Re: [PATCH 02/18] ide: use I/O ops directly in ide-dma.c

[Sergei Shtylyov <sshtylyov@ru.mvista.com>]

Bartlomiej Zolnierkiewicz wrote:

> Use I/O ops directly in ide_dma_host_set(), ide_dma_setup(),
> ide_dma_start() and __ide_dma_end().

> There should be no functional changes caused by this patch.

> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
[...]
> Index: b/drivers/ide/ide-dma.c
> ===================================================================
> --- a/drivers/ide/ide-dma.c
> +++ b/drivers/ide/ide-dma.c
> @@ -376,7 +376,10 @@ void ide_dma_host_set(ide_drive_t *drive
>  	else
>  		dma_stat &= ~(1 << (5 + unit));
>  
> -	hwif->OUTB(dma_stat, hwif->dma_status);
> +	if (hwif->host_flags & IDE_HFLAG_MMIO)
> +		writeb(dma_stat, (void __iomem *)hwif->dma_status);
> +	else
> +		outb(dma_stat, hwif->dma_status);
>  }
>  
>  EXPORT_SYMBOL_GPL(ide_dma_host_set);
> @@ -470,13 +474,20 @@ int ide_dma_setup(ide_drive_t *drive)
[...]
>  	/* read DMA status for INTR & ERROR flags */
>  	dma_stat = hwif->read_sff_dma_status(hwif);
>  
>  	/* clear INTR & ERROR flags */
> -	hwif->OUTB(dma_stat|6, hwif->dma_status);
> +	if (mmio)
> +		writeb(dma_stat | 6, (void __iomem *)hwif->dma_status);
> +	else
> +		outb(dma_stat | 6, hwif->dma_status);
> +
>  	drive->waiting_for_dma = 1;
>  	return 0;
>  }
> @@ -511,18 +529,31 @@ EXPORT_SYMBOL_GPL(ide_dma_start);
[...]
>  	/* get DMA status */
>  	dma_stat = hwif->read_sff_dma_status(hwif);
> -	/* clear the INTR & ERROR bits */
> -	hwif->OUTB(dma_stat|6, hwif->dma_status);
> +
> +	if (mmio)
> +		/* clear the INTR & ERROR bits */
> +		writeb(dma_stat | 6, (void __iomem *)hwif->dma_status);
> +	else
> +		outb(dma_stat | 6, hwif->dma_status);
> +

    Seems like the above 3 sequences are asking to be factored out into 
ide_dma_write_status(); with the latter two possibly factored out into 
ide_dma_clear_status(). I'm making a notch if you don't mind (or beat me to it 
:-)...

MBR, Sergei