From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <48BEC35C.3050101@domain.hid>
Date: Wed, 03 Sep 2008 19:03:24 +0200
From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
MIME-Version: 1.0
References: <48BD5968.6050309@domain.hid> <48BD7ACC.7060100@domain.hid>
	<48BD905A.2080008@domain.hid> <48BEAC77.9020504@domain.hid>
In-Reply-To: <48BEAC77.9020504@domain.hid>
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Subject: Re: [Xenomai-help] using a pcmcia parallel port card
List-Id: Help regarding installation and common use of Xenomai
	<xenomai.xenomai.org>
List-Unsubscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
List-Archive: </public/xenomai-help>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-help-request@domain.hid>
List-Subscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
To: Theo Veenker <Theo.Veenker@domain.hid>
Cc: xenomai@xenomai.org

Theo Veenker wrote:
> I'm glad to say from a linux test program I can access this pcmcia card
> just like the regular parallel port. Apparently the card doesn't have
> internal pull-ups on the status lines (like the regular port does) so
> my switches to ground connected to the status lines had little effect.
> Adding external pull-ups fixed that.

Well, it was just a wild guess... Sorry for the noise.

-- 
                                                 Gilles.