From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dean Loros Date: Mon, 08 Sep 2008 03:32:46 +0000 Subject: [lm-sensors] EVGA nForce 750i motherboard Message-Id: <48C49CDE.7090800@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org I have just setup a EVGA nForce 750i motherboard for Ubuntu (8.10 testing) & have several ALARM sections. Question is how do I just report the voltages/fan speeds without alarms? I am using 3.02 supplied by Ubuntu--listed as sensors are: lm78-i2c-1-2d, w83627dhg-isa-0290, coretemp & acpitz-virtual-0 The coretemp & acpitz-virtual-0 are working in range--most of the readings for the lm78 & w83627dhg are throwing alarms even after I spread the voltage/fanspeed ranges. Output follows: acpitz-virtual-0 Adapter: Virtual device temp1: +40.0=B0C (crit =3D +60.0=B0C) lm78-i2c-1-2d Adapter: SMBus nForce2 adapter at 1c80 VCore 1: +2.53 V (min =3D +2.18 V, max =3D +3.25 V) VCore 2: +2.10 V (min =3D +1.86 V, max =3D +3.25 V) ALARM +3.3V: +3.31 V (min =3D +2.30 V, max =3D +3.47 V) ALARM +5V: +3.31 V (min =3D +3.50 V, max =3D +4.08 V) ALARM +12V: +2.56 V (min =3D +4.08 V, max =3D +4.08 V) ALARM -12V: +3.10 V (min =3D +0.00 V, max =3D +0.00 V) ALARM -5V: +3.66 V (min =3D +0.00 V, max =3D +0.00 V) ALARM fan1: 2986 RPM (min =3D 2657 RPM, div =3D 2) ALARM fan2: 2556 RPM (min =3D 998 RPM, div =3D 8) ALARM fan3: 4963 RPM (min =3D 10714 RPM, div =3D 2) ALARM temp1: +98.0=B0C (high =3D +100.0=B0C, hyst =3D +120.0=B0C) ALARM cpu0_vid: +3.100 V w83627dhg-isa-0290 Adapter: ISA adapter VCore: +1.26 V (min =3D +1.09 V, max =3D +1.62 V) in1: +6.86 V (min =3D +6.12 V, max =3D +10.72 V) AVCC: +3.31 V (min =3D +2.30 V, max =3D +3.47 V) 3VCC: +3.31 V (min =3D +3.50 V, max =3D +4.08 V) ALARM in4: +1.28 V (min =3D +2.04 V, max =3D +2.04 V) ALARM in5: +1.55 V (min =3D +0.00 V, max =3D +0.00 V) ALARM in6: +5.86 V (min =3D +0.00 V, max =3D +0.00 V) ALARM VSB: +3.31 V (min =3D +1.57 V, max =3D +0.02 V) ALARM VBAT: +3.02 V (min =3D +0.10 V, max =3D +1.54 V) ALARM Case Fan: 3000 RPM (min =3D 2657 RPM, div =3D 2) CPU Fan: 2556 RPM (min =3D 998 RPM, div =3D 8) Aux Fan: 1240 RPM (min =3D 2678 RPM, div =3D 8) ALARM fan4: 1622 RPM (min =3D 912 RPM, div =3D 8) fan5: 0 RPM (min =3D 0 RPM, div =3D 128) ALARM Sys Temp: +98.0=B0C (high =3D +100.0=B0C, hyst =3D +120.0=B0C) sensor = thermistor CPU Temp: +52.5=B0C (high =3D +127.0=B0C, hyst =3D +0.0=B0C) sensor = =3D transistor AUX Temp: +37.0=B0C (high =3D +127.0=B0C, hyst =3D +0.0=B0C) sensor = =3D thermistor coretemp-isa-0000 Adapter: ISA adapter Core 0: +60.0=B0C (high =3D +80.0=B0C, crit =3D +100.0=B0C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +61.0=B0C (high =3D +80.0=B0C, crit =3D +100.0=B0C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +64.0=B0C (high =3D +80.0=B0C, crit =3D +100.0=B0C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +65.0=B0C (high =3D +80.0=B0C, crit =3D +100.0=B0C) _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors