From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <48B67A99.9050301@domain.hid> Date: Thu, 28 Aug 2008 12:14:49 +0200 From: Jan Kiszka MIME-Version: 1.0 References: <131064.26848.qm@domain.hid> In-Reply-To: <131064.26848.qm@domain.hid> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Subject: Re: [Xenomai-core] Kernel 2.6.26 Hung With Xenomai 2.4.5 List-Id: "Xenomai life and development \(bug reports, patches, discussions\)" List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: yasser_kashfi@domain.hid Cc: xenomai@xenomai.org Yasser Kashfi wrote: > Hi > I have a bad problem, please advise me if you have an solution. > I worked with older xenomai on Linux kernel 2.6.17 from one year ago and do not have any problem. but now, I decide to install xenomai-2.4.5 with Linux kernel 2.6.24 or 2.6.25 or 2.6.26 on SUSE. > after compile and install all things :), when boot the new kernel, I some times see the cursor stop flashing and kernel hung. another problem, when I run the my program (xenomai user space task ) see kernel oop and kernel panic :( . > > I glad to see your comments. The usual advices: - please provide your .config - try to check if the kernel also hangs when only the ipipe patch is applied and activated - use a serial console to capture any oopses you can get hold of, then post them Jan -- Siemens AG, Corporate Technology, CT SE 2 Corporate Competence Center Embedded Linux