From: Jan Kiszka <jan.kiszka@siemens.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [RESEND][PATCH 6/13] Switch self-modified code recompilation to next_cflags
Date: Wed, 20 Aug 2008 16:54:13 +0200 [thread overview]
Message-ID: <48AC3015.3000409@siemens.com> (raw)
In-Reply-To: <48AC2E09.3030405@siemens.com>
Switching tb_invalidate_phys_page_range and tb_invalidate_phys_page over
to the new next_cflags scheme when self-modifying code was detected can
save a few lines of code and remove arch dependency.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
exec.c | 32 ++++----------------------------
1 file changed, 4 insertions(+), 28 deletions(-)
Index: b/exec.c
===================================================================
--- a/exec.c
+++ b/exec.c
@@ -851,12 +851,11 @@ TranslationBlock *tb_gen_code(CPUState *
void tb_invalidate_phys_page_range(target_phys_addr_t start, target_phys_addr_t end,
int is_cpu_write_access)
{
- int n, current_tb_modified, current_tb_not_found, current_flags;
+ int n, current_tb_modified, current_tb_not_found;
CPUState *env = cpu_single_env;
PageDesc *p;
TranslationBlock *tb, *tb_next, *current_tb, *saved_tb;
target_ulong tb_start, tb_end;
- target_ulong current_pc, current_cs_base;
p = page_find(start >> TARGET_PAGE_BITS);
if (!p)
@@ -873,9 +872,6 @@ void tb_invalidate_phys_page_range(targe
current_tb_not_found = is_cpu_write_access;
current_tb_modified = 0;
current_tb = NULL; /* avoid warning */
- current_pc = 0; /* avoid warning */
- current_cs_base = 0; /* avoid warning */
- current_flags = 0; /* avoid warning */
tb = p->first_tb;
while (tb != NULL) {
n = (long)tb & 3;
@@ -912,14 +908,6 @@ void tb_invalidate_phys_page_range(targe
current_tb_modified = 1;
cpu_restore_state(current_tb, env,
env->mem_io_pc, NULL);
-#if defined(TARGET_I386)
- current_flags = env->hflags;
- current_flags |= (env->eflags & (IOPL_MASK | TF_MASK | VM_MASK));
- current_cs_base = (target_ulong)env->segs[R_CS].base;
- current_pc = current_cs_base + env->eip;
-#else
-#error unsupported CPU
-#endif
}
#endif /* TARGET_HAS_PRECISE_SMC */
/* we need to do that to handle the case where a signal
@@ -953,7 +941,7 @@ void tb_invalidate_phys_page_range(targe
modifying the memory. It will ensure that it cannot modify
itself */
env->current_tb = NULL;
- tb_gen_code(env, current_pc, current_cs_base, current_flags, 1);
+ env->next_cflags = 1;
cpu_resume_from_signal(env, NULL);
}
#endif
@@ -992,8 +980,7 @@ static inline void tb_invalidate_phys_pa
static void tb_invalidate_phys_page(target_phys_addr_t addr,
unsigned long pc, void *puc)
{
- int n, current_flags, current_tb_modified;
- target_ulong current_pc, current_cs_base;
+ int n, current_tb_modified;
PageDesc *p;
TranslationBlock *tb, *current_tb;
#ifdef TARGET_HAS_PRECISE_SMC
@@ -1007,9 +994,6 @@ static void tb_invalidate_phys_page(targ
tb = p->first_tb;
current_tb_modified = 0;
current_tb = NULL;
- current_pc = 0; /* avoid warning */
- current_cs_base = 0; /* avoid warning */
- current_flags = 0; /* avoid warning */
#ifdef TARGET_HAS_PRECISE_SMC
if (tb && pc != 0) {
current_tb = tb_find_pc(pc);
@@ -1029,14 +1013,6 @@ static void tb_invalidate_phys_page(targ
current_tb_modified = 1;
cpu_restore_state(current_tb, env, pc, puc);
-#if defined(TARGET_I386)
- current_flags = env->hflags;
- current_flags |= (env->eflags & (IOPL_MASK | TF_MASK | VM_MASK));
- current_cs_base = (target_ulong)env->segs[R_CS].base;
- current_pc = current_cs_base + env->eip;
-#else
-#error unsupported CPU
-#endif
}
#endif /* TARGET_HAS_PRECISE_SMC */
tb_phys_invalidate(tb, addr);
@@ -1049,7 +1025,7 @@ static void tb_invalidate_phys_page(targ
modifying the memory. It will ensure that it cannot modify
itself */
env->current_tb = NULL;
- tb_gen_code(env, current_pc, current_cs_base, current_flags, 1);
+ env->next_cflags = 1;
cpu_resume_from_signal(env, puc);
}
#endif
next prev parent reply other threads:[~2008-08-20 16:18 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-03 15:50 [Qemu-devel] [PATCH 0/13] Enhance debugging support - 2nd take Jan Kiszka
2008-07-03 15:56 ` [Qemu-devel] [PATCH 1/13] Return appropriate watch message to gdb Jan Kiszka
2008-07-03 15:57 ` [Qemu-devel] [PATCH 2/13] Refactor and enhance break/watchpoint API Jan Kiszka
2008-07-03 15:58 ` [Qemu-devel] [PATCH 3/13] Set mem_io_vaddr on io_read Jan Kiszka
2008-07-03 15:58 ` [Qemu-devel] [PATCH 4/13] Respect length of watchpoints Jan Kiszka
2008-07-03 15:59 ` [Qemu-devel] [PATCH 5/13] Introduce next_cflags Jan Kiszka
2008-07-04 22:03 ` [Qemu-devel] [PATCH 5/13] Introduce next_cflags - v2 Jan Kiszka
2008-07-03 15:59 ` [Qemu-devel] [PATCH 6/13] Switch self-modified code recompilation to next_cflags Jan Kiszka
2008-07-03 16:00 ` [Qemu-devel] [PATCH 7/13] Restore pc on watchpoint hits Jan Kiszka
2008-07-04 20:49 ` Paul Brook
2008-07-04 21:15 ` [Qemu-devel] " Jan Kiszka
2008-07-03 16:00 ` [Qemu-devel] [PATCH 8/13] Remove premature memop TB terminations Jan Kiszka
2008-07-03 16:01 ` [Qemu-devel] [PATCH 9/13] Improve debugging of SMP guests Jan Kiszka
2008-07-03 16:02 ` [Qemu-devel] [PATCH 10/13] Introduce BP_WATCHPOINT_HIT flag Jan Kiszka
2008-07-03 16:02 ` [Qemu-devel] [PATCH 11/13] Add debug exception hook Jan Kiszka
2008-07-03 16:03 ` [Qemu-devel] [PATCH 12/13] Introduce BP_CPU as a breakpoint type Jan Kiszka
2008-07-03 16:03 ` [Qemu-devel] [PATCH 13/13] x86: Debug register emulation Jan Kiszka
2008-07-11 10:40 ` [Qemu-devel] Re: [PATCH 0/13] Enhance debugging support - 2nd take Jan Kiszka
2008-08-20 14:45 ` [Qemu-devel] [RESEND][PATCH " Jan Kiszka
2008-08-20 14:47 ` [Qemu-devel] [RESEND][PATCH 1/13] Return appropriate watch message to gdb Jan Kiszka
2008-08-20 14:49 ` [Qemu-devel] [RESEND][PATCH 2/13] Refactor and enhance break/watchpoint API Jan Kiszka
2008-09-07 2:14 ` Anthony Liguori
2008-09-07 7:15 ` Aurelien Jarno
2008-09-08 8:42 ` [Qemu-devel] " Jan Kiszka
2008-09-07 19:11 ` [Qemu-devel] " Blue Swirl
2008-09-08 8:43 ` [Qemu-devel] " Jan Kiszka
2008-09-15 13:22 ` Jan Kiszka
2008-09-08 20:07 ` Jan Kiszka
2008-08-20 14:50 ` [Qemu-devel] [RESEND][PATCH 3/13] Set mem_io_vaddr on io_read Jan Kiszka
2008-08-20 14:51 ` [Qemu-devel] [RESEND][PATCH 4/13] Respect length of watchpoints Jan Kiszka
2008-08-20 14:52 ` [Qemu-devel] [RESEND][PATCH 5/13] Introduce next_cflags Jan Kiszka
2008-08-20 14:54 ` Jan Kiszka [this message]
2008-08-20 14:56 ` [Qemu-devel] [RESEND][PATCH 7/13] Restore pc on watchpoint hits Jan Kiszka
2008-08-20 14:57 ` [Qemu-devel] [RESEND][PATCH 8/13] Remove premature memop TB terminations Jan Kiszka
2008-08-20 14:59 ` [Qemu-devel] [RESEND][PATCH 10/13] Introduce BP_WATCHPOINT_HIT flag Jan Kiszka
2008-08-20 15:00 ` [Qemu-devel] [RESEND][PATCH 11/13] Add debug exception hook Jan Kiszka
2008-08-20 15:01 ` [Qemu-devel] [RESEND][PATCH 12/13] Introduce BP_CPU as a breakpoint type Jan Kiszka
2008-08-20 15:02 ` [Qemu-devel] [RESEND][PATCH 13/13] x86: Debug register emulation Jan Kiszka
2008-08-20 15:04 ` [Qemu-devel] [RESEND][PATCH 9/13] Improve debugging of SMP guests Jan Kiszka
2008-08-21 20:19 ` [Qemu-devel] [RESEND][PATCH 0/13] Enhance debugging support - 2nd take Anthony Liguori
2008-08-21 22:53 ` [Qemu-devel] " Jan Kiszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48AC3015.3000409@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.