From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH][for 1.3.5] Fix handling of mem reserves for ramdisk
Date: Wed, 10 Sep 2008 10:19:23 +0200 [thread overview]
Message-ID: <48C7830B.6010205@denx.de> (raw)
In-Reply-To: <5B2093C2-FD97-4F42-8055-04A958FF4DFF@kernel.crashing.org>
Hello Kumar,
Kumar Gala wrote:
> On Sep 8, 2008, at 9:10 AM, Wolfgang Denk wrote:
>> Dear Kumar Gala,
>>
>> In message <6E892604-9B2A-4338-8DF7-C58688FC5A94@kernel.crashing.org>
>> you wrote:
>>>
>>> The reason we had the code before was to try and make sure the size of
>>> the fdt was as close to its final size as possible before we dealt
>>> with the ramdisk relocation (boot_ramdisk_high()) that included the
>>> properties and the memreserve in the fdt. Step's a)-c) are there to
>>> make sure the size is correct.
>>
>> Well, but the size needed for this should be a constant, so it should
>> be sufficioent to determine it once and then use a hard coded
>> constant; eventually add some padding.
>>
>> Doing this in runtime is a waste of resources (flash memory, RAM, and
>> time - not to mention human time for maintaining the code).
>
> I'm ok with determining the size bump and doing it that way.
[PATCH] powerpc: Fix bootm to boot up again with a Ramdisk
Patch
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=2a1a2cb6e2b87ee550e6f27b647d23331dfd5e1b#patch3
didnt remove the dummy mem reservation in fdt_chosen, and
this stopped Linux from booting with a Ramdisk. This patch
fixes this, by deleting the useless dummy mem reservation.
When booting with a Ramdisk, a fix offset FDT_RAMDISK_OVERHEAD
is now added to of_size, so we dont need anymore a dummy
mem reservation.
Signed-off-by: Heiko Schocher <hs@denx.de>
---
common/cmd_fdt.c | 3 ++-
common/fdt_support.c | 4 +---
include/fdt.h | 2 ++
include/fdt_support.h | 2 +-
lib_ppc/bootm.c | 8 ++++++--
5 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index 0593bad..288a5c4 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -450,7 +450,8 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
initrd_end = simple_strtoul(argv[3], NULL, 16);
}
- fdt_chosen(working_fdt, initrd_start, initrd_end, 1);
+ fdt_chosen(working_fdt, 1);
+ fdt_initrd(working_fdt, initrd_start, initrd_end, 1);
}
/* resize the fdt */
else if (strncmp(argv[1], "re", 2) == 0) {
diff --git a/common/fdt_support.c b/common/fdt_support.c
index a7773ab..8ceeb0f 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -165,7 +165,7 @@ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
return 0;
}
-int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force)
+int fdt_chosen(void *fdt, int force)
{
int nodeoffset;
int err;
@@ -215,8 +215,6 @@ int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force)
}
}
- fdt_initrd(fdt, initrd_start, initrd_end, force);
-
#ifdef CONFIG_OF_STDOUT_VIA_ALIAS
path = fdt_getprop(fdt, nodeoffset, "linux,stdout-path", NULL);
if ((path == NULL) || force)
diff --git a/include/fdt.h b/include/fdt.h
index 48ccfd9..d09efe9 100644
--- a/include/fdt.h
+++ b/include/fdt.h
@@ -57,4 +57,6 @@ struct fdt_property {
#define FDT_V16_SIZE FDT_V3_SIZE
#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(uint32_t))
+/* adding a ramdisk needs 0x44 bytes in version 2008-10 */
+#define FDT_RAMDISK_OVERHEAD 0x80
#endif /* _FDT_H */
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 424c3c6..ceaadc2 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -28,7 +28,7 @@
#include <fdt.h>
-int fdt_chosen(void *fdt, ulong initrd_start, ulong initrd_end, int force);
+int fdt_chosen(void *fdt, int force);
int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force);
void do_fixup_by_path(void *fdt, const char *path, const char *prop,
const void *val, int len, int create);
diff --git a/lib_ppc/bootm.c b/lib_ppc/bootm.c
index 348421f..d428fa1 100644
--- a/lib_ppc/bootm.c
+++ b/lib_ppc/bootm.c
@@ -145,8 +145,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
* if the user wants it (the logic is in the subroutines).
*/
if (of_size) {
- /* pass in dummy initrd info, we'll fix up later */
- if (fdt_chosen(of_flat_tree, images->rd_start, images->rd_end, 0) < 0) {
+ /* we dont have to pass anymore the dummy initrd info!
+ we'll add this later, immediately with the right values. */
+ if (fdt_chosen(of_flat_tree, 0) < 0) {
puts ("ERROR: ");
puts ("/chosen node create failed");
puts (" - must RESET the board to recover.\n");
@@ -169,6 +170,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
goto error;
of_size = ret;
+ /* adding a ramdisk needs 0x44 bytes in version 2008-10 */
+ if ((of_flat_tree) && (initrd_start && initrd_end))
+ of_size += FDT_RAMDISK_OVERHEAD;
/* Create a new LMB reservation */
lmb_reserve(lmb, (ulong)of_flat_tree, of_size);
}
--
1.5.4.1
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2008-09-10 8:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-06 5:57 [U-Boot] [PATCH][for 1.3.5] Fix handling of mem reserves for ramdisk Heiko Schocher
2008-09-08 14:02 ` Kumar Gala
2008-09-08 14:10 ` Wolfgang Denk
2008-09-08 15:57 ` Kumar Gala
2008-09-10 8:19 ` Heiko Schocher [this message]
2008-09-10 9:03 ` Wolfgang Denk
2008-09-09 6:18 ` Heiko Schocher
-- strict thread matches above, loose matches on Subject: below --
2008-09-05 16:13 Kumar Gala
2008-09-06 23:22 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48C7830B.6010205@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.