeddedalley.com> (raw)
Dynamically create capture mux volume controls when a output amp is detected.
---
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
diff --git a/pci/hda/patch_sigmatel.c b/pci/hda/patch_sigmatel.c
index ff56432..621cc48 100644
--- a/pci/hda/patch_sigmatel.c
+++ b/pci/hda/patch_sigmatel.c
@@ -794,7 +794,9 @@ static struct snd_kcontrol_new stac9200_mixer[] = {
STAC_INPUT_SOURCE(1),
HDA_CODEC_VOLUME("Capture Volume", 0x0a, 0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x0a, 0, HDA_OUTPUT),
+ /*
HDA_CODEC_VOLUME("Capture Mux Volume", 0x0c, 0, HDA_OUTPUT),
+ */
{ } /* end */
};
@@ -908,14 +910,15 @@ static struct snd_kcontrol_new
stac92hd71bxx_analog_mixer[] = {
HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1c, 0x0, HDA_OUTPUT),
+ /*
HDA_CODEC_VOLUME_IDX("Capture Mux Volume", 0x0, 0x1a, 0x0, HDA_OUTPUT),
+ */
HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x1d, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x1d, 0x0, HDA_OUTPUT),
- HDA_CODEC_VOLUME_IDX("Capture Mux Volume", 0x1, 0x1b, 0x0, HDA_OUTPUT),
-
/* analog pc-beep replaced with digital beep support */
/*
+ HDA_CODEC_VOLUME_IDX("Capture Mux Volume", 0x1, 0x1b, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("PC Beep Volume", 0x17, 0x2, HDA_INPUT),
HDA_CODEC_MUTE("PC Beep Switch", 0x17, 0x2, HDA_INPUT),
*/
@@ -931,11 +934,15 @@ static struct snd_kcontrol_new stac92hd71bxx_mixer[] = {
HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1c, 0x0, HDA_OUTPUT),
+ /*
HDA_CODEC_VOLUME_IDX("Capture Mux Volume", 0x0, 0x1a, 0x0, HDA_OUTPUT),
+ */
HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x1d, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x1d, 0x0, HDA_OUTPUT),
+ /*
HDA_CODEC_VOLUME_IDX("Capture Mux Volume", 0x1, 0x1b, 0x0, HDA_OUTPUT),
+ */
{ } /* end */
};
@@ -943,7 +950,9 @@ static struct snd_kcontrol_new stac925x_mixer[] = {
STAC_INPUT_SOURCE(1),
HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x14, 0, HDA_OUTPUT),
+ /*
HDA_CODEC_VOLUME("Capture Mux Volume", 0x0f, 0, HDA_OUTPUT),
+ */
{ } /* end */
};
@@ -957,8 +966,9 @@ static struct snd_kcontrol_new stac9205_mixer[] = {
HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x1c, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x1e, 0x0, HDA_OUTPUT),
+ /*
HDA_CODEC_VOLUME_IDX("Mux Capture Volume", 0x1, 0x1A, 0x0, HDA_OUTPUT),
-
+ */
{ } /* end */
};
@@ -971,7 +981,9 @@ static struct snd_kcontrol_new stac922x_mixer[] = {
HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x18, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x18, 0x0, HDA_INPUT),
+ /*
HDA_CODEC_VOLUME_IDX("Mux Capture Volume", 0x1, 0x13, 0x0, HDA_OUTPUT),
+ */
{ } /* end */
};
@@ -990,7 +1002,9 @@ static struct snd_kcontrol_new stac927x_mixer[] = {
HDA_CODEC_VOLUME_IDX("Capture Volume", 0x2, 0x1A, 0x0, HDA_INPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 0x2, 0x1d, 0x0, HDA_OUTPUT),
+ /*
HDA_CODEC_VOLUME_IDX("Mux Capture Volume", 0x2, 0x17, 0x0, HDA_OUTPUT),
+ */
{ } /* end */
};
@@ -2780,6 +2794,35 @@ static int stac92xx_auto_create_beep_ctls(struct
hda_codec *codec,
return 0;
}
+/* labels for mux inputs */
+static const char *stac92xx_mux_labels[4] = {
+ "Capture Mux 1", "Capture Mux 2", "Capture Mux 3",
+ "Capture Mux 4"
+};
+
+static int stac92xx_auto_create_mux_input_ctls(struct hda_codec *codec)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ int wcaps, nid, i, err = 0;
+ char name[32];
+
+ for (i = 0; i < spec->num_muxes; i++) {
+ nid = spec->mux_nids[i];
+ wcaps = get_wcaps(codec, nid);
+
+ if (wcaps & AC_WCAP_OUT_AMP) {
+ sprintf(name, "%s Capture Volume",
+ stac92xx_mux_labels[i]);
+ err = stac92xx_add_control(spec,
+ STAC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
+ if (err < 0)
+ return err;
+ }
+ }
+ return 0;
+};
+
/* labels for dmic mux inputs */
static const char *stac92xx_dmic_labels[5] = {
"Analog Inputs", "Digital Mic 1", "Digital Mic 2",
@@ -3078,6 +3121,11 @@ static int stac92xx_parse_auto_config(struct hda_codec
*codec, hda_nid_t dig_out
if ((err = stac92xx_auto_create_dmic_input_ctls(codec,
&spec->autocfg)) < 0)
return err;
+ if (spec->num_muxes > 0) {
+ err = stac92xx_auto_create_mux_input_ctls(codec);
+ if (err < 0)
+ return err;
+ }
spec->multiout.max_channels = spec->multiout.num_dacs * 2;
if (spec->multiout.max_channels > 2)
next reply other threads:[~2008-08-14 16:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-14 16:03 Matthew Ranostay [this message]
2008-08-14 16:46 ` [PATCH] hda: dynamically create capture mux contols Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48A45754.3040504@embeddedalley.com \
--to=mranostay@embeddedalley.com \
--cc=alsa-devel@alsa-project.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.