From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dean Loros Date: Mon, 08 Sep 2008 13:58:02 +0000 Subject: Re: [lm-sensors] EVGA nForce 750i motherboard Message-Id: <48C52F6A.2040502@gmail.com> List-Id: References: <48C49CDE.7090800@gmail.com> In-Reply-To: <48C49CDE.7090800@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Updated info below---- Jean Delvare wrote: > On Mon, 08 Sep 2008 01:48:39 -0700, Dean Loros wrote: >> Hi Jean--- >> >> Unloaded both. Dump for isadump 0x295 0x296: >> >> dean@linux:~/Desktop$ sudo isadump 0x295 0x296 >> [sudo] password for dean: >> WARNING! Running this program can cause system crashes, data loss and wo= rse! >> I will probe address register 0x295 and data register 0x296. >> Continue? [Y/n] y >> 0 1 2 3 4 5 6 7 8 9 a b c d e f >> 00: 04 ff 04 21 31 00 1e 50 01 02 01 02 3c 3c 0a 0a >> 10: 04 ff 50 00 00 01 01 3c 43 07 00 00 ff ff ff d8 >> 20: a0 83 d0 d0 a0 c2 e6 5a e1 41 ff cb 88 cb 74 d9 >> 30: 90 ff db ff fe 00 00 00 01 00 7f fe a9 3f b9 68 >> 40: 01 de 1f ff ff ff 07 d4 2d 00 40 44 18 15 01 a3 >> 50: 21 80 02 00 00 7f 05 e0 ff ff ff ff ff ff ff ff >> 60: 04 40 33 1e 02 02 3c ff 1f ff 1f ff ff ff ff ff >> 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >> 80: 04 ff 04 21 31 00 1e 50 01 02 01 02 3c 3c 0a 0a >> 90: 04 ff 50 00 00 01 01 3c 43 07 00 00 ff ff ff d8 >> a0: a0 83 d0 d0 a0 c2 e6 5a e1 41 ff cb 88 cb 74 d9 >> b0: 90 ff db ff fe 00 00 00 01 00 7f fe a9 3f b9 68 >> c0: 01 00 10 ff ff ff 07 d4 2d 00 40 44 18 15 01 a3 >> d0: 21 80 02 00 00 7f 05 e0 ff ff ff ff ff ff ff ff >> e0: 04 40 33 1e 02 02 3c ff 1f ff 1f ff ff ff ff ff >> f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >> >> Interesting about i2cdump 1 0x2d b: >> >> dean@linux:~/Desktop$ sudo i2cdump 1 0x2d b >> sudo: i2cdump: command not found >=20 > i2cdump is no longer part of lm-sensors and is now part of a separate > package named i2c-tools. Please install that package first and then you > should have i2cdump. When you have it, please run the isadump command > as well, it's better to have both dumps done at the same time for > comparison purposes. dean@linux:~/Desktop$ sudo i2cdump 1 0x2d b [sudo] password for dean: Error: Could not open file `/dev/i2c-1' or `/dev/i2c/1': No such file or directory dean@linux:~/Desktop$ sudo isadump Syntax for I2C-like access: isadump [-y] [-k V1,V2...] ADDRREG DATAREG [BANK [BANKREG]] Syntax for flat address space: isadump [-y] -f ADDRESS [RANGE [BANK [BANKREG]]] Still problems there---please tell me the range you need >=20 >> I got from BIOS: >> CPU temp@c >> board temp5c >> >> So I don't know where the 98c is coming from.... >=20 > Could be that temp1 isn't wired at all. Does it change in a consistent > way depending in the system load? Not really--only seems to vary about 10c I suspect that temp2 is the CPU > temperature and temp3 is the system temperature on your system. This > would lead to the following configuration section: >=20 > label temp2 "CPU Temp" > label temp3 "Sys Temp" >=20 > set temp2_max 62 > set temp2_max_hyst 58 > set temp3_max 45 > set temp3_max_hyst 42 >=20 > And if you can't make sense of temp1, you can add: >=20 > ignore temp1 >=20 >> After reloading the w83627ehf I get: >> >> dean@linux:~/Desktop$ sensors >> acpitz-virtual-0 >> Adapter: Virtual device >> temp1: +40.0=B0C (crit =3D +60.0=B0C) >> >> coretemp-isa-0000 >> Adapter: ISA adapter >> Core 0: +39.0=B0C (high =3D +80.0=B0C, crit =3D +100.0=B0C) >> >> coretemp-isa-0001 >> Adapter: ISA adapter >> Core 1: +46.0=B0C (high =3D +80.0=B0C, crit =3D +100.0=B0C) >> >> coretemp-isa-0002 >> Adapter: ISA adapter >> Core 2: +42.0=B0C (high =3D +80.0=B0C, crit =3D +100.0=B0C) >> >> coretemp-isa-0003 >> Adapter: ISA adapter >> Core 3: +44.0=B0C (high =3D +80.0=B0C, crit =3D +100.0=B0C) >> >> w83627dhg-isa-0290 >> Adapter: ISA adapter >> VCore: +1.27 V (min =3D +1.09 V, max =3D +1.62 V) >> in1: +6.92 V (min =3D +6.12 V, max =3D +10.72 V) >> AVCC: +3.33 V (min =3D +2.30 V, max =3D +3.47 V) >> 3VCC: +3.33 V (min =3D +3.50 V, max =3D +4.08 V) ALARM >> in4: +1.28 V (min =3D +2.03 V, max =3D +2.04 V) ALARM >> in5: +1.55 V (min =3D +0.00 V, max =3D +0.00 V) ALARM >> in6: +5.89 V (min =3D +0.03 V, max =3D +0.00 V) ALARM >> VSB: +3.33 V (min =3D +1.57 V, max =3D +0.02 V) ALARM >> VBAT: +3.02 V (min =3D +0.10 V, max =3D +1.54 V) ALARM >> Case Fan: 3000 RPM (min =3D 2657 RPM, div =3D 2) >> CPU Fan: 2556 RPM (min =3D 998 RPM, div =3D 8) >> Aux Fan: 0 RPM (min =3D 10887 RPM, div =3D 4) ALARM >> fan4: 1638 RPM (min =3D 912 RPM, div =3D 8) >> fan5: 0 RPM (min =3D 0 RPM, div =3D 2) ALARM >> Sys Temp: +90.0=B0C (high =3D +0.0=B0C, hyst =3D +127.0=B0C) senso= r =3D thermistor >> CPU Temp: +33.0=B0C (high =3D +127.0=B0C, hyst =3D +0.0=B0C) senso= r =3D transistor >> AUX Temp: +34.5=B0C (high =3D +127.0=B0C, hyst =3D +0.0=B0C) senso= r =3D thermistor >> >> >> Sensors is not reading a critical fan speed--nForce northbridge. >=20 > Is the BIOS displaying it? How many wires does this fan have? Yes--it is a three-wire connector >=20 > Remember that the default labels in sensors3.conf may not match your > motherboard. Understood >=20 > Also, the w83627ehf driver is adjusting the fan clock divisors > automatically, so it may take a couple runs of "sensors" before fan > speeds show. Understood--as you can see, there are two speeds not showing--I would guess that it "should" be one of those, but they do not have speed outputs still. The Northbridge speed is around 2000 in the BIOS. >=20 >> Sensors-detect requested that both the lm78 & w83627ehf get >> loaded..running the latest Ubuntu kernel 2.6.27-2-generic >=20 > OK. When I received your dumps, I'll fix sensors-detect so that it > handles this case properly and no longer suggest the lm78 driver. I'll > also update fix the lm78 driver so that it refuses to attach to > W83627EHF and DHG chips. >=20 > Thanks, _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors