All of lore.kernel.org
 help / color / mirror / Atom feed
From: Barry Quiel <quielb@ecst.csuchico.edu>
To: Steven Toth <stoth@linuxtv.org>
Cc: linux-dvb@linuxtv.org, Jay Modi <jaymode@gmail.com>
Subject: Re: [linux-dvb] Hauppauge HVR-1800 Analog issues
Date: Tue, 19 Aug 2008 20:33:44 -0700	[thread overview]
Message-ID: <48AB9098.1090700@ecst.csuchico.edu> (raw)
In-Reply-To: <48AB3507.8030302@linuxtv.org>

Steven Toth wrote:
> Jay Modi wrote:
>> On Tue, Aug 19, 2008 at 12:51 PM, Barry Quiel 
>> <quielb@ecst.csuchico.edu <mailto:quielb@ecst.csuchico.edu>> wrote:
>>
>>
>>     I've got the same problem.  I'm running on a fedora 9 box, so at
>>     least that tells you its not OS related.
>>
>>     I posted this problem on the list a while back and didn't get any
>>     response.  Here is my post out of the archives:
>>
>>     http://linuxtv.org/pipermail/linux-dvb/2008-July/027367.html
>>     http://linuxtv.org/pipermail/linux-dvb/2008-August/027670.html
>>
>>     It makes me feel a little bit better that its not just me.
>>
>>
>>
>> I am glad to know someone else has this error too.
>>
>> For the devs, is there anything Barry and I can do to help 
>> diagnose/test/fix this problem?
> 
> # make unload
> # modprobe cx25840 debug=1
> # modprobe cx23885 debug=1
> 
> Then cat /dev/video1 >test.mpg
> 
> Better?
> 
> - Steve
> 

I pulled the PVR-500 and rebooted.  Modprob and all that, still no video 
just static.

Here is syslog:
Aug 19 20:29:30 myth-mbe kernel: ACPI: PCI interrupt for device 
0000:01:00.0 disabled
Aug 19 20:30:27 myth-mbe kernel: Linux video capture interface: v2.00
Aug 19 20:30:27 myth-mbe kernel: cx23885 driver version 0.0.1 loaded
Aug 19 20:30:27 myth-mbe kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> 
GSI 16 (level, low) -> IRQ 16
Aug 19 20:30:27 myth-mbe kernel: CORE cx23885[0]: subsystem: 0070:7801, 
board: Hauppauge WinTV-HVR1800 [card=2,autodetected]
Aug 19 20:30:27 myth-mbe kernel: cx23885[0]: i2c bus 0 registered
Aug 19 20:30:27 myth-mbe kernel: cx23885[0]: i2c bus 1 registered
Aug 19 20:30:27 myth-mbe kernel: cx25840' 3-0044: cx25  0-21 found @ 
0x88 (cx23885[0])
Aug 19 20:30:27 myth-mbe kernel: cx23885[0]: i2c bus 2 registered
Aug 19 20:30:27 myth-mbe kernel: tveeprom 1-0050: Hauppauge model 78521, 
rev C1E9, serial# 2967259
Aug 19 20:30:27 myth-mbe kernel: tveeprom 1-0050: MAC address is 
00-0D-FE-2D-46-DB
Aug 19 20:30:27 myth-mbe kernel: tveeprom 1-0050: tuner model is Philips 
18271_8295 (idx 149, type 54)
Aug 19 20:30:27 myth-mbe kernel: tveeprom 1-0050: TV standards NTSC(M) 
ATSC/DVB Digital (eeprom 0x88)
Aug 19 20:30:27 myth-mbe kernel: tveeprom 1-0050: audio processor is 
CX23887 (idx 42)
Aug 19 20:30:27 myth-mbe kernel: tveeprom 1-0050: decoder processor is 
CX23887 (idx 37)
Aug 19 20:30:27 myth-mbe kernel: tveeprom 1-0050: has radio
Aug 19 20:30:27 myth-mbe kernel: cx23885[0]: hauppauge eeprom: model=78521
Aug 19 20:30:27 myth-mbe kernel: cx23885[0]/0: registered device video0 
[v4l2]
Aug 19 20:30:28 myth-mbe kernel: cx25840' 3-0044: loaded 
v4l-cx23885-avcore-01.fw firmware (16382 bytes)
Aug 19 20:30:28 myth-mbe kernel: cx23885[0]: registered device video1 [mpeg]
Aug 19 20:30:28 myth-mbe kernel: cx23885[0]: cx23885 based dvb card
Aug 19 20:30:28 myth-mbe kernel: MT2131: successfully identified at 
address 0x61
Aug 19 20:30:28 myth-mbe kernel: DVB: registering new adapter (cx23885[0])
Aug 19 20:30:28 myth-mbe kernel: DVB: registering frontend 0 (Samsung 
S5H1409 QAM/8VSB Frontend)...
Aug 19 20:30:28 myth-mbe kernel: cx23885_dev_checkrevision() Hardware 
revision = 0xb1
Aug 19 20:30:28 myth-mbe kernel: cx23885[0]/0: found at 0000:01:00.0, 
rev: 15, irq: 16, latency: 0, mmio: 0x90000000
Aug 19 20:31:05 myth-mbe kernel: Firmware and/or mailbox pointer not 
initialized or corrupted, signature = 0xffffffff, cmd = PING_FW


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

  parent reply	other threads:[~2008-08-20  3:34 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-08-18 23:14 [linux-dvb] Hauppauge HVR-1800 Analog issues Jay Modi
2008-08-19 16:51 ` Barry Quiel
2008-08-19 20:45   ` Jay Modi
2008-08-19 21:03     ` Steven Toth
2008-08-19 21:23       ` Jay Modi
2008-08-19 21:40         ` Steven Toth
2008-08-19 22:22           ` Jay Modi
2008-08-20  0:41             ` Brian Steele
2008-08-20  3:33       ` Barry Quiel [this message]
2008-08-20  3:51         ` Steven Toth
2008-08-20  4:31           ` Barry Quiel
2008-08-22 17:10             ` Barry Quiel
  -- strict thread matches above, loose matches on Subject: below --
2008-08-22 20:18 William Austin
2008-08-25 14:40 ` Steven Toth
2008-08-24  2:30 Dustin Coates
2008-08-24 13:51 ` Steven Toth
2008-08-24 20:50   ` Dustin Coates
2008-08-25 14:43     ` Steven Toth
2008-12-08  2:28 Josh Borke
2008-12-08  4:00 ` Jeff DeFouw
2008-12-08 14:03   ` Josh Borke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48AB9098.1090700@ecst.csuchico.edu \
    --to=quielb@ecst.csuchico.edu \
    --cc=jaymode@gmail.com \
    --cc=linux-dvb@linuxtv.org \
    --cc=stoth@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.